Cisco Aironet 1520 Series Hardware Installation Manual page 47

Outdoor mesh access point
Hide thumbs Also See for Aironet 1520 Series:
Table of Contents

Advertisement

Chapter 2
Mounting Instructions
R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Refer to these sections for installation details.
Access Point Mounting Orientation
When installing an access point on a horizontal or vertical surface, you must ensure that the access point
is oriented with the LED indicators pointing down (see
positioning allows the LEDs to be visible to someone on the ground below the access point.
You must also ensure the access point is mounted with the hinged access cover facing out.
Omnidirectional antennas are vertically polarized and should be mounted vertically.
Note
Mounting the Access Point on a Wall
The optional pole mount kit contain a mounting bracket for wall mounting. You can use the mounting
bracket as a template to mark the positions of the mounting holes for your installation. You then install
the mounting plate, and attach the access point when you are ready.
will need to provide in addition to the pole mount kit.
Table 2-2
Materials Required
Ground lug and screws (provided with access point)
Crimping tool for ground lug, Panduit CT-720 with
CD-720-1 die (http://onlinecatalog.panduit.com)
Four M8 or 5/16 in. (31 mm) screws
Four wall anchors (specified for wall material)
Drill bit for wall anchors
Electric drill and standard screwdriver
#6-AWG ground wire
Shielded outdoor-rated Ethernet (CAT5e or better) cable
Grounding block
Grounding rod
13-mm box-end wrench or socket set
The mounting surface, attaching screws, and optional wall anchors must be able to support a 50 lb
Caution
(22.7 kg) static weight.
OL-12632-03
Access Point Mounting Orientation, page 2-17
Mounting the Access Point on a Wall, page 2-17
Mounting the Access Point on a Pole, page 2-21
Cable Strand Mounting, page 2-30
Material Needed to Mount Access Point to a Vertical Wall
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
Mounting the Access Point
Figure
2-2,
Figure
2-3, and
Table 2-2
lists the material that you
In Kit
Yes
No
No
No
No
No
No
No
No
No
No
Figure
2-4). This
2-17

Advertisement

Table of Contents
loading

Table of Contents