Reinstalling Device Drivers And Other; Software - HP Compaq Presario,Presario X6000 Hardware And Software Manual

Hp compaq presario,presario x6000: software guide
Hide thumbs Also See for Compaq Presario,Presario X6000:
Table of Contents

Advertisement

9. Press
10. Press
11. Select Format the partition using the NTFS file system
(Quick), and press
Ä
12. Press
instructions. (The reinstallation process begins. This process
may take up to 2 hours to complete. The notebook restarts in
Windows after the process is complete.)
13. Reinstall device drivers and software using the Application
and Driver Recovery disc, included with your notebook.
Refer to the following section,
and Other Software,"

Reinstalling Device Drivers and Other

Software

After the installation process is complete, you must reinstall
drivers and other software.
To reinstall drivers use the Application and Driver Recovery disc
included with the notebook:
1. While running Windows, insert the Application and Driver
Recovery disc into the optical drive.
If you do not have Autorun enabled, select Start > Run.
Then type
the optical drive).
2. Follow the on-screen instructions for installing drivers.
After the drivers are reinstalled, you must reinstall any software
you added to the notebook. Use the Application and Driver
Recovery disc, included with your notebook, or follow the
installation instructions provided with the software.
Hardware and Software Guide
to set up the operating system.
enter
to continue setup using this partition.
C
Formatting a drive will delete all current files.
to format the drive and follow the on-screen
F
D:\SWSETUP\APPINSTL\SETUP.EXE
Software Updates, Restorations and Utilities
enter.
"Reinstalling Device Drivers
for details.
(where
indicates
D
9–13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents