Initiating Or Restoring From Hibernation - HP Pavilion ZV6001 Hardware And Software Manual

Initiating or Restoring from Hibernation

Hibernation cannot be initiated unless it is enabled. Hibernation
is enabled by default. To verify that hibernation remains enabled:
»
Select Start > Control Panel > Performance and
Maintenance > Power Options > Hibernate tab. If
hibernation is enabled, the Enable hibernation check box
is selected.
Task
Initiate
hibernation.
Allow the
system to
initiate
hibernation.
Restore from
hibernation.
*In Windows XP Professional, depending on your network connections, the
Turn Off Computer button may be called the Shut Down button.
Hardware and Software Guide
Procedure
With the notebook on, use either of the
following procedures:
■ Briefly press the power button.
■ Select Start >Turn Off Computer.
Then hold down shift as you select
Stand By.*
No action is required. If the notebook is
running on battery power and
hibernation is enabled, the system
initiates hibernation
■ After 30 minutes of notebook
inactivity.
■ Whenever the battery pack reaches
a critical low-battery condition.
Press the power button.
✎
If the system initiated hibernation
because of a critical low-battery
condition, connect external
power or insert a charged battery
pack before you press the power
button. (The system may not
respond if the drained battery
pack is the only power source.)
Power
Result
■ Power/standby
lights are turned
off.
■ Screen is
cleared.
■ Power/standby
lights are turned
off.
■ Screen is
cleared.
■ Power/standbyligh
ts are turned on.
■ Your work is
returned to the
screen.
2–11