Table of Contents
Advertisement
c.
Lift the tape from the connector on the display panel (1), and then disconnect the cable from the
panel (2).
9.
When replacing the display panel, follow these steps:
IMPORTANT:
Before installing the display panel, be sure to install the display cable to the back of the
panel.
a.
Peel the protective layer from the bottom of the adhesive strips (1).
b.
Starting near the bottom of the inside of the display back cover (2), install the adhesive strips on
both the left and right sides by aligning them with the groove on the edge of cover (3).
c.
Peel the protective layer from the top of the adhesive strips (4).
Component replacement procedures
63
- Quick Links:
- Components
- Illustrated Parts Catalog
- Bottom Cover
Hide quick links:
Advertisement
Table of Contents
