Processor - HP 500 Maintenance And Service Manual

Processor

NOTE
Description
Intel Pentium M 740 1.73-GHz processor
Intel Celeron M 360 1.40-GHz processor
Intel Celeron M 350 1.30-GHz processor
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory/Mini PCI card module compartment cover (see
c. Optical drive (see
d. Switch cover (see
e. Keyboard (see
f. Display assembly (see
g. Base enclosure (see
h. Fan assembly (see
i. Heat sink (see
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
until you hear a click.
ENWW
All processor spare part kits include thermal paste.
Battery on page
Hard drive on page
Optical drive on page
Switch cover on page
Keyboard on page
Display assembly on page
Base enclosure on page
Fan assembly on page
Heat sink on page
28).
29)
Memory module on page
35)
37)
39)
41)
46)
49)
50)
Component replacement procedures
Spare part number
438555-001
438554-001
438553-001
31)
53