Coaxial (Good) - Toshiba 55L510U18 Manual

32L310U18 / 49L510U18 / 55L510U18 32" 720p / 49" 1080p / 55" 1080p 60Hz LED TV

Coaxial (good)

On your TV
Coaxial cable
connector
ANT / CABLE IN
jack
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT / CABLE IN jack on the back of your TV and to the coaxial out jack
on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the Input Selection list.
6 Press or to highlight ANT / CABLE, then press ENTER.
7 If you cannot tune to channels you know exist, scan for channels. See
page 56.
Notes
22
Cable or
satellite box
Cable
wall jack
• Use a coaxial cable to eliminate interference and noise from radio
waves.
• Do not bundle the coaxial cable with the power cord or other cables.
Coaxial cable
Back of TV
www.tv.toshiba.com
Automatically scanning for channels on