Initiating Or Restoring From Hibernation - HP Compaq Presario,Presario X6000 Hardware And Software Manual

Initiating or Restoring from Hibernation

Task
Initiate
Hibernation
Allow the system
to initiate
Hibernation
(with Hibernation
enabled)
Restore from
user-initiated or
system-initiated
Hibernation
Hardware and Software Guide
Procedure
With the notebook on, use either
of the following procedures:
■ Briefly press the
power/standby button.
■ Select Start > Shut Down >
Hibernate. (If the Hibernate
option is not displayed, press
and hold shift
✎
If the notebook is in
Standby, you must resume
from Standby before you
can initiate Hibernation.
■ If the notebook is running on
battery power, the system
initiates Hibernation after
30 minutes of notebook
inactivity or when the
battery pack reaches a critical
low-battery condition.
■ If the notebook is running on
external power, the system will
not initiate Hibernation.
■ Change power settings and
timeouts in the Power Options
window.
Press the power/standby button.
✎
If the system initiated
Hibernation because of a
critical low-battery
condition, connect external
power or insert a charged
battery pack before you
press the power/standby
button.
.
)
Result
■ The power/standby
light is turned off.
■ The screen is cleared.
■ The power/standby
light is turned off.
■ The screen is cleared.
■ The power/standby
light is turned on.
■ Your work returns to
the screen.
Power
3–11