Cleaning Inside the Roll Cover
About once a month, clean inside the roll cover to ensure optimal operation.
Also, clean inside the roll cover in the following situations.
• When a roll paper runs out
• After changing the roll paper
This explanation uses roll cover 1 as an example. Clean roll cover 2 in the same way.
Important
• When the sensor of the feed slot is dirty, the printer might not perform auto feeding properly. Even if the
sensor seems clean, we recommend cleaning it because it may have paper dust on it.
1.
1. Remove any roll paper.
Removing the Roll from the Printer
2.
2. Turn printer off.
Turning the Printer On and Off
3. Unplug power cord from outlet.
3.
Caution
• Always turn off the printer and unplug the power cord before cleaning or maintenance.
Accidentally leaving the printer on poses a risk of injury if you touch moving parts inside the
printer.
4. Open the roll cover.
4.
506