Freezing The Picture; Adjusting The Sound; Adjusting Sound Settings - Toshiba 55L510U18 Manual

32L310U18 / 49L510U18 / 55L510U18 32" 720p / 49" 1080p / 55" 1080p 60Hz LED TV
3 Highlight 4:3 Stretch, then press ENTER.
4 Highlight On, then press ENTER. (To turn off 4:3
Stretch, select Off.)
5 Press EXIT to close the menu.

Freezing the picture

You can freeze the picture while you are watching TV.
The audio continues to play while the picture is
frozen. When you unfreeze the picture, the video
resumes playing.
1 When watching the TV, press FREEZE.
2 To unfreeze the picture, press FREEZE or any other
button.
Notes
• If your TV is left in freeze mode for
more than 15 minutes, freeze mode
automatically turns off and your TV
returns to normal video.
• Using the freeze function for any
purpose other than your private
viewing may be prohibited under the
Copyright Laws of the United States
and other countries, and may subject
you to civil and criminal liability.

Adjusting the sound

This section covers:

• Adjusting sound settings

• Playing TV audio only
Adjusting sound settings
You can adjust sound settings to improve the sound
quality.
1 Press MENU, press
then press ENTER.
54
to highlight Sound,
or
www.tv.toshiba.com
2 Highlight an option, then press ENTER. You can
select:
• Sound Mode—Selects the sound mode. You
can select Standard, Music, Movie, Clear Voice,
or Enhanced Bass.
• Reset—Resets all sound settings to the factory
default.
• Balance—Adjusts the balance between the left
and right audio channels.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• Advanced Sound Settings—Adjusts advanced
sound settings. You can select:
• TruSurround—Delivers clear, crisp, natural
sound over front facing speaker
configurations, complete with rich bass, high
frequency detail, and clear dialog. You can
select On or Off.
• Dialog Clarity—Adjusts the dialog volume
when watching movies or TV programs. You
can select Off, Low, or High.
• TV Speakers—Turns your TV's speakers on or
off. You can select:
• Auto—Turns off the TV speakers when you
connect a device to the
• On—Keeps the TV speakers on when you
connect a device to the
• Off—Turns off the TV speakers.
Note
If the Voice Guide is turned on, the TV
Speakers option can only be set to Auto.
• MTS—(Analog channels received through the
ANT / CABLE IN jack only) Selects the audio
mode. You can select:
• Stereo—Select this option for programs
broadcast in stereo. You can typically leave
your TV in Stereo mode because Stereo
outputs the type of sound being broadcast
(stereo or mono).
• Mono—Select this option if there is noise or
static on weak stereo broadcasts.
• SAP—Select this option to listen to a
secondary audio program, if available. If you
select this option and no secondary audio
program is available, you may not hear
sound. Change the MTS option to Stereo.
• Digital Audio Selection—Lets you
conveniently switch between audio tracks on a
digital channel (when available). This option
temporarily overrides the Primary Audio
Language option on the Sound menu.
• Primary Audio Language—Selects the
language for digital channels.
/AUDIO OUT jack.
/AUDIO OUT jack.