Reinstalling Software Programs And Drivers; Reinstalling Preinstalled Programs And Drivers; Reinstalling Programs From Discs - HP Compaq Presario,Presario B1201 Maintenance And Service Manual

Reinstalling software programs and drivers

If a program or driver preinstalled at the factory is accidentally erased or is damaged, Recovery Manager
allows you to reinstall it.
NOTE:
Software not provided with this computer must be reinstalled from the disc provided by the
manufacturer or downloaded from the manufacturer's Web site.
NOTE:
Before reinstalling the program, be sure it is fully uninstalled.
Recovery Manager replaces corrupted system files and reinstalls deleted system files within the program.
● In most cases, if the program you are reinstalling is still on your computer, the reinstallation process
does not affect your personal settings.
In all cases, if a program has been deleted from your computer, the reinstallation process reinstalls
●
the program or utility to the factory image but cannot restore your personal settings.

Reinstalling preinstalled programs and drivers

Remove the program or driver:
1.
NOTE:
listed, it does not need to be removed.
Select Start > Control Panel > Programs > Uninstall a program.
a.
Right-click the program or driver you want to remove, and then click Uninstall.
b.
Reinstall the program or driver:
2.
Select Start > All Programs > Recovery Manager > Recovery Manager.
a.
Click Advanced Options.
b.
Click either Software program re-installation or Hardware driver re-installation,
c.
and then click Next.
Follow the on-screen instructions.
d.
Restart the computer if prompted.
e.

Reinstalling programs from discs

Insert the disc into the optical drive.
1.
When the installation wizard opens, follow the installation instructions on the screen.
2.
Restart the computer if prompted.
3.
In some cases, drivers are not listed in the Programs and Features list. If the driver is not
Recovering system information 117