Page 1 2008 Chevrolet Avalanche Owner Manual Seats and Restraint Systems ......1-1 Driving Your Vehicle ........4-1 Front Seats Your Driving, the Road, and Your Vehicle ..........1-2 ..4-2 Rear Seats Towing ..........1-12 ........... 4-42 Safety Belts Service and Appearance Care ......5-1 ..........
Page 2: Canadian Owners
For vehicles ﬁrst sold in P.O. Box 07130 Canada, substitute the name “General Motors of Canada Detroit, MI 48207 Limited” for Chevrolet Motor Division wherever it appears 1-800-551-4123 in this manual. www.helminc.com This manual describes features that may or may not be on your speciﬁc vehicle.
Page 3 Index A circle with a slash through it is a safety symbol which means “Do To quickly locate information about the vehicle use the Not,” “Do Not do this” Index in the back of the manual. It is an alphabetical or “Do Not let this happen.”...
Page 4: Vehicle Symbols
Vehicle Damage Warnings Vehicle Symbols Notices are also used in this manual. The vehicle has components and labels that use symbols instead of text. Symbols are shown along with Notice: These mean there is something that could the text describing the operation or information damage your vehicle.
Page 5: Table Of Contents
Section 1 Seats and Restraint Systems Front Seats ............1-2 Where to Put the Restraint ......1-44 Manual Seats ..........1-2 Lower Anchors and Tethers Power Seats ..........1-3 for Children (LATCH) .........1-46 Manual Lumbar ..........1-4 Securing a Child Restraint in a Power Lumbar ..........1-4 Rear Seat Position ........1-53 Heated Seats ..........1-5 Securing a Child Restraint in the...
Page 6: Front Seats
Front Seats To move a manual seat forward or rearward: 1. Lift the bar to unlock the seat. Manual Seats 2. Slide the seat to the desired position and release the bar. CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving.
Page 7: Power Seats
Power Seats Move the seat forward or rearward by sliding the control forward or rearward. Your vehicle may have additional features to adjust your vehicle’s power seat: • Raise or lower the front part of the seat cushion by moving the front of the control up or down. •...
Page 8: Manual Lumbar
Manual Lumbar Power Lumbar On vehicles with this feature the control is located on the outboard side of the seat. Increase or decrease lumbar support by turning the knob forward or rearward. If the seats have power lumbar, the controls used to operate this feature are located on the outboard side of the seats.
Page 9: Heated Seats
Heated Seats The vehicle may have additional features to adjust the power lumbar: On vehicles with heated front seats, the controls are • To raise the height of the lumbar support, press located on the driver’s and passenger’s doors. and hold the top of the control. •...
Page 10 Memory Seat, Mirrors, and Pedals To save your positions in memory, do the following: 1. Adjust the driver’s seat, including the seatback Your vehicle may have the memory package. recliner and lumbar, both outside mirrors, and the throttle and brake pedals to a comfortable The controls for this position.
Page 11 Easy Exit Seat If you use the remote keyless entry transmitter to enter your vehicle and the remote recall memory feature The control for this feature is located on the driver’s is on, automatic seat, adjustable mirror, and adjustable door panel between buttons 1 and 2. pedal movements will occur.
Page 12: Reclining Seatbacks
Reclining Seatbacks CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving.
Page 13: Manual Reclining Seatbacks
Manual Reclining Seatbacks CAUTION: On seats with manual reclining seatbacks, the lever used to operate them is located on the outboard side of the seat(s). Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this.
Page 14: Power Reclining Seatbacks
Power Reclining Seatbacks To return the seatback to an upright position, do the following: 1. Lift the lever fully without applying pressure to the seatback and the seatback will return to the upright position. 2. Push and pull on the seatback to make sure it is locked.
Page 15: Head Restraints
Head Restraints Pull the head restraint up to raise it. To lower the head restraint, press the release button, located on the top of the seatback, while you push the head restraint down. Head Restraint with Tilt Feature shown Center Seat Your vehicle may have a front center seat.
Page 16: Rear Seats
Rear Seats Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts Rear Seat Operation and return them to their normal stowed position before folding a rear seat. The rear seat is a 60/40 split bench seat that can be folded to give you more cargo space and access to the ®...
Page 17 CAUTION: CAUTION: A safety belt that is improperly routed, not If the seatback is not locked, it could move properly attached, or twisted will not provide forward in a sudden stop or crash. That could the protection needed in a crash. The person cause injury to the person sitting there.
Page 18: Safety Belts
Safety Belts CAUTION: Safety Belts: They Are for Everyone People riding on the tailgate (if equipped) can This part of the manual tells you how to use safety easily lose their balance and fall even when belts properly. It also tells you some things you should the vehicle is operated at low speeds.
Page 19: Why Safety Belts Work
Why Safety Belts Work In most states and in all Canadian provinces, the law requires wearing safety belts. Here is why: When you ride in or on anything, you go as fast You never know if you will be in a crash. If you do have as it goes.
Page 20 Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop. 1-16...
Page 21 The person keeps going until stopped by something. or the instrument panel... In a real vehicle, it could be the windshield... 1-17...
Page 22: Questions And Answers About Safety Belts
Questions and Answers About Safety Belts Will I be trapped in the vehicle after a crash if I am wearing a safety belt? You could be — whether you are wearing a safety belt or not. But your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted.
Page 23: How To Wear Safety Belts Properly
How to Wear Safety Belts Properly If I am a good driver, and I never drive far from home, why should I wear safety belts? This section is only for people of adult size. You may be an excellent driver, but if you are in a Be aware that there are special things to know about crash —...
Page 24 In a crash, this applies force to the strong pelvic bones and you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force on your abdomen. This could cause serious or even fatal injuries.
Page 25 What is wrong with this? CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should ﬁt snugly against your body. The shoulder belt is too loose.
Page 26 What is wrong with this? CAUTION: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs.
Page 27 What is wrong with this? CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones.
Page 28 What is wrong with this? CAUTION: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries.
Page 29 What is wrong with this? CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones.
Page 30 What is wrong with this? CAUTION: You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap belt.
Page 31 What is wrong with this? CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to ﬁx it.
Page 32 Lap-Shoulder Belt All seating positions in your vehicle have a lap-shoulder belt except for the center front passenger position (if equipped), which has a lap belt. See Lap Belt on page 1-34 for more information. Here is how to wear a lap-shoulder belt properly. 1.
Page 33 4. If equipped with a shoulder belt height adjuster, move it to the height that is right for you. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See “Shoulder Belt Height Adjustment” later in this section.
Page 34 Shoulder Belt Height Adjuster Safety Belt Pretensioners Your vehicle has a shoulder belt height adjuster for the Your vehicle has safety belt pretensioners for front driver and right front passenger position. outboard occupants. Although you cannot see them, they are part of the safety belt assembly. They can help Adjust the height so that the shoulder portion of the belt tighten the safety belts during the early stages of a is centered on your shoulder.
Page 35: Rear Safety Belt Comfort Guides
Rear Safety Belt Comfort Guides Rear shoulder belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide positions the belt away from the neck and head.
Page 36 CAUTION: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
Page 37: Safety Belt Use During Pregnancy
Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. 4. Buckle, position, and release the safety belt as described previously in this section.
Page 38: Lap Belt
Lap Belt This part is only for the lap belt. To learn how to wear a lap-shoulder belt, see Lap-Shoulder Belt on page 1-28. You vehicle may have a center seating position. When you sit in the center front seating position, you have a lap safety belt, which has no retractor.
Page 39 Safety Belt Extender Child Restraints If the safety belt will fasten around you, you should Older Children use it. But if a safety belt is not long enough, your dealer/retailer will order you an extender. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you.
Page 40 The manufacturer’s instructions that come with the What is the proper way to wear safety belts? booster seat, state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder An older child should wear a lap-shoulder belt and belt until the child passes the below ﬁt test: get the additional restraint a shoulder belt can provide.
Page 41 CAUTION: Never do this. Here two children are wearing the same belt. The belt cannot properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time. 1-37...
Page 42: Infants And Young Children
CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. In a crash, the child would not be restrained by the shoulder belt. The child might slide under the lap belt. The belt force would then be applied right on the abdomen.
Page 43 CAUTION: CAUTION: People should never hold an infant in their arms Children can be seriously injured or strangled if while riding in a vehicle. An infant does not a shoulder belt is wrapped around their neck weigh much — until a crash. During a crash an and the safety belt continues to tighten.
Page 44: Child Restraints
What are the different types of add-on CAUTION: child restraints? Add-on child restraints, which are purchased by the Children who are up against, or very close to, vehicle’s owner, are available in four basic types. any airbag when it inﬂates can be seriously Selection of a particular restraint should take injured or killed.
Page 45 CAUTION: CAUTION: Newborn infants need complete support, The body structure of a young child is quite including support for the head and neck. This unlike that of an adult or older child, for whom is necessary because a newborn infant’s neck the safety belts are designed.
Page 46: Child Restraint Systems
Child Restraint Systems A rear-facing infant seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. A booster seat (C-D) is a child restraint designed to improve the ﬁt of the vehicle’s safety belt system.
Page 47 Securing an Add-On Child Restraint in When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the Vehicle the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy CAUTION: from the manufacturer.
Page 48: Securing The Child Within The Child Restraint
Securing the Child Within the Child Where to Put the Restraint Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. We recommend that children and child restraints CAUTION: be secured in a rear seat, including: an infant or a child riding in a rear-facing child restraint;...
Page 49 CAUTION: CAUTION: A child in a rear-facing child restraint can be A child in a child restraint in the center front seriously injured or killed if the right front seat can be badly injured or killed by the passenger’s airbag inﬂates. This is because frontal airbags if they inﬂate.
Page 50: Lower Anchors And Tethers For Children (Latch)
Lower Anchors and Tethers for Lower Anchors Children (LATCH) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
Page 51: Top Tether Anchor
Top Tether Anchor Some child restraints that have top tethers are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached.
Page 52 Lower Anchor and Top Tether Anchor To assist you in locating the top tether anchors, the Locations top tether anchor symbol is located near the top (Top Tether Anchor): tether anchors. Seating positions with top tether anchors. (Lower Anchor): Seating positions with two lower anchors.
Page 53 Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached.
Page 54: Securing A Child Restraint Designed For The Latch System
Securing a Child Restraint Designed for the LATCH System CAUTION: Each top tether anchor and lower anchor in the CAUTION: vehicle is designed to hold only one child restraint. Attaching more than one child If a LATCH-type child restraint is not attached restraint to a single anchor could cause the to anchors, the restraint will not be able to anchor or attachment to come loose or even...
Page 55 1. If the child restraint manufacturer recommends that the top tether be attached, attach the top tether to CAUTION: the top tether anchor, if there is one. Refer to the child restraint instructions and the following steps: Children can be seriously injured or strangled 1.1.
Page 56 If the position you are If the position you are using does not have a using has an adjustable headrest or head restraint headrest or head restraint and you are using a and you are using a dual tether, route the tether single tether, raise the over the seatback.
Page 57: Securing A Child Restraint In A Rear Seat Position
2. Attach the lower attachments to the lower anchors. If your child restraint has the LATCH system, see Lower If the child restraint does not have lower Anchors and Tethers for Children (LATCH) on attachments or the desired seating position does page 1-46 for how and where to install your child not have lower anchors, secure the child restraint restraint using LATCH.
Page 58 If you need to install more than one child restraint in the rear seat, be sure to read Where to Put the Restraint on page 1-44. 1. If your child restraint manufacturer recommends using a top tether, attach and tighten the top tether to the top tether anchor.
Page 59 5. Pull the rest of the shoulder belt all the way out of 6. To tighten the belt, push down on the child restraint, the retractor to set the lock. pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor.
Page 60: Securing A Child Restraint In The Center Front Seat Position
Securing a Child Restraint in the Securing a Child Restraint in the Center Front Seat Position Right Front Seat Position Your vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where to CAUTION: Put the Restraint on page 1-44.
Page 61 If your child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) on CAUTION: page 1-46 for how to install your child restraint using LATCH. If you secure a child restraint using a safety belt and it uses a top tether, see Lower Anchors and A child in a rear-facing child restraint can be Tethers for Children (LATCH) on page 1-46 for top seriously injured or killed if the right front...
Page 62 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. 5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock.
Page 63 If a child restraint has been installed and the on indicator is lit, turn the vehicle off. Remove the child restraint from the vehicle and reinstall the child restraint. If, after reinstalling the child restraint and restarting the vehicle, the on indicator is still lit, check to make sure that the vehicle’s seatback is not pressing the child restraint into the seat cushion.
Page 64: Airbag System
Airbag System Here are the most important things to know about the airbag system: Your vehicle has the following airbags: • A frontal airbag for the driver. CAUTION: • A frontal airbag for the right front passenger. Your vehicle may have the following airbags: You can be severely injured or killed in a crash •...
Page 65 CAUTION: CAUTION: Frontal airbags are designed to deploy in Airbags inﬂate with great force, faster than the moderate to severe frontal and near frontal blink of an eye. Anyone who is up against, or crashes. They are not designed to inﬂate in very close to, any airbag when it inﬂates can rollover, rear crashes, or in many side crashes.
Page 66 There is an airbag readiness light on the CAUTION: instrument panel cluster, which shows the airbag symbol. Airbags plus lap-shoulder belts offer the best protection for adults, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is The system checks the airbag electrical system for designed for them.
Page 67: Where Are The Airbags
Where Are the Airbags? The right front passenger’s airbag is in the instrument panel on the passenger’s side. The driver’s airbag is in the middle of the steering wheel. 1-63...
Page 68 CAUTION: If something is between an occupant and an airbag, the airbag might not inﬂate properly or it might force the object into that person causing severe injury or even death. The path of an inﬂating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other...
Page 69: When Should An Airbag Inﬂate
When Should an Airbag Inﬂate? Frontal airbags may inﬂate at different crash speeds. For example: Frontal airbags are designed to inﬂate in moderate to • If the vehicle hits a stationary object, the airbags severe frontal or near-frontal crashes to help reduce the could inﬂate at a different crash speed than if the potential for severe injuries mainly to the driver’s or vehicle hits a moving object.
Page 70 In addition, your vehicle has dual-stage frontal airbags. Roof-rail airbags are not intended to inﬂate in rear Dual-stage airbags adjust the restraint according to impacts. Both roof-rail airbags will deploy when either crash severity. Your vehicle has electronic frontal side of the vehicle is struck or if the sensing system sensors, which help the sensing system distinguish predicts that the vehicle is about to roll over, or in between a moderate frontal impact and a more severe...
Page 71: What Makes An Airbag Inﬂate
What Makes an Airbag Inﬂate? Airbags supplement the protection provided by safety belts. Frontal airbags distribute the force of the impact more evenly over the occupant’s upper body, In a deployment event, the sensing system sends an stopping the occupant more gradually. Roof-rail airbags electrical signal triggering a release of gas from distribute the force of the impact more evenly over the inﬂator.
Page 72: What Will You See After An Airbag Inﬂates
What Will You See After an Airbag CAUTION: Inﬂates? After the frontal airbags inﬂate, they quickly deﬂate, When an airbag inﬂates, there may be dust in so quickly that some people may not even realize the air. This dust could cause breathing an airbag inﬂated.
Page 73: Passenger Sensing System
Passenger Sensing System In many crashes severe enough to inﬂate the airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the Your vehicle has a passenger sensing system for the right front passenger airbag. right front passenger’s position. The passenger airbag status indicator will be visible on the overhead •...
Page 74 The passenger sensing system will turn off the right front passenger’s frontal airbag under certain conditions. CAUTION: The driver’s airbags are not part of the passenger sensing system. A child in a rear-facing child restraint can be The passenger sensing system works with sensors that seriously injured or killed if the right front are part of the right front passenger’s seat and safety belt.
Page 75 The passenger sensing system is designed to turn off If, after reinstalling the child restraint and restarting the the right front passenger’s frontal airbag if: vehicle, the on indicator is still lit, check to make sure that the vehicle’s seatback is not pressing the child •...
Page 76 For some children who have outgrown child restraints and for very small adults, the passenger sensing system may or may not turn off the right front passenger’s frontal airbag, depending upon the person’s seating posture and body build. Everyone in your vehicle who has outgrown child restraints should wear a safety belt properly —...
Page 77 If you ever pull the shoulder portion of the belt out all We recommend that you not use seat covers or other the way, you will engage the child restraint locking aftermarket equipment other than any that GM has feature. This may unintentionally cause the passenger approved for your speciﬁc vehicle.
Page 78: Servicing Your Airbag-Equipped Vehicle
Servicing Your Airbag-Equipped Adding Equipment to Your Vehicle Airbag-Equipped Vehicle Airbags affect how your vehicle should be serviced. There are parts of the airbag system in several places Is there anything I might add to or change around your vehicle. Your dealer/retailer and the service about the vehicle that could keep the airbags manual have information about servicing your vehicle from working properly?
Page 79 or with GM covers, upholstery or trim designed for a Because I have a disability, I have to get my different vehicle. Any object, such as an aftermarket vehicle modiﬁed. How can I ﬁnd out whether seat heater or a comfort enhancing pad or device, this will affect my airbag system? installed under or on top of the seat fabric, could also If you have questions, call Customer Assistance.
Page 80: Restraint System Check
Restraint System Check Airbags The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag Checking the Restraint Systems readiness light is working. See Airbag Readiness Light on page 3-35 for more information. Safety Belts Notice: If an airbag covering is damaged, opened, Now and then, make sure the safety belt reminder light or broken, the airbag may not work properly.
Page 81: Replacing Restraint System Parts
Replacing Restraint System Parts If your vehicle has the LATCH system and it was being used during a crash, you may need new LATCH After a Crash system parts. New parts and repairs may be necessary even if the belt or LATCH system (if equipped), was not being used CAUTION: at the time of the crash.
Page 82 NOTES 1-78...
Page 83: Features And Controls
Section 2 Features and Controls Keys ...............2-3 Starting and Operating Your Vehicle ....2-30 Remote Keyless Entry (RKE) System ....2-4 New Vehicle Break-In ........2-30 Remote Keyless Entry (RKE) System Ignition Positions ..........2-30 Operation ...........2-5 Retained Accessory Power (RAP) ....2-32 Remote Vehicle Start ........2-7 Starting the Engine ........2-32 Adjustable Throttle and Brake Pedal ....2-33 Doors and Locks ..........2-10...
Page 84 Section 2 Features and Controls Object Detection Systems .......2-58 Center Overhead Console ......2-71 Ultrasonic Rear Parking Assist (URPA) .....2-58 Front Armrest Storage Area ......2-71 Center Console Storage .........2-71 ® OnStar System ..........2-61 Luggage Carrier ...........2-72 Universal Home Remote System ......2-64 Rear Storage Area ........2-73 Universal Home Remote System Operation Cargo Cover Panels ........2-73...
Page 85: Keys
Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and they could be seriously injured or killed if caught in the path of a closing...
Page 86: Remote Keyless Entry (Rke) System
Remote Keyless Entry (RKE) If there is a decrease in the RKE operating range, try this: System • Check the distance. The transmitter may be too far from the vehicle. Stand closer during rainy or snowy The Remote Keyless Entry (RKE) system operates on weather.
Page 87 Remote Keyless Entry (RKE) (Remote Vehicle Start): If your vehicle has this feature, press to start the engine from outside System Operation the vehicle using the RKE transmitter. See Remote Vehicle Start on page 2-7 for additional information. The Remote Keyless Entry (RKE) transmitter functions will work up to 195 feet (60 m) away, however, the (Lock): Press to lock all the doors, including operating range may be less while the vehicle is running.
Page 88 " " Matching Transmitter(s) to Your (Unlock): Press to unlock the driver’s door. If pressed again within three seconds, all remaining doors, Vehicle including the tailgate, will unlock. Each RKE transmitter is coded to prevent another If it is dark enough outside, your interior lamps will transmitter from unlocking your vehicle.
Page 89: Remote Vehicle Start
Remote Vehicle Start Your vehicle may have a remote starting feature. This feature allows you to start the engine from outside of the vehicle. It may also start up the vehicle’s heating or air conditioning systems and rear window defogger. Normal operation of the system will return after the key is turned to the ON/RUN position.
Page 90 Laws in some communities may restrict the use of (Remote Start): This button will be on the RKE remote starters. For example, some laws may require transmitter if you have remote start. a person using the remote start to have the vehicle To start the vehicle using the remote start feature: in view when doing so.
Page 91: Remote Start Ready
To manually shut off a remote start, do any of the The vehicle cannot be remote started if the key is in the following: ignition, the hood is not closed, or if there is an emission control system malfunction and the check engine light •...
Page 92: Doors And Locks
Doors and Locks There are several ways to lock and unlock the doors. To lock or unlock the door from the outside, use the remote keyless entry (RKE) transmitter or the key. Door Locks To lock or unlock the door from the inside, slide the manual lever up or down, or use the power door locks switch.
Page 93: Programmable Automatic Door Locks
Rear Door Security Locks You can turn the delayed locking feature off or back on again by doing the following: Your vehicle has rear door security locks. These 1. Press and hold the power door lock switch in the prevent passengers from opening the rear doors from lock position.
Page 94: Lockout Protection
® Midgate When you want to open a rear door when the security lock is on, do the following: 1. Unlock the door by lifting the rear door manual lock, using the power door lock switch, or the Remote CAUTION: Keyless Entry (RKE) transmitter, if the vehicle has one.
Page 95 ® Midgate Operation ® D. Glass Lock F. Midgate Release Knobs Handle ® Your vehicle is equipped with a Midgate and a E. Window Retaining G. Window Alignment ® removable rear glass panel. The Midgate allows Tabs Arrows you to extend the length of your vehicle’s cargo area. Rear Glass Removal and Storage ®...
Page 96 To remove the rear glass do the following: 1. Fold the rear seats. See Rear Seat Operation on page 1-12 for more information. The front seats may have to be moved forward slightly to allow the rear seats to fold completely. Although the rear glass can be removed without folding the rear seats, you will not be able to access the rear glass storage pocket.
Page 97 4. With the rear glass tilted toward you, lift it out from the lower window frame channel. Use the grab handles to assist you in removing the rear glass. 5. Load the rear glass into the storage pocket in the ®...
Page 98 Once both glass lock knobs are in the locked 6. Turn both glass lock knobs (D), located at both position, the rear glass is securely stored. top corners of the storage pocket, to the locked position. Push in on the corner of the rear glass to 7.
Page 99 Reinstalling the Rear Glass To reinstall the rear glass, do the following: 1. Squeeze and pull down the latch levers (A), located near the upper corners of the rear glass, to unlatch. 4. With the rear glass tilted at an angle, place the bottom edge in the lower channel of the window frame.
Page 100 Be sure to align the rear glass side-to-side using the alignment arrows (G). 5. Apply a ﬁrm downward pressure and then push the rear glass ﬂat against the window frame. Use the 6. Push the rear glass ﬂat against the window frame grab handles at the top of the rear glass to and push each latch lever up until it locks.
Page 101 ® Lowering the Midgate with the Rear Glass in Place ® The Midgate can be lowered to allow the cargo area of your vehicle to extend into the cab. The rear glass can be either installed in its normal position, or it can be removed and stored in the rear glass storage pocket.
Page 102 ® Lowering the Midgate with the Rear Glass in the Storage Pocket ® 3. Lower the Midgate until it is ﬂat. Rear Glass Stored in Glass Storage Pocket 2-20...
Page 103 This is completely normal; however, since the crossbar ® lowers with the Midgate , it will be heavier. As you lower ® the Midgate be ready for the extra weight and do not let ® the Midgate fall as you lower it. ®...
Page 104: Tailgate
Tailgate Tailgate Removal The tailgate is not to be removed. This may cause damage to electrical connector resulting in loss CAUTION: of lock/unlock and rear vision camera function. Power Running Boards It is extremely dangerous to ride on the tailgate, even when the vehicle is operated at Your vehicle may have power running boards.
Page 105: Windows
Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 106: Power Windows
Power Windows The power window controls are located on each of the side doors. CAUTION: Leaving children in a vehicle with the keys is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move.
Page 107: Sun Visors
Express-Down Windows Sun Visors Windows with an express-down feature allow the Sun Visors with Slide Rod windows to be lowered without holding the switch. Press down fully on the window switch, then release, Your vehicle may have this feature. Pull the sun visor to activate the express-down mode.
Page 108: Theft-Deterrent Systems
Theft-Deterrent Systems If the delayed locking feature is turned on, the theft-deterrent system will not start the arming process until the last door is closed and the delay Vehicle theft is big business, especially in some cities. timer has expired. See Delayed Locking on This vehicle has theft-deterrent features, however, page 2-10.
Page 109: Testing The Alarm
Testing the Alarm The theft-deterrent system will not activate if the doors are locked with the vehicle’s key or the manual door lock. To test the alarm: It activates only if you use the power door lock switch with the door open or the RKE transmitter. You should also 1.
Page 110: Pass-Key Iii+ Electronic Immobilizer
® ® PASS-Key III+ Electronic PASS-Key III+ Electronic Immobilizer Immobilizer Operation ® The PASS-Key III+ system operates on a radio Your vehicle has PASS-Key III+ (Personalized frequency subject to Federal Communications Automotive Security System) theft-deterrent system. ® Commission (FCC) Rules and with Industry Canada. PASS-Key III+ is a passive theft-deterrent system.
Page 111 If the engine still does not start, and the key appears to To program the new additional key: be undamaged, try another ignition key. At this time, 1. Verify that the new key has a stamped on it. you may also want to check the fuse, see Fuses and Circuit Breakers on page 5-108.
Page 112: Starting And Operating Your Vehicle
Starting and Operating Your Ignition Positions Vehicle Use the key to turn the ignition switch to four different positions. New Vehicle Break-In Notice: Your vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: •...
Page 113 Key In the Ignition B (ACC/ACCESSORY): This position lets things like the radio and the windshield wipers operate while Never leave your vehicle with the keys inside, as it is an the engine is off. easy target for joy riders or thieves. If you leave the key in Lengthy operation of features such as the radio in the the ignition and park your vehicle, a chime will sound, ACC/ACCESSORY ignition position and the ON/RUN...
Page 114: Retained Accessory Power (Rap)
Retained Accessory Power (RAP) Starting Procedure 1. With your foot off the accelerator pedal, turn the The following vehicle accessories can be used for up to ignition key to START. When the engine starts, 10 minutes after the engine is turned off: let go of the key.
Page 115: Adjustable Throttle And Brake Pedal
Adjustable Throttle and Brake Pedal 2. If the engine does not start after 5-10 seconds, especially in very cold weather (below 0°F or −18°C), it could be ﬂooded with too much gasoline. Try On vehicles with this feature, you can change the pushing the accelerator pedal all the way to the ﬂoor position of the throttle and brake pedals.
Page 116: Engine Coolant Heater
To Use the Engine Coolant Heater Before you start driving, fully press the brake pedal to conﬁrm the adjustment is right for you. While driving, 1. Turn off the engine. make only small adjustments. 2. Open the hood and unwrap the electrical cord. Your vehicle may have a memory function which lets The cord is located on the driver’s side of the pedal settings be saved and recalled.
Page 117: Active Fuel Management
Automatic Transmission Operation How long should you keep the coolant heater plugged in? The answer depends on the outside temperature, There are several different the kind of oil you have, and some other things. Instead positions for the shift lever. of trying to list everything here, we ask that you contact your dealer/retailer in the area where you will be parking your vehicle.
Page 118 PARK (P): This position locks your rear wheels. It is the best position to use when you start your engine CAUTION: because your vehicle cannot move easily. If you have four-wheel drive, your vehicle CAUTION: will be free to roll — even if your shift lever is in PARK (P) —...
Page 119 DRIVE (D) can be used when towing a trailer, carrying a heavy load, driving on steep hills or for off-road driving. CAUTION: You may want to shift the transmission to THIRD (3) or, if necessary, a lower gear selection if the transmission shifts too often.
Page 120: Tow/Haul Mode
Tow/Haul Mode FIRST (1): This position reduces vehicle speed even more than SECOND (2) without using your brakes. You can use it on very steep hills, or in deep snow or mud. If the shift lever is put in FIRST (1) while the vehicle is moving forward, the transmission will not shift into ﬁrst gear until the vehicle is going slowly enough.
Page 121: Four-Wheel Drive
Four-Wheel Drive Automatic Transfer Case If your vehicle has four-wheel drive, you can send The transfer case knob is your engine’s driving power to all four wheels for located to the left of the extra traction. Read the part that follows before instrument panel cluster.
Page 122 You can choose among ﬁve driving settings: (Four-Wheel Drive High): Use the four-wheel high position when you need extra traction, such as Indicator lights in the switches show you which setting on snowy or icy roads or in most off-road situations. you are in.
Page 123 Shifting Into Four-Wheel Drive Low NEUTRAL (N): Shift the vehicle’s transfer case to NEUTRAL only when towing your vehicle. See When Four-Wheel Low is engaged, vehicle speed Recreational Vehicle Towing on page 4-42 or Towing should be kept below 45 mph. Extended high-speed Your Vehicle on page 4-42 for more information.
Page 124 If the knob is turned to the Four-Wheel Drive Low Notice: Shifting the transmission into gear before position when your vehicle is in gear and/or moving, the Four-Wheel Drive Low indicator light has stopped the Four-Wheel Drive Low indicator light will ﬂash ﬂashing could damage the transfer case.
Page 125 Shifting into NEUTRAL Shifting Out of NEUTRAL To shift out of NEUTRAL do the following: To shift the transfer case to NEUTRAL do the following: 1. Set the parking brake and apply the regular brake 1. Make sure the vehicle is parked so that it will not roll. pedal.
Page 126: Parking Brake
Parking Brake If the ignition is on when the parking brake is released, the brake system warning light goes off. To set the parking brake, hold the regular brake pedal Notice: Driving with the parking brake on can down with your right foot. Push down the parking overheat the brake system and cause premature brake pedal with your left foot.
Page 127: Shifting Into Park
Shifting Into Park CAUTION: (Continued) CAUTION: So, be sure the transfer case is in a drive gear — not in NEUTRAL. If you are pulling a trailer, see Towing a Trailer on page 4-47. It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with 1.
Page 128: Leaving Your Vehicle With The Engine Running
Leaving Your Vehicle With the Engine If you have to leave your vehicle with the engine running, be sure your vehicle is in PARK (P) and the Running parking brake is ﬁrmly set before you leave it. After you move the shift lever into PARK (P), hold the regular brake pedal down.
Page 129: Shifting Out Of Park
Shifting Out of Park If you still are unable to shift out of PARK (P): 1. Ease the pressure on the shift lever. This vehicle is equipped with an electronic shift lock 2. While holding down the brake pedal, press the shift release system.
Page 130: Engine Exhaust
Engine Exhaust Running the Vehicle While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. CAUTION: CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you cannot see or smell.
Page 131: Mirrors
Follow the proper steps to be sure your vehicle will not move. See Shifting Into Park on page 2-45. CAUTION: If you are pulling a trailer, see Towing a Trailer on page 4-47. It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with Mirrors the parking brake ﬁrmly set.
Page 132: Temperature And Compass Display
Temperature and Compass Display Automatic Dimming Mirror Operation Press the on/off button, located on the far left of the The automatic dimming mirror function is turned mirror face, to turn the compass/temperature display on automatically each time the ignition is started. on or off.
Page 133 To adjust for compass variance, do the following: 3. Keep pressing the on/off button until the desired zone number appears in the display. Release the 1. Find your current location and variance zone button. After approximately four seconds of number on the following zone map. inactivity, the new zone number will be locked in and the compass/temperature display will return.
Page 134: Display
Cleaning the Mirror Temperature Display When cleaning the mirror, use a paper towel or similar The temperature can be displayed by pressing the material dampened with glass cleaner. Do not spray TEMP button. Pressing the TEMP button once brieﬂy, glass cleaner directly on the mirror as that may cause will toggle the temperature reading on and off.
Page 135: Compass Operation
Compass Operation In order to calibrate, CAL must be displayed in the mirror compass windows. If CAL is not displayed, push Press the COMP button once brieﬂy to turn the compass in the COMP button for approximately eight seconds on or off. or until CAL is displayed.
Page 136: Outside Power Mirrors
Cleaning the Mirror To adjust for compass variance: 1. Find your current location and variance zone Use a paper towel or similar material dampened with number on the following zone map. glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing.
Page 137 Manual Folding Convex Mirror The mirrors can be manually folded inward to prevent The passenger’s side mirror may have convex glass. damage when going through an automatic car wash. A convex mirror’s surface is curved so more can To fold, push the mirror toward the vehicle. To return the be seen from the driver’s seat.
Page 138: Outside Power Foldaway Mirrors
Outside Power Foldaway Mirrors If the mirrors are accidentally folded/unfolded manually, they may shake or ﬂutter at normal driving speeds and may not stay in the unfolded position. If this If your vehicle is equipped happens, you will need to reset the mirrors. See with outside power “Resetting the Power Foldaway Mirrors”...
Page 139 Park Tilt Mirrors Convex Mirror If your vehicle has the memory package, the outside mirrors are able to perform the park tilt function. This CAUTION: feature may be useful in allowing the driver to view the curb when parallel parking. This feature will cause the passenger’s and/or driver’s mirror to tilt to a preselected A convex mirror can make things (like other position when the vehicle is in REVERSE (R).
Page 140: Object Detection Systems
Object Detection Systems CAUTION: Ultrasonic Rear Parking Assist (URPA) The Ultrasonic Rear Parking Assist (URPA) system does not replace driver vision. For vehicles with the Ultrasonic Rear Parking It cannot detect: Assist (URPA) system, it operates at speeds less than •...
Page 141: How The System Works
The display is located To be detected, objects must be at least 10 inches above the rear window and (25.4 cm) off the ground and below tailgate level. can be seen by looking Objects must also be within 8 feet (2.5 m) from the over your right shoulder.
Page 142 When the System Does Not Seem to The system can be disabled by pressing the Work Properly rear park aid disable button located next to the radio. If the URPA system will not activate due to a temporary The indicator light will condition, the message PARKING ASSIST OFF will be come on and PARKING displayed on the DIC and a red light will be shown on...
Page 143: Onstar System
® OnStar System OnStar service is provided to you subject to the OnStar Terms and Conditions. You may cancel your OnStar service at any time by contacting OnStar. A complete OnStar Owner’s Guide and the OnStar Terms and Conditions are included in the vehicle’s OnStar Subscriber glove box literature.
Page 144: Onstar Virtual Advisor
Available Services with Safe & Sound Plan OnStar Hands-Free Calling • Automatic Notiﬁcation of Airbag Deployment OnStar Hands-Free Calling allows eligible OnStar subscribers to make and receive calls using voice • Advanced Automatic Crash Notiﬁcation (AACN) commands. Hands-Free Calling is fully integrated into the (If equipped) vehicle, and can be used with OnStar Pre-Paid Minute •...
Page 145: Onstar Steering Wheel Controls
OnStar Steering Wheel Controls OnStar service cannot work unless your vehicle is in a place where OnStar has an agreement with a wireless Your vehicle may have a Talk/Mute button that can service provider for service in that area. OnStar service be used to interact with OnStar Hands-Free Calling.
Page 146: Universal Home Remote System
Universal Home Remote Universal Home Remote System Operation (With Three Round LED) System The Universal Home Remote System provides a way to replace up to three hand-held Radio-Frequency (RF) transmitters used to activate devices such as garage door openers, security systems, and home lighting. This device complies with Part 15 of the FCC Rules.
Page 147 Be sure to keep the original remote control Programming a garage door opener involves transmitter for use in other vehicles, as well as, time-sensitive actions, so read the entire procedure for future programming. Only the original remote control before starting. Otherwise, the device will time out transmitter is needed for Fixed Code programming.
Page 148 3. Immediately return to the vehicle. Press and hold the Universal Home Remote button that will be used to control the garage door until the garage door moves. The indicator light, above the selected button, should slowly blink. This button may need to be held for up to 20 seconds.
Page 149 Programming Universal Home To program up to three devices: Remote — Fixed Code For questions or help programming the Universal Home Remote System, call 1-866-572-2728 or go to www.learcar2u.com. Most garage door openers sold before 1996 are Fixed Code units. Programming a garage door opener involves time-sensitive actions, so read the entire procedure before starting.
Page 150 The garage door opener receiver (motor head unit) could also have a row of dip switches that can be used when programming the Universal Home Remote. If the total number of switches on the motor head and hand held transmitter are different, or if the dip switch settings are different, use the dip switch settings on the motor head unit to program the Universal Home Remote.
Page 151 2. Write down the eight to 12 switch settings from left to right as follows: • When a switch is in the up position, write “Left.” • When a switch is in the down position, write “Right.” • If a switch is set between the up and down position, write “Middle.”...
Page 152 Reprogramming Universal Home 5. After entering all of the switch positions, again, ﬁrmly press and release all three buttons at the Remote Buttons same time. The indicator lights will turn on. Any of the three buttons can be reprogrammed by 6.
Page 153: Storage Areas
Storage Areas Center Overhead Console Your vehicle may have an overhead console with Glove Box reading lights and a small storage area. Press the button next to the light to turn it on and off. To open the glove box, lift up on the lever. Front Armrest Storage Area Cupholders Your vehicle may have a center armrest storage...
Page 154: Luggage Carrier
Luggage Carrier Be sure the cargo is properly loaded. • If small heavy objects are placed on the roof, cut a The vehicle may have a luggage carrier that can be piece of 3/8 inch plywood to ﬁt inside the crossrails used to load things on top of the vehicle.
Page 155: Rear Storage Area
Rear Storage Area To remove a cargo panel(s), do the following: 1. Lower the tailgate. See Tailgate on page 2-22 for Your vehicle has a rear armrest/cupholder for the rear more information on the tailgate. seat passengers. To open it, pull up and then out on the tab, located at the top center of the armrest, and pull the armrest down.
Page 156 2. Remove cargo panel 3 by pulling the left and right 3. Pull each cargo panel up and then out from the cargo panel latches, located on the bottom of each side rails and set it aside. Remove as many cargo panel, forward to unlock the cargo panel cargo panels as needed.
Page 157: Cargo Panel Storage System
To store the panels, do the following: 1. Secure the storage strap system in the 4. If cargo panel 1 needs to be removed. There are cargo storage area by latches on both sides that need to be released. attaching the six clips After you have removed each cargo panel, store them included on the cargo within the cargo storage area using the cargo panel...
Page 158 Always use the storage strap system to store the cargo panels during driving. Before storing the cargo panels, be sure that the latches are in the locked position. The latches are in the locked position when they are parallel to the front and back edge of the panel.
Page 159 3. Store cargo panel 2 by loading the cargo panel with 4. Store cargo panel 3 by loading the cargo panel with latches down and facing toward you. latches up and facing away from you. 2-77...
Page 160 6. Tighten all straps by pulling on the free end of each strap. 5. Place the primary straps over the three cargo covers (A). Fasten the four strap clips (B). 2-78...
Page 161 7. Close both cross locks at the center of the strap system to secure tightly. Panels 3, 2, 1 Loaded 2-79...
Page 162: Reinstalling The Cargo Cover Panels
Reinstalling the Cargo Cover Panels To reinstall a cargo panel do the following. 1. You can either leave the strap system attached to the side of the cargo area while it is not in use, or you can store it inside the top box storage compartment.
Page 163 4. Install cargo cover 2 next. Place the latches in the unlocked position. Place the cargo cover panel on the cargo area rails while holding the back of the cargo panel up. 3. Push both left latches away from you to lock the Left Side Shown, Right Side Similar latches.
Page 164 Left Side Shown, Right Side Similar Push the panel forward until it is snug against the other panel and then let the back of the panel down 5. Push the latches away from you, starting with the being sure that the pegs align with the receivers. left latch, to lock the panel in place.
Page 165 Folding and Storage of Straps To store the folding straps inside the top box storage compartment, do the following: 1. Extend the six strap ends on a ﬂat surface. 7. Push the latches away from you, starting with the left latch, to lock the panel in place. You should hear a click when each latch locks.
Page 166: Cargo Tie Downs
2. Fold the four primary strap ends towards the center 4. Take the secondary strap and wrap it around the as shown. package. Finally, attach the hooks to the webbing and place inside the top box storage compartment. Cargo Tie Downs Cargo tie downs are located in the rear cargo area that can be used to secure cargo.
Page 167: All-Weather Cargo Area
All-Weather Cargo Area Your vehicle has the ability to operate in many different ® conﬁgurations--cargo panels on or off, Midgate or down, rear glass in or out. The vehicle has features to help it resist the elements and protect cargo inside the cargo area.
Page 168 Maintenance and Cleaning To remove each drain grate, do the following: 1. Remove the cargo panels or tonneau cover. See To ensure that the water management system performs Cargo Cover Panels on page 2-73 or Tonneau ® properly, be sure that the Midgate , tailgate and cover Cover on page 2-90 for more information.
Page 169: Side Rail Channels
Side Rail Channels To replace the drain grate do the following: 1. Line up the clips on the vehicle with the slots in the The side rail channels are located on top of both sides grate. of the cargo area. Flush them out with clean water 2.
Page 170 ® Midgate Drain Grate Removal and After hauling dirt, wood chips, pebbles etc. you will need ® to ﬂush the Midgate drain with water. But ﬁrst you will Cleaning have to remove the drain grate by using the following steps: ®...
Page 171: Top-Box Storage
Cargo Area Floor Drains Top-Box Storage Your vehicle also has four cargo-area ﬂoor drains Your vehicle has top-box storage units on both sides of located under the cargo mat near the sides of the cargo the vehicle. The passenger side top box contains the area.
Page 172: Tonneau Cover
Tonneau Cover CAUTION: Improperly stored tonneau cover components could be thrown about the vehicle during a collision or sudden maneuver. You or others could be injured. If you remove the cover, bows and rails, always store them properly in the cargo area. When you put them back, always be sure that they are securely reattached.
Page 173: Removing The Tonneau Cover
Removing the Tonneau Cover 2. Pull the back of the cover out from the rear rail (D). 1. Starting at the rear corner of the driver’s side of the vehicle, pull the loop (F) toward you and then pull up so the plastic lip (E) releases from the channel in the rear rail (D) and the side rail (C).
Page 174 3. Roll the cover toward the front of the vehicle. The 4. Stow the cover using the buckles and the straps plastic lip (E) will release from the siderails (C) as attached to the front rail. you roll the cover forward. You can also store the tonneau cover outside of the vehicle or use the storage bag included.
Page 175 To use the storage bag, do the following: 2. With the tonneau cover rolled up, place it in the proper compartment in the bag and zip the bag shut. 1. Attach the bag to the cargo tie downs as shown. Unzip the top of the storage bag.
Page 176 Removing the Front/Rear Rails 2. Remove the two bows by gently pushing and Bows them against the spring-loaded end. Before moving on to the next step, you will want to Set the bow aside. attach the storage bag to the cargo tie downs, if it is not already attached, so you will have a place ready to store the front and back rails and the two bows.
Page 177 4. Remove the front rail by ﬁrst twisting up the edge 5. Stow both bows and the front and rear rails in the nearest you, to clear the midgate seals, and then storage bag. When all components of the tonneau pulling it out from the side rails.
Page 178: Sunroof
Sunroof Reverse the procedure to reinstall the tonneau cover using the following suggestions: Your vehicle may be equipped with a power sliding • When reinstalling the front rail, start by holding the sunroof. To open or close the sunroof, the ignition needs back edge of the rail up and then twisting the back to be turned to ON, or Retained Accessory Power (RAP) edge down while pushing it into place.
Page 179 The sunroof has a comfort stop feature which stops the When the sunroof is opened, an air deﬂector will sunroof from opening to the full-open position. From the automatically raise. The air deﬂector will retract when the comfort stop position, press the rear of the driver’s side sunroof is closed.
Page 180 NOTES 2-98...
