Multiple Power Sources" Section - Cisco Aironet 1520 Series Hardware Installation Manual

Hardware Features
R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Table 1-2
Table 1-2
Part Number
AIR-ANT5180V-N
AIR-ANT58G10SSA-N
AIR-ANT5114P-N
AIR-ANT5117S-N
1. Operation in the 4.9-GHz band requires a license and may be used only by qualified Public Safety operators as defined in
Table 1-3
Part Number
AIR-ANT2450V-N
AIR-ANT2480V-N
Multiple Power Sources
The access point supports these power sources:
•
•
•
•
Connect the unit only to DC power source that complies with the safety extra-low voltage (SELV)
Warning
requirements in IEC 60950 based safety standards. Statement 1033
•
The access point can be connected to more than one power source. The access point detects the available
power sources and switches to the preferred power source using the following default prioritization:
•
•
•
•
Warning This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
1-8
and Table 1-3 list the supported external antennas for the access point.
External 5-GHz Antennas
section 90.20 of the FCC rules.
External 2.4-GHz Antennas
PoE—power injector (AIR-PWRINJ1500-2=)
AC power—100 to 480 VAC (standard power source for the pole mount configuration)
POC—40 to 90 VAC (quasi-square wave AC), (standard power source for the cable configuration)
External 12 VDC
Internal battery
AC power or POC power
External 12-VDC power
Power injector PoE power
Internal battery power
1
Model
5-GHz compact omnidirectional
5-GHz sector
5-GHz patch
5-GHz 90-degree sector
Model
2.4-GHz compact omnidirectiona
2.4 GHz omnidirectional
Chapter 1 Overview
Gain (dBi)
8
9.5
14
17
Gain (dBi)
5.5
8
OL-12632-03