Disabling Or Restarting Digital Memory Cards; Increasing Memory - HP Compaq Presario,Presario X6000 Hardware And Software Manual

Hardware Options and Upgrades
Disabling or Restarting Digital
Memory Cards
An inserted digital card uses power even when the card is not
in use. Disabling the card conserves power.
To disable an inserted digital card:
1. Select the My Computer icon on the Windows Desktop.
2. Right-click the drive assigned to the card.
3. Select Eject. The card is stopped but is not released from the
Memory Reader.
To restart the card, remove and then reinsert it. For instructions,
see the
sections, earlier in this chapter.

Increasing Memory

You can increase the amount of RAM (random access memory)
in the notebook with an approved optional memory module.
Each notebook memory slot supports one 256-MB, 512-MB,
1024-MB, or 2048-MB DDR2 SODIMM memory module.
Some notebook models are shipped with one of the two memory
slots vacant. On other models the memory slot may contain a
preinstalled memory module that can be replaced at any time.
6–18
"Inserting Digital Cards" and "Removing Digital Cards"
Hardware and Software Guide