Computer Setup Defaults - HP 500 Maintenance And Service Manual
Notebook pc
Hide thumbs
Also See for 500:
- Service manual (112 pages) ,
- Getting started manual (54 pages) ,
- Troubleshooting manual (18 pages)
Table of Contents
Advertisement
Your preferences go into effect when the computer restarts.
Computer Setup defaults
To return all settings in Computer Setup to the values that were set at the factory:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
In Computer Setup, the following shortcuts are available:
●
To change the language, press f2.
●
To view navigation information, press f1.
●
To close open dialog boxes and return to the main Computer Setup screen, press esc.
2.
Use the arrow keys to select File > Restore defaults, and then press enter.
3.
When the confirmation dialog box opens, press f10.
4.
Select the Restore defaults check box, and then press enter.
5.
To confirm the restoration, press f10.
6.
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
NOTE
default settings.
ENWW
Your password and security settings are not changed when you restore the factory
f10
while the
Computer Setup defaults
63
Advertisement
Table of Contents
