13.
Speaker assembly (see
14.
System board (see
Remove the USB/audio board:
1.
Remove the USB/audio board cables (1) from the clips (2) built into the base enclosure.
2.
Remove the Torx T8M2.5×4.0 screw (3) that secures the USB/audio board to the base enclosure.
3.
Lift the left side of the USB/audio board (4) until the USB and audio connectors disengage from
the openings in the base enclosure.
4.
Remove the USB/audio board and cables from the base enclosure.
Reverse this procedure to install the USB/audio board.
PC Card assembly
Description
PC Card assembly
Before removing the PC Card assembly, follow these steps:
1.
Battery (see
2.
Hard drive (see
3.
Bluetooth module (see
4.
Optical drive (see
5.
Keyboard (see
6.
TouchPad (see
7.
Switch cover (see
8.
Fan/heat sink assembly (see
92
Chapter 4 Removal and replacement procedures
Speaker assembly on page
System board on page
Battery on page
44)
Hard drive on page
Bluetooth module on page
Optical drive on page
Keyboard on page
60)
TouchPad on page
Switch cover on page
Fan/heat sink assembly on page
85)
87)
48)
51)
58)
64)
67)
Spare part number
450584-001
70)