Cutting Roll Paper After Printing - Canon TZ-5300 Online Manual

Cutting Roll Paper after Printing

The procedure for cutting roll paper automatically and printing cut guidelines is as follows:
1. Open the 1. printer driver setup window
2. 2. Select the paper source
For Paper Source on the Page Setup tab, select the setting that matches your purpose from Roll Paper
(Auto), Roll 1, and Roll 2.
3. 3. Display Roll Paper Options dialog box
Click Roll Paper Options to display the Roll Paper Options dialog box.
4. Set auto cut 4.
From Automatic Cutting, select the item that matches your purpose.
The current settings are displayed in the settings preview on the left side of the Page Setup tab.
• Yes •
The roll paper is cut automatically after printing.
• • No
The roll paper is not cut after printing.
• • Print Cut Guideline
Cut guidelines are printed for cutting the roll paper manually after printing.
691