Manually adding channels to the channel list
Channels with weak signals may not be added to the
channel list when you scan for channels. You can
manually add a channel to the channel list if you
know the channel number.
1 Press MENU, press
Installation, then press ENTER.
2 Highlight Channel Tuning, then press ENTER.
3 Highlight Manual Tuning, then press ENTER.
4 Use the number buttons on the remote control to
enter the channel number, then press ENTER.
5 Press ENTER to start manual tuning.
6 Press EXIT to close the menu.
or
to highlight
www.tv.toshiba.com
32" 720p / 49" 1080p / 55" 1080p 60Hz LED TV
Hiding channels
You can hide channels in the channel list. When you
press CH
or CH , your TV skips the hidden
channels.
You can still tune to a hidden channel by pressing the
number buttons for the channel. If you tune to a
hidden channel, the channel appears in the History
list.
1 Press MENU, press
then press ENTER.
2 Highlight Channel Options, then press ENTER.
3 Highlight a channel you want to hide, then press
ENTER. A check appears in the box next to the
channel.
Notes
• Channels labeled ATV are analog
channels. Channels labeled DTV are
digital channels.
• To un-hide a channel, highlight the
channel, then press ENTER to remove
the check.
• You can also lock specific channels so
that they cannot be tuned until you
unlock them. See
page 62.
4 Press EXIT to close the menu.
to highlight Options,
or
Locking channels
on
57