Pc Card Assembly - HP 500 Maintenance And Service Manual

PC Card assembly

Description
PC Card assembly
PC Card slot bezel
Before removing the PC Card assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory/Mini PCI card module compartment cover (see
c. Optical drive (see
d. Switch cover (see
e. Keyboard (see
f. Display assembly (see
g. Base enclosure (see
h. Fan assembly (see
i. Heat sink (see
j. System board (see
Remove the PC Card assembly:
1. Position the system board with the PC Card eject button toward you.
58 Chapter 5 Removal and replacement procedures
Battery on page 28).
Hard drive on page 29)
Optical drive on page
Switch cover on page
Keyboard on page 39)
Display assembly on page
Base enclosure on page
Fan assembly on page
Heat sink on page 50)
System board on page
Spare part number
438551-001
438527-001
Memory module on page
35)
37)
41)
46)
49)
56)
31)
ENWW