Solid-State Drive - HP ProBook 445 G9 Maintenance And Service Manual

Solid-state drive

To remove the M.2 solid-state drive, use this procedure and illustration. Both M.2 2280 and M2.2230 drives
are available.
Table 5-5 Solid-state drive descriptions and part numbers
Description
Primary solid-state drives (M.2 2280)
1 TB, PCIe, TLC, 2280
512 GB, PCIe, value, 2280
256 GB, PCIe, value, 2280
Secondary solid-state drives (M.2 2230)
256 GB, PCIe, value, 2230
128 GB, PCIe, value, 2230
Solid-state drive support kit
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
46 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Preparation for disassembly on page
Bottom cover on page 38).
38).
Battery on page 48).
Spare part number
M16560-001
L85364-001
L85354-001
M11042-001
M11040-001
N00354-001