Page 181: Instrument Panel
Section 3 Instrument Panel Instrument Panel Overview .......3-4 Accessory Power Outlet(s) ......3-20 Hazard Warning Flashers ........3-6 Ashtray(s) and Cigarette Lighter ......3-20 Other Warning Devices ........3-6 Climate Controls ..........3-21 Horn .............3-6 Climate Control System .........3-21 Tilt Wheel .............3-7 Dual Automatic Climate Control System ...3-24 Turn Signal/Multifunction Lever ......3-7 Outlet Adjustment .........3-31 Turn and Lane-Change Signals ......3-8...
Page 182 Section 3 Instrument Panel Fog Lamp Light ..........3-48 Audio System(s) ..........3-75 Cruise Control Light ........3-48 Setting the Clock ..........3-76 Highbeam On Light ........3-48 Radio(s) (MP3) ..........3-78 Tow/Haul Mode Light ........3-48 Using an MP3 (Radio with CD or Fuel Gage ...........3-49 Six-Disc CD Player) ........3-96 Low Fuel Warning Light .........3-50 Using an MP3 (Radio with CD and...
Page 183 NOTES...
Page 184: Instrument Panel Overview
Instrument Panel Overview...
Page 185 The main components of the instrument panel are the following: A. Air Outlets. See Outlet Adjustment on page 3-31. M. Tilt Wheel Lever. See Tilt Wheel on page 3-7. B. Turn Signal/Multifunction Lever. See Turn N. Horn. See Horn on page 3-6. Signal/Multifunction Lever on page 3-7.
Page 186: Hazard Warning Flashers
Hazard Warning Flashers The hazard warning ﬂashers work no matter what ignition position the key is in, and even if the key is not in the ignition. The hazard warning ﬂashers warn others. They also let the police and other emergency vehicles know you When the hazard warning ﬂashers are on, your vehicle’s have a problem.
Page 187: Tilt Wheel
Tilt Wheel Turn Signal/Multifunction Lever The tilt steering wheel allows you to adjust the steering wheel before you drive. You can raise it to the highest level to give your legs more room when you enter and exit the vehicle. The lever on the left side of the steering column includes the following: •...
Page 188: Turn Signal/Multifunction Lever
Turn and Lane-Change Signals As you signal a turn or a lane change, if the arrows ﬂash more quickly than normal, a signal bulb may be burned out and other drivers will not see your The turn signal has two upward (for right) and two turn signal.
Page 189: Headlamp High/Low-Beam Changer
Headlamp High/Low-Beam Changer To use it, pull the turn signal lever toward you, then release it. If your headlamps are in the automatic position or on (Headlamp High/Low Beam Changer): To low beam, your high-beam headlamps will turn on. change the headlamps from low to high beam, push the They will stay on as long as you hold the lever toward lever toward the instrument panel.
Page 190: Rainsense™ Ii Wipers
Rainsense™ II Wipers Turn the band with the wiper symbol to control the windshield wipers. If your vehicle has Rainsense™ II windshield wipers, (Mist): Turn the band to mist for a single wiping the moisture sensor is located next to the inside rearview cycle.
Page 191: Windshield Washer
Windshield Washer The button is located in the switchbank under the climate controls. CAUTION: In freezing weather, do not use your washer until the windshield is warmed. Otherwise the washer ﬂuid can form ice on the windshield, Push the heated washer ﬂuid button to activate the heated windshield washer ﬂuid system.
Page 192: Cruise Control
Cruise Control The cruise control buttons are located on left side of the steering wheel. CAUTION: Cruise control can be dangerous where you cannot drive safely at a steady speed. So, do not use your cruise control on winding roads or in heavy traffic.
Page 193 Setting Cruise Control Resuming a Set Speed Suppose you set your cruise control at a desired speed Cruise control will not work if your parking brake is set, and then you apply the brake. This shuts off the or if the master cylinder brake ﬂuid level is low. cruise control.
Page 194: Exterior Lamps
Passing Another Vehicle While Using Exterior Lamps Cruise Control The exterior lamps Use the accelerator pedal to increase your speed. control is located on the When you take your foot off the pedal, your vehicle will instrument panel to the left slow down to the previous set cruise speed.
Page 195: Headlamps On Reminder
AUTO (Automatic): Turn the control to this position When the headlamps are turned on while the vehicle is to automatically turn on the headlamps at normal on, the headlamps turn off automatically 10 minutes after brightness, together with the following: the ignition is turned off.
Page 196: Daytime Running Lamps (Drl)
Daytime Running Lamps (DRL) Automatic Headlamp System Daytime Running Lamps (DRL) can make it easier When it is dark enough outside and the headlamp for others to see the front of your vehicle during the day. switch is in AUTO, the automatic headlamp system will DRL can be helpful in many different driving conditions, turn on the headlamps at the normal brightness along but they can be especially helpful in the short periods...
Page 197: Fog Lamps
If the vehicle is started in a dark garage, the automatic Remember, fog lamps alone will not give off as much headlamp system will come on immediately. Once the light as your headlamps. Never use your fog lamps vehicle leaves the garage, it takes approximately one in the dark without turning on the headlamps.
Page 198: Instrument Panel Brightness
Instrument Panel Brightness Dome Lamp Override The knob for this feature is located next to the exterior The dome lamp override button is located next to the lamps control. exterior lamps control. (Instrument Panel Lights): Turn the knob (Dome Off): Press the button in and the dome clockwise or counterclockwise to brighten or dim the lamps remain off when a door is opened.
Page 199: Electric Power Management
Electric Power Management EPM works to prevent excessive discharge of the battery. It does this by balancing the generator’s output and the vehicle’s electrical needs. It can increase The vehicle has Electric Power Management (EPM) that engine idle speed to generate more power, whenever estimates the battery’s temperature and state of charge.
Page 200: Accessory Power Outlet(S)
Accessory Power Outlet(s) Ashtray(s) and Cigarette Lighter Your vehicle may have two accessory power outlets If your vehicle has this feature it is located in the center located on the instrument panel and one inside console or on the instrument panel. Pull up on the the center ﬂoor console.
Page 201: Climate Controls
Climate Controls (Floor): This mode directs most of the air to the ﬂoor outlets, with some of the air directed to the windshield, side window outlets, and second row ﬂoor Climate Control System outlets. In this mode, the system will automatically select outside air.
Page 202 Temperature Control: Rotate the thumbwheels up or (Recirculation): Press this button to turn on the down to increase or decrease the temperature on the recirculation mode. When the button is pressed, an driver’s side or the passenger side of the vehicle for the indicator light will come on.
Page 203 Defogging and Defrosting Rear Window Defogger Fog on the inside of the windows is a result of high The rear window defogger uses a warming grid to humidity (moisture) condensing on the cool window remove fog from the rear window. glass.
Page 204: Dual Automatic Climate Control System
Dual Automatic Climate Control Driver’s Side Temperature Control System The driver’s side temperature buttons are used to adjust the temperature of the air coming through the system on With this system, you can control the heating, cooling the driver’s side. The temperature can be adjusted even and ventilation in your vehicle.
Page 205: Automatic Operation
Passenger’s Side Temperature Control Automatic Operation The passenger’s temperature buttons can be used to AUTO (Automatic): When automatic operation is change the temperature of the air coming through the active the system will control the inside temperature, system on the passenger’s side of the vehicle. The the air delivery, and the fan speed.
Page 206 2. Set the driver’s and passenger’s temperature. (On/Off): Press this button to turn off the climate To ﬁnd your comfort setting, start with a 74°F control system. Outside air will still enter the vehicle, and (23°C) temperature setting and allow about will be directed to the ﬂoor.
Page 207: Manual Operation
Manual Operation (Vent): This setting will deliver air to the instrument panel outlets. You may manually adjust the air delivery mode or fan speed. (Bi-Level): This mode directs half of the air to the instrument panel outlets and to the ﬂoor outlets. The ﬂow y9 z (Fan): The buttons with the fan symbols can be divided between vent and ﬂoor outlets depending...
Page 208: Air Conditioning
Air Conditioning (Recirculation): Press this button to turn the recirculation mode on. When the button is pressed, an indicator light will come on. (Air Conditioning): Press this button to turn the air conditioning (A/C) compressor on and off. When This mode keeps outside air from entering the vehicle. air conditioning is selected, an indicator light will come It can be used to reduce outside air and prevent on to let you know that the air conditioning has been...
Page 209 Sensors There is also an interior temperature sensor located next to the steering wheel that measures the temperature of the air inside your vehicle. There is also an exterior temperature sensor located The solar sensor, located in the defrost grille, middle behind the front grille.
Page 210 In order to prevent false temperature readings at Use the mode up and down arrows to select the defog startup, the displayed temperature will not change until or defrost modes. the following occurs: (Defog): The defog mode is used to clear the •...
Page 211: Outlet Adjustment
Rear Window Defogger Outlet Adjustment The rear window defogger uses a warming grid to Your vehicle has air outlets located in the center and on remove fog from the rear window. the side of your instrument panel that allow you to adjust the direction and amount of airﬂow inside the vehicle.
Page 212: Warning Lights, Gages, And Indicators
Warning Lights, Gages, and Gages can indicate when there may be or is a problem with one of your vehicle’s functions. Often gages Indicators and warning lights work together to let you know when there is a problem with your vehicle. This part describes the warning lights and gages on When one of the warning lights comes on and stays on your vehicle.
Page 213: Instrument Panel Cluster
Instrument Panel Cluster United States version shown. Canada similar. Your instrument cluster is designed to let you know at a glance how your vehicle is running. You will know how fast you are going, about how much fuel you have and many other things you will need to know to drive safely and economically.
Page 214: Speedometer And Odometer
Speedometer and Odometer Safety Belt Reminders Your speedometer lets you see your speed in both Safety Belt Reminder Light miles per hour (mph) and kilometers per hour (km/h). When the engine is started, a chime will come on for Your odometer shows how far your vehicle has several seconds to remind people to fasten their safety been driven, in either miles (used in the United States) belts, unless the driver’s safety belt is already buckled.
Page 215: Passenger Safety Belt Reminder Light
Passenger Safety Belt Reminder Light Airbag Readiness Light Several seconds after the engine is started, a chime will There is an airbag readiness light on the instrument sound for several seconds to remind the front passenger panel cluster, which shows the airbag symbol. to buckle their safety belt.
Page 216: Passenger Airbag Status Indicator
Passenger Airbag Status Indicator If the airbag readiness light stays on after you start the vehicle or comes on when you are driving, your airbag system may not work properly. Your vehicle has the passenger sensing system. Have your vehicle serviced right away. Your overhead console has a passenger airbag status indicator.
Page 217 CAUTION: CAUTION: If the on indicator comes on when you have a Even though the passenger sensing system is rear-facing child restraint installed in the right designed to turn off the right front passenger’s front passenger’s seat, it means that the frontal airbag if the system detects a rear-facing passenger sensing system has not turned off child restraint, no system is fail-safe, and no...
Page 218: Charging System Light
Charging System Light If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing This light will come on system. See your dealer/retailer for service. brieﬂy when you turn on the ignition key, but the engine is not running,...
Page 219: Voltmeter Gage
Voltmeter Gage Readings in the low warning zone may occur when a large number of electrical accessories are operating in the vehicle and the engine is left at an idle for an When your engine is not extended period. This condition is normal since the running, but the ignition is charging system is not able to provide full power at on, this gage shows...
Page 220 This light may also come on due to low brake ﬂuid. See Brakes on page 5-38 for more information. CAUTION: Your brake system may not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to an accident.
Page 221: Anti-Lock Brake System (Abs) Warning Light
® Anti-lock Brake System (ABS) StabiliTrak Indicator Light Warning Light This warning light should come on brieﬂy when the For vehicles with engine is started. the Antilock Brake System (ABS), this light comes on brieﬂy when the engine is started. If the warning light does not come on then, have it ﬁxed so it will be ready to warn you if there is a problem.
Page 222: Engine Coolant Temperature Gage
Engine Coolant Temperature Gage Tire Pressure Light This light comes on brieﬂy when the engine is started. United States Canada This gage shows the engine coolant temperature. This light will also come on when one or more of your tires are signiﬁcantly underinﬂated. It also provides an indicator of how hard your vehicle is A tire pressure message in the Driver Information working.
Page 223: Malfunction Indicator Lamp
Malfunction Indicator Lamp Notice: Modiﬁcations made to the engine, transmission, exhaust, intake, or fuel system of Check Engine Light your vehicle or the replacement of the original tires with other than those of the same Tire Performance A computer system called OBD II (On-Board Criteria (TPC) can affect your vehicle’s emission Diagnostics-Second Generation) monitors operation controls and can cause this light to come on.
Page 224: If The Light Is Flashing
If the Light is Flashing If the Light Is On Steady The following can prevent more serious damage to your You might be able to correct the emission system vehicle: malfunction by considering the following: • Reduce vehicle speed. Did you recently put fuel into your vehicle? •...
Page 225: Emissions Inspection And Maintenance Programs
Emissions Inspection and Maintenance Have you recently changed brands of fuel? Programs If so, be sure to fuel your vehicle with quality fuel. See Gasoline Octane on page 5-5. Poor fuel quality causes Some state/provincial and local governments have or the engine not to run as efficiently as designed.
Page 226: Oil Pressure Gage
Oil Pressure Gage A reading in the low pressure zone may be caused by a dangerously low oil level or some other problem causing low oil pressure. Check your oil as soon as possible. CAUTION: Do not keep driving if the oil pressure is low. If you do, your engine can become so hot that it catches ﬁre.
Page 227: Oil Pressure Light
Oil Pressure Light This light will come on brieﬂy when you start your engine as a check to be sure it works. If it does not, CAUTION: have your vehicle serviced. Do not keep driving if the oil pressure is low. If you do, your engine can become so hot that it catches ﬁre.
Page 228: Fog Lamp Light
Fog Lamp Light Highbeam On Light The fog lamp light will This light comes on when come on when the fog the high-beam headlamps lamps are in use. are in use. The light will go out when the fog lamps are turned off. See Headlamp High/Low-Beam Changer on page 3-9 See Fog Lamps on page 3-17 for more information.
Page 229: Fuel Gage
Fuel Gage When the fuel tank is low, the FUEL LEVEL LOW message will appear in the Driver Information Center (DIC). See DIC Warnings and Messages on page 3-59 for more information. Here are some situations you may experience with your fuel gage.
Page 230: Low Fuel Warning Light
Low Fuel Warning Light Driver Information Center (DIC) Your vehicle has a Driver Information Center (DIC). This light, under the fuel gage, will come on brieﬂy The DIC displays information about your vehicle. It also when you are starting displays warning messages if a system problem is the engine.
Page 231: Dic Operation And Displays
DIC Operation and Displays DIC Buttons (With DIC Buttons) The buttons are the trip/fuel, vehicle If your vehicle has DIC buttons, the information below information, customization, explains the operation of this system. and set/reset buttons. The DIC has different displays which can be accessed The button functions by pressing the DIC buttons located on the instrument are detailed in the...
