License Plate Lamp; Replacement Bulbs - Chevrolet 2008 Cobalt Owner's Manual

Chevrolet 2008 cobalt automobile owner's manual

Hide thumbs Also See for 2008 Cobalt:

Table of Contents

License Plate Lamp

To replace one of these bulbs:

1. Remove the two screws holding each of the license

plate lamps.

2. Turn and pull the license plate lamp toward you

through the opening.

3. Turn the bulb socket counterclockwise and pull the

bulb straight out of the socket.

4. Install the new bulb.

5. Reverse Steps 1 through 3 to reinstall the license

Exterior Lamps

Back-Up Lamps

Center High-Mounted

Stoplamp (CHMSL)

Front Parking/Turn

Signal Lamps

Halogen Headlamps,

High/Low-Beam

License Plate Lamp and

Stoplamp, Taillamp and

Turn Signal Lamps

For replacement bulbs not listed here, contact your

dealer/retailer.

Show Quick Links

Table of Contents