Chevrolet 2010 Corvette Convertible Owner's Manual page 369

If the low-beam headlamp needs to be replaced, see
your dealer/retailer. See
To replace a high-beam or front parking/turn signal/
DRL bulb:
1. Turn the wheel to allow access to the wheel well.
2. Remove the three outer fasteners to move the
access panel back.
for more information.
3. Remove the outer cover to expose the high-beam
headlamp bulb socket.
5. Remove the front parking/turn signal bulb by
turning the bulb socket counterclockwise.
6. Replace the high-beam headlamp bulb with a new
bulb and reattach to the bulb socket.
Replace the front parking/turn signal bulb by
turning the bulb socket clockwise.
7. Reverse the Steps 2 through 4 to reinstall.
4. Remove the headlamp
bulb by releasing the
outer tabs from the
socket.
6-57