Page 232 Trip Odometer (Customization): Press this button to customize the feature settings on your vehicle. See DIC Vehicle Press the trip/fuel button until TRIP displays. This Customization (With DIC Buttons) on page 3-66 for more display shows the current distance traveled in either information.
Page 233 Fuel Range Fuel Used Press the trip/fuel button until FUEL RANGE displays. Press the trip/fuel button until FUEL USED displays. This display shows the approximate number of This display shows the number of gallons (gal) or remaining miles (mi) or kilometers (km) the vehicle liters (L) of fuel used since the last reset of this menu can be driven without refueling.
Page 234 Transmission Temperature Vehicle Information Menu Items Press the trip/fuel button until TRANS TEMP displays. (Vehicle Information): Press this button to scroll This display shows the temperature of the automatic through the following menu items: transmission ﬂuid in either degrees Fahrenheit (°F) or Oil Life degrees Celsius (°C).
Page 235: Tire Pressure
Units Engine Hours Press the vehicle information button until ENGINE Press the vehicle information button until UNITS HOURS displays. This display shows the total number displays. This display allows you to select between of hours the engine has run. English or Metric units of measurement. Once in this display, press the set/reset button to select between Relearn Remote Key ENGLISH or METRIC units.
Page 236: Dic Operation And Displays
Blank Display Trip Odometer Reset Stem Menu Items Odometer This display shows no information. Press the trip odometer reset stem until ODOMETER DIC Operation and Displays displays. This display shows the distance the vehicle has been driven in either miles (mi) or kilometers (km). (Without DIC Buttons) Engine Hours If your vehicle does not have DIC buttons, the...
Page 237 Oil Life The trip odometer has a feature called the retro-active reset. This can be used to set the trip odometer to the To access this display, the vehicle must be in PARK (P). number of miles (kilometers) driven since the ignition was Press the trip odometer reset stem until OIL LIFE last turned on.
Page 238 Relearn Remote Key Language To access this display, the vehicle must be in PARK (P). This display allows you to select the language in which This display allows you to match Remote Keyless the DIC messages will appear. To select a language: Entry (RKE) transmitters to your vehicle.
Page 239: Dic Warnings And Messages
DIC Warnings and Messages CHANGE ENGINE OIL SOON This message displays when the engine oil needs to Messages are displayed on the DIC to notify the driver be changed. When you change the engine oil, be sure to that the status of the vehicle has changed and that some reset the CHANGE ENGINE OIL SOON message.
Page 240: Engine Overheated Stop Engine
DRIVER DOOR OPEN ENGINE OVERHEATED IDLE ENGINE Notice: If you drive your vehicle while the engine This message displays and a chime sounds if the driver is overheating, severe engine damage may occur. door is not fully closed and the vehicle is in a drive gear.
Page 241: Oil Pressure Low Stop Engine
ENGINE POWER IS REDUCED LEFT REAR DOOR OPEN This message displays and a chime sounds when the This message displays and a chime sounds if the driver cooling system temperature gets too hot and the engine side rear door is not fully closed and the vehicle is in further enters the engine coolant protection mode.
Page 242 PARK ASSIST OFF REPLACE BATTERY IN REMOTE KEY If your vehicle has the Ultrasonic Rear Parking This message displays if a Remote Keyless Entry (RKE) Assist (URPA) system, after the vehicle has been transmitter battery is low. The battery needs to be started, this message displays to remind the driver replaced in the transmitter.
Page 243: Service Air Bag
SERVICE AIR BAG SERVICE BRAKES SOON This message displays if there is a problem with This message displays if there is a problem with the the airbag system. Have your dealer/retailer inspect brake system. If this message appears, stop as soon as the system for problems.
Page 244: Service Suspension System
SERVICE SUSPENSION SYSTEM SERVICE TRACTION CONTROL ® ® If your vehicle has the Autoride suspension system, If your vehicle has StabiliTrak , this message displays ® this message displays when the Autoride suspension when there is a problem with the Traction Control system is not operating properly.
Page 245 TIGHTEN GAS CAP There are several conditions that can cause this message to appear. This message may display along with the check engine • One condition is overheating, which could occur if light on the instrument panel cluster if the vehicle’s fuel ®...
Page 246: Dic Vehicle Customization
TRACTION CONTROL OFF WASHER FLUID LOW ADD FLUID ® If your vehicle has StabiliTrak , this message displays This message displays when the windshield washer when the Traction Control System (TCS) is turned ﬂuid is low. Fill the windshield washer ﬂuid reservoir ®...
Page 247 Entering the Feature Settings Menu DISPLAY LANGUAGE This feature allows you to select the language in which 1. Turn the ignition on and place the vehicle in the DIC messages will appear. PARK (P). To avoid excessive drain on the battery, it is Press the customization button until the DISPLAY recommended that the headlamps are turned off.
Page 248 AUTO DOOR LOCK AUTO DOOR UNLOCK This feature allows you to select whether or not to This feature allows you to select when the vehicle’s turn off the automatic door unlocking feature. It also doors will automatically lock. See Programmable allows you to select which doors and when the doors will Automatic Door Locks on page 2-11 for more automatically unlock.
Page 249: Remote Door Lock
REMOTE DOOR LOCK To select a setting, press the set/reset button while the desired setting is displayed on the DIC. This feature allows you to select the type of feedback you will receive when locking the vehicle with the REMOTE DOOR UNLOCK Remote Keyless Entry (RKE) transmitter.
Page 250: Exit Lighting
DELAY DOOR LOCK EXIT LIGHTING This feature allows you to select whether or not the This feature allows you to select the amount of time you locking of the vehicle’s doors and tailgate will be delayed. want the exterior lamps to remain on when it is dark When locking the doors and tailgate with the power door enough outside.
Page 251: Approach Lighting
APPROACH LIGHTING CHIME VOLUME This feature allows you to select whether or not to This feature allows you to select the volume level of the have the exterior lights turn on brieﬂy during low light chime. periods after unlocking the vehicle using the Remote Press the customization button until CHIME VOLUME Keyless Entry (RKE) transmitter.
Page 252: Park Tilt Mirrors
PARK TILT MIRRORS EASY EXIT SEAT If your vehicle has this feature, it allows you to select If your vehicle has this feature, it allows you to select whether or not the outside mirror(s) will automatically tilt your preference for the automatic easy exit seat feature. down when the vehicle is shifted into REVERSE (R).
Page 253: Remote Start
MEMORY SEAT RECALL REMOTE START If your vehicle has this feature, it allows you to select If your vehicle has this feature, it allows you to turn the your preference for the remote memory seat recall remote start off or on. The remote start feature allows feature.
Page 254: Factory Settings
FACTORY SETTINGS EXIT FEATURE SETTINGS This feature allows you to set all of the customization This feature allows you to exit the feature features back to their factory default settings. settings menu. Press the customization button until FACTORY Press the customization button until PRESS TO EXIT SETTINGS appears on the DIC display.
Page 255: Audio System(S)
Audio System(s) While your vehicle is parked: • Familiarize yourself with all of its controls. Determine which radio your vehicle has and then • Familiarize yourself with its operation. read the pages following to familiarize yourself with its features. • Set up your audio system by presetting your favorite radio stations, setting the tone, and adjusting the speakers.
Page 256: Setting The Clock
Setting the Clock Changing the Time and Date Default Settings MP3 Radios with a Single CD or a To change the time default setting from 12 hour to Single CD and DVD Player 24 hour or to change the date default setting from month/day/year to day/month/year, follow these If the vehicle has a radio with a single CD or a CD and instructions:...
Page 257 MP3 Radio with a Six-Disc CD Player Changing the Time and Date Default Settings If the vehicle has a radio with a six-disc CD player, the To change the time default setting from 12 hour to radio has a MENU button instead of the (clock) 24 hour or to change the date default setting from button to set the time and date.
Page 258: Radio(S) (Mp3)
Radio(s) (MP3) Radio with CD and DVD Radio with CD shown, Radio with Six-Disc CD The vehicle has one of these radios as its audio similar system. 3-78...
Page 259: Playing The Radio
Radios with CD and DVD Playing the Radio ® Radios with CD and DVD have a Bose Surround (Power/Volume): Press to turn the system on Sound System. Some of its features are explained and off. later in this section under, “Adjusting the Speakers (Balance/Fade)”.
Page 260: Finding A Station
Finding a Station Storing a Radio Station as a Favorite Drivers are encouraged to set up their radio station BAND: Press to switch between AM, FM, or XM™ favorites while the vehicle is stopped. Tune to favorite (if equipped). The selection displays. stations using the presets, favorites button, and steering wheel controls, if the vehicle has this feature.
Page 261 The number of favorites pages can be setup using clockwise or counterclockwise to adjust the highlighted the MENU button. To setup the number of favorites setting. Adjust the highlighted setting by pressing either pages, perform the following steps: SEEK arrow, FWD (forward), or REV (reverse) button until the desired levels are obtained.
Page 262 Adjusting the Speakers (Balance/Fade) Finding a Category (CAT) Station BAL/FADE (Balance/Fade): To adjust balance or fade, CAT (Category): The CAT button is used to ﬁnd XM™ stations when the radio is in the XM™ mode. To ﬁnd press the knob until the speaker control labels display. XM™...
Page 263: Radio Messages
Radio Messages Undesired XM™ categories can be removed through the setup menu. To remove an undesired category, perform the following: Calibration Error: The audio system has been calibrated for the vehicle from the factory. If Calibration 1. Press the MENU button to display the radio Error displays, it means that the radio has not been setup menu.
Page 264 Radio Messages for XM™ Only To insert multiple CDs, do the following: 1. Press and hold the button for two seconds. See XM Radio Messages on page 3-106 later in this section for further detail. A beep sounds and Load All Discs displays. 2.
Page 265 Playing a CD (In Either the DVD or Care of CDs CD Slot) If playing a CD-R, the sound quality can be reduced due to CD-R or CD-RW quality, the method of recording, the Insert a CD partway into the slot, label side up. The quality of the music that has been recorded, and the way player pulls it in and the CD should begin playing the CD-R or CD-RW has been handled.
Page 266 Care of the CD and DVD Player For the Six-Disc CD player, press and hold for two seconds to eject all discs. Do not add any label to a CD, it could get caught in the CD or DVD player. If a CD is recorded on a personal DVD (Eject): Press and release to eject the computer and a description label is needed, try labeling disc that is currently playing in the top slot.
Page 267 • Press the CD/AUX button, or for a six-disc CD REV (Fast Reverse): Press and hold to reverse playback quickly within a track. Sound is heard at a player, press and hold the button. A beep sounds reduced volume. Release this pushbutton to resume and Load All Discs displays.
Page 268 Radios with CD and DVD Audio Output CD/AUX (CD/Auxiliary): Press to play a CD while listening to the radio. The CD icon and a message Only one audio source can be heard through the showing the disc and/or track number displays when speakers at a time.
Page 269 Playing an MP3 CD-R or CD-RW Disc Player Error: There are disc LOAD or disc EJECT problems. Radios with a Single CD or a Six-Disc CD player have • It is very hot. When the temperature returns to the capability of playing an MP3 CD-R or CD-RW disc. normal, the CD should play.
Page 270: Playing A Dvd
Using the DVD Player Playing a DVD The DVD player is controlled by the buttons on the DVD/CD AUX (Auxiliary): Press this button to cycle remote control, or by the RSA system, or by the buttons through DVD, CD, or Auxiliary when listening to the radio. on the radio faceplate.
Page 271 ¨ (Power): Press to turn the radio on or off. Turn SEEK (Next Track/Chapter): Press the right arrow clockwise or counterclockwise to increase or decrease to go to the next track or chapter. This button might the volume. Press and hold for more than two seconds not work when the DVD is playing the copyright to turn off the radio and Rear Seat Entertainment (RSE) information or the previews.
Page 272 DVD-V (Video) Display Buttons (Stop): Press to stop playing, rewinding, or fast forwarding a DVD. Once a DVD-V is inserted, the radio display menu shows several tag options for DVD playing. Press the (Enter): Press to select the choices that are pushbuttons located under any desired tag option during highlighted in any menu.
Page 273: Inserting A Disc
DVD-A (Audio) Display Buttons Nav (Navigate): Press to display directional arrows for navigating through the menus. Once a DVD-A is inserted, radio display menu shows several tag options for DVD playing. Press the (Audio Stream): Press to cycle through audio pushbuttons located under any desired tag option during stream formats located on the DVD-A disc.
Page 274: Dvd Radio Error Messages
Stopping and Resuming Playback The disc is stored in the radio. The radio does not resume play of the disc automatically. If the RSA system To stop playing a DVD without turning off the system, is sourced to the DVD, the movie when reloaded into press the button on the remote control, or press the the DVD player begins to play again.
Page 275: Using The Auxiliary Input Jack
Using the Auxiliary Input Jack BAND: Press to listen to the radio when a portable audio device is playing. The portable audio device also The radio system has an auxiliary input jack located on continues to play. the lower right side of the faceplate. This is not an CD/AUX (CD/Auxiliary): Press to play a CD when a audio output;...
Page 276: Six-Disc Cd Player)
Using an MP3 (Radio with CD or MP3 Format Six-Disc CD Player) Burning an MP3 disc on a personal computer: • Make sure the MP3 ﬁles are recorded on a CD-R or MP3 CD-R or CD-RW Disc CD-RW disc. • Do not mix standard audio and MP3 ﬁles on The radio plays MP3 ﬁles that were recorded on a CD-R or CD-RW disc.
Page 277 • Root Directory Minimize the length of the ﬁle, folder, or playlist names. Long ﬁle, folder, or playlist names, or a The root directory of the CD-R or CD-RW is treated as a combination of a large number of ﬁles and folders, folder.
Page 278 No Folder File System and Naming When the CD contains only compressed ﬁles, the ﬁles The song name that displays is the song name that is are located under the root folder. The next and previous contained in the ID3 tag. If the song name is not present folder function does not display on a CD that was in the ID3 tag, then the radio displays the ﬁle name recorded without folders or playlists.
Page 279 As each new track starts to play, the track number and REV (Reverse): Press and hold this button to song title displays. reverse playback quickly within an MP3 ﬁle. Sound will be heard at a reduced volume. Release this button EJECT: Press this button to eject CD-R(s) or to resume playing the ﬁle.
Page 280 To change from playback by artist to playback by album, (Music Navigator): Use the music navigator press the pushbutton located below the Sort By label. feature to play MP3 ﬁles on the CD-R or CD-RW in order From the sort screen, push one of the buttons below the by artist or album.
Page 281: Dvd Player)
Using an MP3 (Radio with CD and • Create a folder structure that makes it easy to ﬁnd songs while driving. Organize songs by albums DVD Player) using one folder for each album. Each folder or album should contain 18 songs or less. MP3/WMA CD-R or CD-RW Disc •...
Page 282 Root Directory Order of Play The root directory of the CD-R or CD-RW is treated as a Tracks recorded to the CD-R or CD-RW are played in folder. If the root directory has compressed audio ﬁles, the following order: the directory is displayed as F1 ROOT. All ﬁles contained •...
Page 283 Preprogrammed Playlists As each new track starts to play, the track number and song title displays. Preprogrammed playlists that were created using WinAmp™, MusicMatch™, or Real Jukebox™ software CD (Eject): Press and release this button to eject can be accessed, however, they cannot be edited the CD-R or CD-RW that is currently playing in the bottom using the radio.
Page 284 RDM (Random): With the random setting, MP3/WMA (Tune): Turn this knob to select MP3/WMA ﬁles on ﬁles on the CD-R or CD-RW can be listened to in the CD-R or CD-RW that is currently playing. random, rather than sequential order. To play MP3/WMA ©...
Page 285 Once the disc has been scanned, the player defaults to DVD/CD AUX (Auxiliary): Press this button to cycle playing MP3/WMA ﬁles in order by artist. The current through DVD, CD, or Auxiliary when listening to the radio. artist playing is shown on the second line of the display The DVD/CD text label and a message showing track or between the arrows.
Page 286: Xm Radio Messages
XM Radio Messages No CAT Info: No category information is available at this time on this channel. The system is working properly. XL (Explicit Language Channels): These channels, or any others, can be blocked at a customer’s request, No Information: No text or informational messages are by calling 1-800-852-XMXM (9696).
Page 287: Navigation/Radio System
Navigation/Radio System In severe or extreme weather conditions the RSE system might not work until the temperature is within the operating range. The operating range for the Your vehicle may have a navigation radio system. RSE system is above −4°F (−20°C) or below The navigation system has built-in features intended to 140°F (60°C).
Page 288 Headphones Push the power button to turn on the headphones. An indicator light located on the headphones comes on. If the light comes on but there is intermittent sound and/or static on the headphones, or if the indicator light does not come on, the batteries might need to be replaced.
Page 289 Audio/Video (A/V) Jacks Notice: Do not store the headphones in heat or direct sunlight. This could damage the headphones and repairs will not be covered by your warranty. Storage in extreme cold can weaken the batteries. Keep the headphones stored in a cool, dry place. If the foam ear pads attached to the headphones become worn or damaged, the pads can be replaced separately from the headphone set.
Page 290: Audio Output
Audio Output To use the auxiliary inputs of the RSE system, connect an external auxiliary device to the color-coded A/V jacks Audio from the DVD player or auxiliary inputs can be and turn both the auxiliary device and the video screen heard through the following possible sources: power on.
Page 291: Video Screen
Video Screen Remote Control The video screen is located in the overhead console. To use the remote control, aim it at the transmitter window at the rear of the overhead console and press To use the video screen, do the following: the desired button.
Page 292 Remote Control Buttons (Main Menu): Press this button to access the DVD menu. The DVD menu is different on every DVD. Use the navigation arrows to move the cursor around the DVD menu. After making a selection press the enter button.
Page 293 (Play/Pause): Press this button to start playing a (Fast Forward): Press this button to fast forward DVD. Press this button while a DVD is playing to pause the DVD or CD. To stop fast forwarding a DVD video, it. Press it again to continue playing the DVD. press the play/pause button.
Page 294 (Clear): Press this button within three seconds after Problem Recommended Action entering a numeric selection, to clear all numerical inputs. No power. The ignition might not be turned ON/RUN or in 10 (Double Digit Entries): Press this button to ACC/ACCESSORY. select chapter or track numbers greater than nine.
Page 295: Dvd Display Error Messages
DVD Display Error Messages Problem Recommended Action The auxiliary source is Check that the RSE video The DVD display error message depends on which running but there is no screen is in the auxiliary radio is in the vehicle. The video screen can display one picture or sound.
Page 296: Rear Seat Audio (Rsa)
Cleaning the RSE Overhead Console The RSA functions operate even when the main radio is off. The front audio system will display the headphone When cleaning the RSE overhead console surface, use icon when the RSA is on, and will disappear from only a clean cloth dampened with clean water.
Page 297 © ¨ (Seek): When listening to FM, AM, or XM™ (if equipped), press the seek arrows to go to the previous or to the next station or channels and stay there. This function is inactive, with some radios, if the front seat passengers are listening to the radio.
Page 298: Theft-Deterrent Feature
Audio Steering Wheel Controls PROG (Program): Press this button to go to the next preset radio station or channel set on the main radio. This function is inactive, with some radios, if the Vehicles with audio front seat passengers are listening to the radio. steering wheel controls could differ depending on When a CD or DVD audio disc is playing, press this...
Page 299: Radio Reception
Radio Reception If your vehicle has the navigation system, press and hold this button for longer than one second to initiate voice recognition. See “Voice Recognition” in the Frequency interference and static can occur during Navigation System manual for more information. normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external ®...
Page 300: Fixed Mast Antenna
XM™ Satellite Radio Service XM™ Satellite Radio Antenna System XM™ Satellite Radio Service gives digital radio reception from coast-to-coast in the 48 contiguous The XM™ Satellite Radio antenna is located on the roof United States, and in Canada. Just as with FM, tall of the vehicle.
Page 301: Driving Your Vehicle
Section 4 Driving Your Vehicle Your Driving, the Road, and Your Vehicle ..4-2 Before Leaving on a Long Trip .......4-29 Defensive Driving ...........4-2 Highway Hypnosis ........4-29 Drunk Driving ..........4-2 Hill and Mountain Roads ........4-30 Control of a Vehicle ........4-3 Winter Driving ..........4-31 Braking ............4-3 If Your Vehicle is Stuck in Sand, Mud, Antilock Brake System (ABS) ......4-4...
Page 302: Your Driving, The Road, And Your Vehicle
Your Driving, the Road, and Drunk Driving Your Vehicle CAUTION: Defensive Driving Drinking and then driving is very dangerous. Defensive driving means “always expect the Your reﬂexes, perceptions, attentiveness, and unexpected.” The ﬁrst step in driving defensively is to judgment can be affected by even a small wear your safety belt —...
Page 303: Control Of A Vehicle
Braking For persons under 21, it is against the law in every U.S. state to drink alcohol. There are good medical, psychological, and developmental reasons for See Brake System Warning Light on page 3-39. these laws. Braking action involves perception time and reaction The obvious way to eliminate the leading highway time.
Page 304: Antilock Brake System (Abs)
Antilock Brake System (ABS) Avoid needless heavy braking. Some people drive in spurts — heavy acceleration followed by heavy braking — rather than keeping pace with traffic. This is a Your vehicle has the Antilock Brake System (ABS), mistake. The brakes might not have time to cool between an advanced electronic braking system that will hard stops.
Page 305: Using Abs
Using ABS Let us say the road is wet and you are driving safely. Suddenly, an animal jumps out in front of you. You slam Do not pump the brakes. Just hold the brake pedal on the brakes and continue braking. Here is what down ﬁrmly and let antilock work for you.
Page 306: Stabilitrak System
® ® StabiliTrak System using the StabiliTrak on/off button. Then turn the steering wheel clockwise from the nine o’clock position to ® the three o’clock position. If this clears the message(s), Your vehicle may have the StabiliTrak system which your vehicle does not need servicing. If this does not combines antilock brake, traction and stability control clear the message(s), then turn the vehicle off, wait systems and helps the driver maintain directional control...
Page 307 The traction control disable It is recommended to leave the system on for normal button is located on the driving conditions, but it may be necessary to turn the instrument panel below system off if your vehicle is stuck in sand, mud, ice or the climate controls.
Page 308: Steering
Steering In this mode, engine power is not reduced automatically and the driven wheels can spin more freely. This can cause the brake-traction control to activate constantly. Power Steering Notice: If you allow the wheel(s) of one axle to spin If you lose power steering assist because the engine ®...
Page 309: Steering In Emergencies
Steering in Emergencies Suppose you are steering through a sharp curve. Then you suddenly accelerate. Both control There are times when steering can be more effective systems — steering and acceleration — have to do their than braking. For example, you come over a hill and ﬁnd work where the tires meet the road.
Page 310: Off-Road Recovery
Off-Road Recovery Your right wheels can drop off the edge of a road onto the shoulder while driving. An emergency like this requires close attention and a quick decision. If you are holding the steering wheel at the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing either hand.
Page 311: Passing
Passing Skidding In a skid, a driver can lose control of the vehicle. Passing another vehicle on a two-lane road can be Defensive drivers avoid most skids by taking reasonable dangerous. To reduce the risk of danger while passing: care suited to existing conditions, and by not overdriving •...
Page 312: Off-Road Driving
Off-Road Driving Of course, traction is reduced when water, snow, ice, gravel, or other material is on the road. For safety, you will want to slow down and adjust your driving to This off-road guide is for vehicles that have four-wheel these conditions.
Page 313 Off-road driving involves some new skills. And that is Notice: Operating your vehicle for extended why it is very important that you read this guide. You will periods without the front fascia lower air dam ﬁnd many driving tips and suggestions. These will help installed can cause improper air ﬂow to the engine.
Page 314 Loading Your Vehicle for Off-Road There are some important things to remember about how to load your vehicle. Driving • The heaviest things should be on the load ﬂoor and forward of the rear axle. Put heavier items as far forward as you can.
Page 315: Environmental Concerns
Environmental Concerns Traveling to Remote Areas Off-road driving can provide wholesome and satisfying It makes sense to plan your trip, especially when going recreation. However, it also raises environmental to a remote area. Know the terrain and plan your concerns. We recognize these concerns and urge every route.
Page 316: Scanning The Terrain
Getting Familiar with Off-Road Driving CAUTION: It is a good idea to practice in an area that is safe and close to home before you go into the wilderness. Off-road driving does require some new and different When you are driving off-road, bouncing and skills.
Page 317 Surface Obstacles: Unseen or hidden obstacles can When you drive over bumps, rocks, or other obstacles, be hazardous. A rock, log, hole, rut, or bump can startle the wheels can leave the ground. If this happens, you if you are not prepared for them. Often these even with one or two wheels, you cannot control the obstacles are hidden by grass, bushes, snow, or even vehicle as well or at all.
Page 318: Approaching A Hill
Driving on Off-Road Hills Approaching a Hill Off-road driving often takes you up, down, or across a When you approach a hill, you need to decide if it is hill. Driving safely on hills requires good judgment one of those hills that is just too steep to climb, descend, and an understanding of what your vehicle can and or cross.
Page 319: Driving Uphill
• What is beyond the hill? Is there a cliff, an embankment, a drop-off, a fence? Get out and CAUTION: walk the hill if you do not know. It is the smart way to ﬁnd out. Turning or driving across steep hills can be •...
Page 320 • There are some things you should do if the vehicle Sound the horn as you approach the top of the hill stalls, or is about to stall, and you cannot make it up to let opposing traffic know you are there. the hill: •...
Page 321 There are also some things you must not do if you stall, or are about to stall, when going up a hill: CAUTION: • Never attempt to prevent a stall by shifting into NEUTRAL (N) to rev-up the engine and regain Shifting the transfer case to NEUTRAL forward momentum.
Page 322: Driving Downhill
Driving Downhill If you decide you can go down a hill safely, then try to keep your vehicle headed straight down, and use a When off-roading takes you downhill, you will want to low gear. This way, engine drag can help the brakes and consider a number of things: they will not have to do all the work.
Page 323: Driving Across An Incline
Driving Across an Incline There some things not to do when driving down a hill. These are important because, if you ignore them, Sooner or later, an off-road trail will probably go across you could lose control and have a serious accident: the incline of a hill.
Page 324: Stalling On An Incline
• Stalling on an Incline Surface conditions can be a problem when you drive across a hill. Loose gravel, muddy spots, or even wet grass can cause the tires to slip sideways, downhill. If the vehicle slips sideways, it can hit something that CAUTION: will trip it —...
Page 325 Driving in Mud, Sand, Snow, or Ice When you drive in mud, snow, or sand, the wheels will not get good traction. You cannot accelerate as quickly, turning is more difficult, and you will need longer braking distances. If your vehicle has four-wheel drive, see Four-Wheel Drive on page 2-39 for transfer case mode selection.
Page 326: Driving In Water
Driving in Water Hard packed snow and ice offer the worst tire traction. On these surfaces, it is very easy to lose control. On wet ice, for example, the traction is so poor that you will have difficulty accelerating. And if you do get CAUTION: moving, poor steering and difficult braking can cause you to slide out of control.
Page 327: Driving At Night
Driving at Night If the water is not too deep, drive slowly through it. At faster speeds, water splashes on the ignition system and your vehicle can stall. Stalling can also occur if you get Night driving is more dangerous than day driving the tailpipe under water.
Page 328: Driving In Rain And On Wet Roads
No one can see as well at night as in the daytime. But, as we get older, these differences increase. CAUTION: (Continued) A 50-year-old driver might need at least twice as much light to see the same thing at night as a 20-year-old. Flowing or rushing water creates strong forces.
Page 329: Other Rainy Weather Tips
Other Rainy Weather Tips • Lamps: Do they all work and are lenses clean? • Tires: Are treads good? Are tires inﬂated to Besides slowing down, other wet weather driving tips recommended pressure? include: • • Weather and Maps: Safe to travel? Have up-to-date Allow extra following distance.
Page 330: Hill And Mountain Roads
Hill and Mountain Roads CAUTION: Driving on steep hills or through mountains is different than driving on ﬂat or rolling terrain. Tips for driving in these conditions include: Coasting downhill in NEUTRAL (N) or with the • ignition off is dangerous. The brakes will have Keep your vehicle serviced and in good shape.
Page 331: Winter Driving
Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You might want to put winter emergency supplies in your vehicle. Include an ice scraper, a small brush or broom, a supply of windshield washer ﬂuid, a rag, some winter outer clothing, a small shovel, a ﬂashlight, a red cloth, and a couple of reﬂective warning triangles.
Page 332: If You Are Caught In A Blizzard
® If You Are Caught in a Blizzard StabiliTrak improves your ability to accelerate when ® driving on a slippery road. But you can turn StabiliTrak If you are stopped by heavy snow, you could be in ® off if you ever need to. See StabiliTrak System on a serious situation.
Page 333 CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle.
Page 334: If Your Vehicle Is Stuck In Sand, Mud, Ice, Or Snow
Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine again CAUTION: and repeat this only when you feel really uncomfortable from the cold. But do it as little as possible. Preserve the fuel as long as you can.
Page 335: Recovery Hooks
By slowly spinning the wheels in the forward and reverse directions, you will cause a rocking motion that could free your vehicle. If that does not get your vehicle out after a few tries, it might need to be towed out. Or, you can use recovery hooks, if your vehicle has them.
Page 336: Loading Your Vehicle
Loading Your Vehicle Tire and Loading Information Label It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options.
Page 337 The Tire and Loading Information label also shows The resulting ﬁgure equals the available the size of the original equipment tires (C) and amount of cargo and luggage load capacity. the recommended cold tire inﬂation pressures (D). For example, if the “XXX” amount equals For more information on tires and inﬂation see 1400 lbs and there will be ﬁve 150 lb Tires on page 5-56 and Inﬂation - Tire Pressure...
Page 338 Example 1 Example 2 Item Description Total Item Description Total Vehicle Capacity Vehicle Capacity 1,000 lbs 1,000 lbs Weight for Weight for (453 kg) (453 kg) Example 1 = Example 2 = Subtract Occupant Subtract Occupant Weight 150 lbs 300 lbs (136 kg) Weight 150 lbs 750 lbs (136 kg) (68 kg) ×...
Page 339 The combined weight of the driver, passengers and cargo should never exceed your vehicle’s capacity weight. Certiﬁcation/Tire Label Example 3 Item Description Total Vehicle Capacity 1,000 lbs Weight for (453 kg) Example 3 = Subtract Occupant 1,000 lbs Weight 200 lbs (453 kg) (91 kg) ×...
Page 340 The Certiﬁcation/Tire label also tells you the maximum weights for the front and rear axles, CAUTION: called Gross Axle Weight Rating (GAWR). To ﬁnd out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your Do not load the vehicle any heavier than vehicle.
Page 341: Truck-Camper Loading Information
Add-On Equipment CAUTION: When you carry removable items, you may need to put a limit on how many people you can carry inside your vehicle. Be sure to weigh your vehicle Things you put inside your vehicle can before you buy and install the new equipment. strike and injure people in a sudden stop Notice: Overloading your vehicle may cause or turn, or in a crash.
Page 342: Towing
Towing Here are some important things to consider before you do recreational vehicle towing: • What’s the towing capacity of the towing vehicle? Towing Your Vehicle Be sure you read the tow vehicle manufacturer’s recommendations. To avoid vehicle damage, a platform or ﬂatbed trailer •...
Page 343 Four-Wheel-Drive Vehicles CAUTION: Shifting the transfer case to NEUTRAL can cause your vehicle to roll even if the transmission is in PARK (P). You or someone else could be seriously injured. Be sure to set the parking brake before placing the transfer case in NEUTRAL.
Page 344: Dolly Towing
Dolly Towing Front Towing (Front Wheels Off the CAUTION: Ground) Shifting the transfer case to NEUTRAL Two-Wheel-Drive Vehicles can cause your vehicle to roll even if the Notice: If you tow a two-wheel-drive vehicle with transmission is in PARK (P). You or someone the rear wheels on the ground, the transmission else could be seriously injured.
Page 345 Rear Towing (Rear Wheels Off the Ground) Four-Wheel-Drive Vehicles Use the following procedure to tow your vehicle from Two-Wheel-Drive Vehicles the rear: Use the following procedure to tow your vehicle from 1. Drive the vehicle onto the dolly. the rear: 2.
Page 346: Level Control
Level Control CAUTION: The self-adjusting rear suspension may come as part of the premium smooth ride suspension package. Shifting the transfer case to NEUTRAL This type of level control will provide a leveled riding can cause your vehicle to roll even if the position as well as improved handling under a variety of transmission is in PARK (P).
Page 347: Towing A Trailer
Towing a Trailer Notice: Pulling a trailer improperly can damage your vehicle and result in costly repairs that would not be covered by your warranty. Always follow Do not tow a trailer during break-in. See New Vehicle the instructions in this section and check with your Break-In on page 2-30 for more information.
Page 348: If You Do Decide To Pull A Trailer
If You Do Decide To Pull A Trailer Three important considerations have to do with weight: • the weight of the trailer, If you do, here are some important points: • the weight of the trailer tongue • There are many different laws, including speed limit •...
Page 349 Your vehicle is equipped with a button at the end of the shift lever which, when pressed, enables Tow/Haul. When the button is pressed, a light on the instrument panel will illuminate to indicate that Tow/Haul has been selected. Tow/Haul may be turned off by pressing the button again, at which time the indicator light on the instrument panel will turn off.
Page 350: Weight Of The Trailer
Weight of the Trailer Maximum trailer weight is calculated assuming only the driver is in the tow vehicle and it has all the required How heavy can a trailer safely be? trailering equipment. The weight of additional optional equipment, passengers and cargo in the tow vehicle It depends on how you plan to use your rig.
Page 351: Weight Of The Trailer Tongue
Ask your dealer/retailer for our trailering information or advice, or write us at our Customer Assistance Offices. See Customer Assistance Offices on page 7-5 for more information. Weight of the Trailer Tongue The tongue load (A) of any trailer is an important weight to measure because it affects the total or gross weight of your vehicle.
Page 352 Do not exceed the maximum allowable tongue weight Consider the following example: for your vehicle. Choose the shortest hitch extension A vehicle model base weight is 5,500 lbs (2 495 kg); that will position the hitch ball closest to the vehicle. 2,800 lbs (1 270 kg) at the front axle and 2,700 lbs This will help reduce the effect of trailer tongue weight (1 225 kg) at the rear axle.
Page 353 But let’s say your speciﬁc vehicle is equipped with some 1.5 leaves you with being able to handle only 600 lbs of the latest options and you have a front seat passenger (272 kg) of tongue weight. Since tongue weight is and two rear seat passengers with some luggage and usually at least 10 percent of total loaded trailer weight, gear in the vehicle as well.
Page 354: Safety Chains
Weight-Distributing Hitches and Weight If you’ll be pulling a trailer that, when loaded, will weigh more than 5,000 lbs (2 270 kg) be sure to use a properly Carrying Hitches mounted weight-distributing hitch and sway control of the proper size. This equipment is very important for proper vehicle loading and good handling when driving.
Page 355: Driving With A Trailer
Driving with a Trailer Passing Towing a trailer requires a certain amount of You’ll need more passing distance up ahead when experience. Before setting out for the open road, you’ll you’re towing a trailer. And, because you’re a good want to get to know your rig. Acquaint yourself with the deal longer, you’ll need to go much farther beyond the feel of handling and braking with the added weight of the passed vehicle before you can return to your lane.
Page 356: Turn Signals When Towing A Trailer
Turn Signals When Towing a Trailer You can tow in DRIVE (D). If the transmission shifts too often (e.g., under heavy loads and/or hilly conditions) The arrows on your instrument panel will ﬂash whenever you may want to shift the transmission to a lower you signal a turn or lane change.
Page 357: Parking On Hills
Parking on Hills CAUTION: CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the You really should not park your vehicle, with a parking brake ﬁrmly set. Your vehicle can roll. trailer attached, on a hill.
Page 358 When You Are Ready to Leave After Maintenance When Trailer Towing Parking on a Hill Your vehicle will need service more often when you’re pulling a trailer. See the Maintenance Schedule for more 1. Apply your regular brakes and hold the pedal down on this.
Page 359: Trailer Wiring Harness
Trailer Wiring Harness The seven-wire harness contains the following trailer circuits: Heavy-Duty Trailer Wiring Package • Yellow: Left Stop/Turn Signal • Dark Green: Right Stop/Turn Signal • Brown: Taillamps • White: Ground • Light Green: Back-up Lamps • Red: Battery Feed* •...
Page 360: Trailer Recommendations
Electric Brake Control Wiring Trailer Recommendations Provisions You must subtract your hitch loads from the Cargo Weight Rating (CWR). CWR is the maximum weight These wiring provisions are included with your vehicle of the load your vehicle can carry. It doesn’t include the as part of the heavy-duty trailer wiring package.
Page 361: Service And Appearance Care
Section 5 Service and Appearance Care Service ............5-3 Overheated Engine Protection Accessories and Modiﬁcations ......5-3 Operating Mode ........5-30 California Proposition 65 Warning .....5-4 Cooling System ..........5-31 California Perchlorate Materials Requirements ..5-4 Engine Fan Noise .........5-35 Doing Your Own Service Work ......5-4 Power Steering Fluid ........5-36 Adding Equipment to the Outside of Windshield Washer Fluid ........5-37...
Page 362 Section 5 Service and Appearance Care Tire Pressure Monitor System ......5-65 Weatherstrips ..........5-102 Tire Pressure Monitor Operation .....5-67 Washing Your Vehicle ........5-102 Tire Inspection and Rotation ......5-70 Cleaning Exterior Lamps/Lenses ....5-103 When It Is Time for New Tires .......5-71 Finish Care ..........5-103 Buying New Tires .........5-72 Windshield and Wiper Blades .......5-104 Different Size Tires and Wheels ......5-74...
Page 363: Service
Service Accessories and Modiﬁcations When non-dealer/non-retailer accessories are added to For service and parts needs, visit your dealer/retailer. your vehicle they can affect your vehicle’s performance You will receive genuine GM parts and GM-trained and and safety, including such things as, airbags, braking, supported service people.
Page 364: California Proposition 65 Warning
California Proposition 65 Warning Doing Your Own Service Work Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause CAUTION: cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems (including some inside the vehicle), many ﬂuids, and some You can be injured and your vehicle could be component wear by-products contain and/or emit...
Page 365: Adding Equipment To The Outside Of Your Vehicle
You should keep a record with all parts receipts and The 8th digit of the Vehicle Identiﬁcation Number (VIN) list the mileage and the date of any service work shows the code letter or number that identiﬁes your you perform. See Maintenance Record on page 6-17. vehicle’s engine.
Page 366: Gasoline Speciﬁcations
Gasoline Speciﬁcations Additives At a minimum, gasoline should meet ASTM To provide cleaner air, all gasolines in the United States speciﬁcation D 4814 in the United States or are now required to contain additives that help prevent CAN/CGSB-3.5 or 3.511 in Canada. Some gasolines engine and fuel system deposits from forming, allowing contain an octane-enhancing additive called the emission control system to work properly.
Page 367 Notice: Your vehicle was not designed for fuel If your vehicle has the 5.3L V8 engine (Code 0) or the that contains methanol. Do not use fuel containing 5.3L V8 engine (Code 3), you can use either regular methanol. It can corrode metal parts in the fuel unleaded gasoline or ethanol fuel containing up to 85% system and also damage plastic and rubber parts.
Page 368: Fuels In Foreign Countries
To ensure quick starts in the wintertime, the E85 fuel Notice: Some additives are not compatible with must be formulated properly for your climate according to E85 fuel and can harm your vehicle’s fuel system. ASTM speciﬁcation D 5798. If you have trouble starting Do not add anything to E85.
Page 369: Filling The Tank
Filling the Tank CAUTION: Fuel vapor burns violently and a fuel ﬁre can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling. Do not smoke if you are near fuel or refueling your vehicle.
Page 370 To remove the fuel cap, turn it slowly counterclockwise. Be careful not to spill fuel. Do not top off or overﬁll the It will require more effort to turn the fuel cap on the tank and wait a few seconds after you have ﬁnished last turn as you loosen it.
Page 371: Filling A Portable Fuel Container
Filling a Portable Fuel Container CAUTION: CAUTION: If a ﬁre starts while you are refueling, do not remove the nozzle. Shut off the ﬂow of fuel by Never ﬁll a portable fuel container while it is in shutting off the pump or by notifying the your vehicle.
Page 372: Hood Release
Checking Things Under Hood Release the Hood To open the hood do the following: 1. Pull the handle with this symbol on it. It is CAUTION: located inside the vehicle to the lower left of the steering wheel. An electric fan under the hood can start up and injure you even when the engine is not running.
Page 373 3. Push the secondary hood release to the right. 4. Lift the hood. Before closing the hood, be sure all the ﬁller caps are on properly. Then bring the hood from full open to within 6 inches (152 mm) from the closed position, pause, then push the front center of the hood with a swift, ﬁrm motion to fully close the hood.
Page 374: Engine Compartment Overview
Engine Compartment Overview When you open the hood on the 5.3L engine (6.0L similar), here is what you will see: 5-14...
Page 375: Engine Oil
A. Engine Air Cleaner/Filter. See Engine Air L. Brake Master Cylinder Reservoir. See “Brake Fluid” Cleaner/Filter on page 5-20. under Brakes on page 5-38. B. Air Filter Restriction Indicator (If Equipped). M. Underhood Fuse Block. See Underhood Fuse Block See Engine Air Cleaner/Filter on page 5-20. on page 5-111.
Page 376: When To Add Engine Oil
When to Add Engine Oil See Engine Compartment Overview on page 5-14 for the location of the engine oil ﬁll cap. If the oil is below the cross-hatched area at the tip of the dipstick, add at least one quart/liter of the Be sure to add enough oil to put the level somewhere in recommended oil.
Page 377: What Kind Of Engine Oil To Use
What Kind of Engine Oil to Use These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50. • Oils meeting these requirements should have the starburst symbol on the container. This symbol indicates that the oil has been certiﬁed by the...
Page 378: Engine Oil Additives
If you are in an area of extreme cold, where When the system has calculated that oil life has been the temperature falls below −20°F (−29°C), it is diminished, it will indicate that an oil change is necessary. recommended that you use either an SAE 5W-30 A CHANGE ENGINE OIL SOON message will come on.
Page 379: How To Reset The Engine Oil Life System
How to Reset the Engine Oil Life What to Do with Used Oil System Used engine oil contains certain elements that can be unhealthy for your skin and could even cause cancer. The Engine Oil Life System calculates when to change Do not let used oil stay on your skin for very long.
Page 380: Engine Air Cleaner/Filter
Engine Air Cleaner/Filter On vehicles without an air ﬁlter restriction indicator, inspect the air cleaner/ﬁlter at the Maintenance II intervals and replace it at the ﬁrst oil change after See Engine Compartment each 50,000 mile (80 000 km) interval. See Scheduled Overview on page 5-14 for Maintenance on page 6-4 for more information.
Page 381 Replacing the Engine Air Cleaner/Filter and Resetting the Air Filter Restriction Indicator 1. Locate the air cleaner/ ﬁlter assembly. See Engine Compartment Overview on page 5-14. 3. Remove the engine air cleaner/ﬁlter from the housing. Care should be taken to dislodge as little dirt as possible.
Page 382: Automatic Transmission Fluid
Automatic Transmission Fluid 4. Clean the engine air cleaner/ﬁlter sealing surfaces and the housing. When to Check and Change Automatic 5. Inspect or replace the engine air cleaner/ﬁlter. Transmission Fluid 6. Reinstall the cover and tighten the screws. 7. Reset the air ﬁlter restriction indicator, if the vehicle A good time to check your automatic transmission ﬂuid has one, by pressing the top button on the indicator.
Page 383: Checking The Fluid Level
Checking the Fluid Level Wait at least 30 minutes before checking the transmission ﬂuid level if you have been driving: Prepare your vehicle as follows: • When outside temperatures are above 90°F (32°C). 1. Park your vehicle on a level place. Keep the engine •...
Page 384 Then, without shutting off the engine, follow these steps: The transmission dipstick handle with this graphic is located at the rear of the engine compartment, on the passenger’s side of the vehicle. See Engine Compartment Overview on page 5-14 for more information on location.
