Memory Module - HP Compaq Presario,Presario B1201 Maintenance And Service Manual

Memory module

Description
2048-MB (PC2-5300, 667-MHz, DDR2)
1024-MB (PC2-5300, 667-MHz, DDR2)
512-MB (PC2-5300, 667-MHz, DDR2)
Before removing the memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the memory module:
Position the computer with the front toward you.
1.
Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the memory module compartment
2.
cover to the computer.
Lift the left side of the cover (2), swing it up and to the right, and remove the cover. The memory
3.
module compartment cover is included in the Plastics Kit, spare part number 454010-001.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
4.
(The edge of the module opposite the slot rises away from the computer.)
Battery on page 37).
Spare part number
417506-001
414046-001
414045-001
Component replacement procedures 43