Fan (see
i.
Heat sink (see
j.
Remove the processor:
Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
1.
until you hear a click.
Lift the processor (2) straight up and remove it.
2.
NOTE:
the triangle (4) embossed on the processor slot.
Reverse this procedure to install the processor.
80
Chapter 4 Removal and replacement procedures
Fan on page
75)
Heat sink on page
When you install the processor, the gold triangle (3) on the processor must be aligned with
77)
Comments to this Manuals
Latest comments: