Initiating Or Restoring From Hibernation - HP Pavilion DV5000 User Manual

Initiating or restoring from hibernation

Hibernation cannot be initiated unless it is enabled. Hibernation is enabled by default.
To verify that hibernation remains enabled, Select Start > Control Panel > Performance and
Maintenance > Power Options > Hibernate tab. If hibernation is enabled, the Enable hibernation
check box is selected.
Task
Initiate hibernation.
Allow the system to initiate
hibernation (with
hibernation enabled).
Restore from user-initiated
or system-initiated
hibernation.
*If the system initiated hibernation because of a critical low-battery condition, connect external power or insert a
charged battery pack before you press the power button. (The system may not respond if the discharged battery pack
is the only power source.)
38 Chapter 3 Power
Procedure
●
Press the power button.
– or –
●
Select Start > Turn Off Computer. Then,
hold down the shift key as you select
Hibernate.
In Windows XP Professional, if hibernate
is not displayed:
a. Press the up or down arrow.
b. Select Hibernate from the list.
c. Click OK.
No action required. If the computer is running
on battery power, the system initiates hibernation
●
After 30 minutes of computer inactivity.
●
When the battery pack reaches a critical
low-battery condition.
Power settings and timeouts can be changed
using Power Options in Windows Control Panel.
Press the power button.*
Result
●
The power lights are turned off.
●
The screen clears.
●
The power lights are turned off.
●
The screen clears.
●
The power lights are turned on.
●
Your work returns to the screen.
ENWW