Using The Floppy Drive; To Install The Floppy Drive Internally - HP OmniBook 2000 User Manual

Using the Floppy Drive

You can install the floppy drive in the center drive bay or attach it externally to the
parallel port.
This section describes how to
Install the floppy drive internally.
Install the floppy drive externally.
Insert and remove a floppy disk.

To install the floppy drive internally

1. If necessary, remove the CD-ROM drive or super battery from the OmniBook.
2. Slide the floppy drive into the OmniBook until it clicks into place.
Floppy
disk drive
Using OmniBook Accessories
Using the Floppy Drive
1-9