Table of Contents
Advertisement
4.
Remove the WWAN module (3) by pulling the module away from the slot at an angle.
NOTE:
When you look at the antenna terminals from the top of the module, the white WWAN antenna
cable connects to the terminal to the left of the black WWAN antenna cables.
5.
If the WWAN antenna is not connected to the terminal on the WWAN module, a protective sleeve must be
installed on the antenna connector, as shown in the following illustration.
Reverse this procedure to install the WWAN module.
Component replacement procedures
45
- Quick Links:
- Components
- Illustrated Parts Catalog
- Bottom Cover
Hide quick links:
Advertisement
Table of Contents
