Canon TZ-5300 Online Manual page 99

1. 1. Rotate the holder stopper lever (A) towards
position (B), remove holder stopper from the roll holder.
2. 2. If using 3-inch core paper, align 3-Inch Paper Core Attachment tabs (A) with Roll Holder
holes (B) and insert firmly.
3. 3. With leading edge of roll paper facing forward as shown, insert Roll Holder from right side of
roll. Insert firmly until roll paper touches flange (A) of Roll Holder.
Important
• • When loading a roll, be careful to avoid hitting the printer hard with the roll. This may damage the
Roll Holder.
to release the lock, and while holding it in
99