NOTE: If the Windows operating system does not launch in-
stallation automatically, you can run the installation program
in path of My Computer > ZTEMODEM.
4.
Wait a moment, and then the client will connect to your
device successfully.
Accessing the Internet
4G Mode
After the client connected to your device successfully, you
can access the Internet in the Automatic or Manual mode.
The default mode is Automatic.
Mode
Your device will connect to the Internet
Automatic
automatically, and your clients can surf on
the Internet directly.
Login the webGUI configuration page,
and select Settings > Network Settings >
Manual
Dial-up Settings > Manual, and then click
Home > Connect / Disconnect.
Operations
62
NOTE:
If you want to modify the detailed parameters of your de-
vice, please login the webGUI configuration page by visiting
http://192.168.0.1 or http://m.home. The default password is
admin.
Internet Wi-Fi Mode
1.
Login the webGUI configuration page.
2.
Select Settings > Internet Wi-Fi.
3.
Set the Internet Wi-Fi Switch and Preferred Network,
and then click Apply.
NOTE:
You need to Enable the Internet Wi-Fi Switch and select Wi-
Fi.
63