Hardware Features
Power Sources
The 1540 series access points can be powered only through Power over Ethernet (PoE). The 1540 series
access points support the following power injectors:
•
•
•
•
•
•
Ethernet (PoE) Port
The access point has a PoE-In port. The port uses an RJ45 connector (with weatherproofing) to link the access
point to the inline power from the power injector or a suitably powered switch port.
The Ethernet cable must be a shielded outdoor rated Category 5e (CAT5e), or better, cable.
Cisco Aironet 1540 Series Outdoor Access Point Hardware Installation Guide
1-6
802.3af Power Injector AIR-PWRINJ5=
802.3at Power Injector AIR-PWRINJ6=
AIR-PWRINJ-60RGD1=
AIR-PWRINJ-60RGD2=
PoE supply rated at 48-55V DC, minimum 350 mA
Cisco UPoE
Chapter 1
Overview