Troubleshooting - Zte MF93D Getting Started

Troubleshooting

Problem
Can not estab- • You need to install the software.
lish the USB Run the installation program in path
connection of My Computer > ZTEMODEM.
between your • If the driver of your device is abnor-
device and PC mal, please reinstall the software.
• Make sure the Wi-Fi function is ac-
tive. Press the WPS button to en-
able or disable Wi-Fi function.
Can not estab- • Refresh network list and select the
lish the Wi-Fi correct SSID.
connection • Check the IP address to make sure
between your your client can obtain an IP address
device and cli- automatically in the Internet protocol
ent (TCP/IP) properties.
• Type the correct network key (Wi-Fi
password) when you connect to the
device.
Suggested Solution
74
Problem
• Make sure your (U)SIM card is
available.
The client con-
• Change the location to find a place
nected
with good signal.
to the device
• Check WAN Connection mode set-
can not access
ting.
the Internet
• Contact with your service provider
and confirm your APN settings.
When I use In- • Make sure the other WLAN device
ternet has already connected to the Inter-
Wi-Fi mode, the net.
client cannot • Make sure that the subnet of your
access the Inter- device and the other WLAN device
net. is different
• Enter the correct address. The de-
Can not visit the fault address is http://192.168.0.1 or
webGUI con- http://m.home.
figuration • Only use one network adapter in
page your PC.
• Do not use any proxy server.
Suggested Solution
75