Page 385: Engine Coolant
How to Add Automatic Transmission Engine Coolant Fluid The cooling system in your vehicle is ﬁlled with ® DEX-COOL engine coolant. This coolant is designed Refer to the Maintenance Schedule to determine what to remain in your vehicle for ﬁve years or 150,000 miles kind of transmission ﬂuid to use.
Page 386: What To Use
What to Use Notice: If you use an improper coolant mixture, your engine could overheat and be badly damaged. Use a mixture of one-half clean, drinkable water and The repair cost would not be covered by your ® one-half DEX-COOL coolant which will not damage warranty.
Page 387: Checking Coolant
Checking Coolant CAUTION: Turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly. Never turn the surge tank pressure cap — even a little — when the engine and radiator are hot.
Page 388: Adding Coolant
Adding Coolant Coolant Surge Tank Pressure Cap ® If more coolant is needed, add the proper DEX-COOL Notice: If the pressure cap is not tightly installed, coolant mixture at the surge tank, but only when the coolant loss and possible engine damage may engine is cool.
Page 389: If Steam Is Coming From Your Engine
If Steam Is Coming From Your Engine Notice: If your engine catches ﬁre because you keep driving with no coolant, your vehicle can be badly damaged. The costly repairs would not be covered by your warranty. See Overheated Engine CAUTION: Protection Operating Mode on page 5-30 for information on driving to a safe place in an emergency.
Page 390: Overheated Engine Protection
If you get the ENGINE OVERHEATED STOP ENGINE If you still have the warning, turn off the engine and get or the ENGINE OVERHEATED IDLE ENGINE message everyone out of the vehicle until it cools down. Also, with no sign of steam, try this for a minute or so: see “Overheated Engine Protection Operating Mode”...
Page 391: Cooling System
Cooling System CAUTION: When you decide it is safe to lift the hood, here is what you will see: An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing, and tools away from any underhood electric fan.
Page 392 CAUTION: Heater and radiator hoses, and other engine parts, can be very hot. Do not touch them. If you do, you can be burned. Do not run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine ﬁre, and you could be burned.
Page 393: How To Add Coolant To The Coolant Surge Tank
How to Add Coolant to the Coolant Surge Tank CAUTION: If you have not found a problem yet, check to see if coolant is visible in the surge tank. If coolant is visible Adding only plain water to the cooling system but the coolant level is not at or above the FULL COLD can be dangerous.
Page 394 2. Then keep turning the pressure cap slowly, and remove it. CAUTION: You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. 1.
Page 395: Engine Fan Noise
5. Then replace the pressure cap. Be sure the pressure cap is hand-tight and fully seated. 6. Verify coolant level after engine is shut off and the coolant is cold. If necessary, repeat coolant ﬁll procedure steps 1 through 6. Engine Fan Noise Your vehicle has electric cooling fans.
Page 396: Power Steering Fluid
Power Steering Fluid How to Check Power Steering Fluid To check the power steering ﬂuid, do the following: See Engine Compartment 1. Turn the key off and let the engine compartment Overview on page 5-14 for cool down. reservoir location. 2.
Page 397: Windshield Washer Fluid
Windshield Washer Fluid Notice: • When using concentrated washer ﬂuid, follow What to Use the manufacturer’s instructions for adding water. When windshield washer ﬂuid needs to be added, be • Do not mix water with ready-to-use washer ﬂuid. sure to read the manufacturer’s instructions before use. Water can cause the solution to freeze and Use a ﬂuid that has sufficient protection against freezing damage your washer ﬂuid tank and other parts...
Page 398: Brakes
Brakes It is not a good idea to top off the brake ﬂuid. Adding brake ﬂuid will not correct a leak. If ﬂuid is added when the linings are worn, there will be too much ﬂuid when Brake Fluid new brake linings are installed. Add or remove brake ﬂuid, as necessary, only when work is done on the brake The brake master cylinder hydraulic system.
Page 399 Checking Brake Fluid Always clean the brake ﬂuid reservoir cap and the area around the cap before removing it. This helps keep The brake ﬂuid can be checked without taking off the dirt from entering the reservoir. cap by looking at the brake ﬂuid reservoir. The ﬂuid level should be CAUTION: above MIN.
Page 400: Brake Wear
Brake Wear Some driving conditions or climates can cause a brake squeal when the brakes are ﬁrst applied or lightly applied. Your vehicle has disc brakes. Disc brake pads have This does not mean something is wrong with the brakes. built-in wear indicators that make a high-pitched warning Properly torqued wheel nuts are necessary to help sound when the brake pads are worn and new pads...
Page 401: Battery
Replacing Brake System Parts Vehicle Storage The braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if CAUTION: the vehicle is to have really good braking. Your vehicle was designed and tested with top-quality brake parts. When you replace parts of the braking system —...
Page 402: Jump Starting
Jump Starting Notice: Ignoring these steps could result in costly damage to your vehicle that would not be covered by your warranty. If your vehicle’s battery (or batteries) has run down, you may want to use another vehicle and some jumper Trying to start your vehicle by pushing or pulling it cables to start your vehicle.
Page 403 Notice: If you leave your radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by your warranty. Always turn off your radio and other accessories when jump starting your vehicle. 3.
Page 404 CAUTION: (Continued) CAUTION: caps, be sure the right amount of ﬂuid is there. An electric fan can start up even when the If it is low, add water to take care of that ﬁrst. engine is not running and can injure you. If you do not, explosive gas could be present.
Page 405 5. Check that the jumper cables do not have loose 7. Do not let the other end touch metal. Connect it to or missing insulation. If they do, you could get a the positive (+) terminal of the good battery. Use a shock.
Page 406 Notice: If the jumper cables are connected or To disconnect the jumper cables from both vehicles do removed in the wrong order, electrical shorting may the following: occur and damage the vehicle. The repairs would 1. Disconnect the black negative (−) cable from the not be covered by your warranty.
Page 407: Rear Axle
Rear Axle How to Check Lubricant When to Check Lubricant It is not necessary to regularly check rear axle ﬂuid unless you suspect there is a leak or you hear an unusual noise. A ﬂuid loss could indicate a problem. Have it inspected and repaired.
Page 408: Four-Wheel Drive
What to Use How to Check Lubricant Refer to the Maintenance Schedule to determine what kind of lubricant to use. See Recommended Fluids and Lubricants on page 6-13. Four-Wheel Drive Lubricant checks in this section also apply to these vehicles. There are two additional systems that need lubrication.
Page 409: Front Axle
When to Change Lubricant Refer to the Maintenance Schedule to determine how often to change the lubricant. See Scheduled Maintenance on page 6-4. What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See Recommended Fluids and Lubricants on page 6-13.
Page 410: Headlamp Aiming
Headlamp Aiming The vehicle should: • Be placed so the headlamps are 25 ft. (7.6 m) from The vehicle has a visual optical headlamp aiming a light colored wall. system. The aim of the headlamps have been preset at • Have all four tires on a level surface which is level the factory and should need no further adjustment.
Page 411 To adjust the vertical aim: 1. Open the hood. See Hood Release on page 5-12 for more information. 4. At a wall measure from the ground upward (A) to the recorded distance from Step 3 and mark it. 5. Draw or tape a horizontal line (B) on the wall or ﬂat surface the width of the vehicle at the height of the mark in Step 4.
Page 412 9. Make sure that the light from the headlamp is positioned at the bottom edge of the horizontal tape line. The lamp on the left (A) shows the correct headlamp aim. The lamp on the right (B) shows 7. Locate the vertical headlamp aiming screws, which the incorrect headlamp aim.
Page 413: Bulb Replacement
Bulb Replacement Taillamps, Turn Signal, Sidemarker, Stoplamps and Back-up Lamps For the proper type of replacement bulbs, see Replacement Bulbs on page 5-55. A. Stoplamp/Turn Signal/Taillamp For any bulb changing procedure not listed in this section, contact your dealer/retailer. B. Back-up Lamp C.
Page 414: License Plate Lamp
To replace one of these bulbs, do the following: 6. Press a new bulb into the bulb socket and insert the bulb socket into the taillamp assembly. Turn 1. Open the tailgate. See Tailgate on page 2-22 for the bulb socket clockwise into the taillamp assembly more information.
Page 415: Replacement Bulbs
Windshield Wiper Blade 3. Pull the old bulb from the bulb socket, keeping the bulb straight as you pull it out. Replacement 4. Install the new bulb. 5. Reverse Steps 1 through 3 to reinstall the bulb Windshield wiper blades should be inspected for wear socket.
Page 416: Tires
CAUTION: Poorly maintained and improperly used tires are dangerous. • Overloading your vehicle’s tires can cause overheating as a result of too much ﬂexing. You could have an air-out and a serious accident. See Loading Your Vehicle on page 4-36. •...
Page 417: Tire Sidewall Labeling
20-Inch Tires If your vehicle has the optional 20-inch P275/55R20 size tires, they are classiﬁed as touring tires and are designed for on road use. The low-proﬁle, wide tread design is not recommended for off-road driving. See Off-Road Driving on page 4-12, for additional information. Tire Sidewall Labeling Useful information about a tire is molded into the sidewall.
Page 418 (B) TPC Spec (Tire Performance Criteria (G) Maximum Cold Inﬂation Load Limit Speciﬁcation) Original equipment tires designed Maximum load that can be carried and the to GM’s speciﬁc tire performance criteria have maximum pressure needed to support that load. a TPC speciﬁcation code molded onto the sidewall. For information on recommended tire pressure see GM’s TPC speciﬁcations meet or exceed all Inﬂation - Tire Pressure on page 5-64 and Loading...
Page 419 (B) TPC Spec (Tire Performance Criteria (E) Tire Identiﬁcation Number (TIN) The letters Speciﬁcation) Original equipment tires designed and numbers following DOT code are the Tire to GM’s speciﬁc tire performance criteria have Identiﬁcation Number (TIN). The TIN shows the a TPC speciﬁcation code molded onto the sidewall.
Page 420 Tire Size (A) Light Truck (LT-Metric) Tire The United States version of a metric tire sizing system. The following examples show the different parts of The letters LT as the ﬁrst two characters in the a tire size. tire size means a light truck tire engineered to standards set by the U.S.
Page 421: Tire Terminology And Deﬁnitions
Tire Terminology and Deﬁnitions Cold Tire Pressure The amount of air pressure in a tire, measured in pounds per square inch (psi) or kilopascals (kPa) before a tire has built up heat Air Pressure The amount of air inside the from driving.
Page 422 GAWR RR Gross Axle Weight Rating for the rear Normal Occupant Weight The number of axle. See Loading Your Vehicle on page 4-36. occupants a vehicle is designed to seat multiplied by 150 lbs (68 kg). See Loading Your Vehicle Intended Outboard Sidewall The side of on page 4-36.
Page 423 Radial Ply Tire A pneumatic tire in which UTQGS (Uniform Tire Quality Grading the ply cords that extend to the beads are laid Standards) A tire information system that at 90 degrees to the centerline of the tread. provides consumers with ratings for a tire’s traction, temperature, and treadwear.
Page 424: Inﬂation - Tire Pressure
Inﬂation - Tire Pressure A vehicle speciﬁc Tire and Loading Information label is attached to your vehicle. This label shows your vehicle’s original equipment tires and the Tires need the correct amount of air pressure to correct inﬂation pressures for your tires when they operate effectively.
Page 425: How To Check
How to Check Tire Pressure Monitor System Use a good quality pocket-type gage to check tire The Tire Pressure Monitor System (TPMS) uses radio pressure. You cannot tell if your tires are properly and sensor technology to check tire pressure levels. inﬂated simply by looking at them.
Page 426 Federal Communications Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to Commission (FCC) and Industry and maintain correct tire pressure, even if under-inﬂation Science Canada has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
Page 427: Tire Pressure Monitor Operation
Tire Pressure Monitor Operation driver. For additional information and details about the DIC operation and displays see DIC Operation and Displays (With DIC Buttons) on page 3-51 or DIC The Tire Pressure Monitor System (TPMS) is designed Operation and Displays (Without DIC Buttons) on to warn the driver when a low tire pressure condition page 3-56 and DIC Warnings and Messages on exists.
Page 428: Tpms Malfunction Light And Message
TPMS Malfunction Light and Message • One or more TPMS sensors are missing or damaged. The DIC message and the TPMS The TPMS will not function properly if one or more of malfunction light should go off when the TPMS the TPMS sensors are missing or inoperable.
Page 429: Tpms Sensor Matching Process
TPMS Sensor Matching Process The TPMS sensor matching process is outlined below: 1. Set the parking brake. Each TPMS sensor has a unique identiﬁcation code. 2. Turn the ignition switch to ON/RUN with the Any time you rotate your vehicle’s tires or replace one or more of the TPMS sensors, the identiﬁcation codes will engine off.
Page 430: Tire Inspection And Rotation
8. Proceed to the driver side rear tire, and repeat the Any time you notice unusual wear, rotate your procedure in Step 5. The horn sounds two times to tires as soon as possible and check wheel indicate the sensor identiﬁcation code has been alignment.
Page 431: When It Is Time For New Tires
When It Is Time for New Tires Make certain that all wheel nuts are properly tightened. See “Wheel Nut Torque” under Capacities and Speciﬁcations on page 5-115. Various factors, such as maintenance, temperatures, driving speeds, vehicle loading, and road conditions, inﬂuence when you need new tires.
Page 432: Buying New Tires
Buying New Tires You need new tires if any of the following statements are true: GM has developed and matched speciﬁc tires for your • You can see the indicators at three or more places vehicle. The original equipment tires installed on around the tire.
Page 433 CAUTION: CAUTION: Mixing tires could cause you to lose control If you use bias-ply tires on your vehicle, the wheel rim ﬂanges could develop while driving. If you mix tires of different sizes, cracks after many miles of driving. A tire brands, or types (radial and bias-belted tires), and/or wheel could fail suddenly, causing the vehicle might not handle properly, and you...
Page 434: Different Size Tires And Wheels
Different Size Tires and Wheels Uniform Tire Quality Grading If you add wheels or tires that are a different size than Quality grades can be found where applicable your original equipment wheels and tires, this could on the tire sidewall between tread shoulder affect the way your vehicle performs, including its and maximum section width.
Page 435 Treadwear Temperature – A, B, C The treadwear grade is a comparative rating The temperature grades are A (the highest), B, based on the wear rate of the tire when tested and C, representing the tire’s resistance to the under controlled conditions on a speciﬁed generation of heat and its ability to dissipate heat government test course.
Page 436: Wheel Alignment And Tire Balance
Wheel Alignment and Tire Balance Wheel Replacement The tires and wheels on your vehicle were aligned and Replace any wheel that is bent, cracked, or badly rusted balanced carefully at the factory to give you the longest or corroded. If wheel nuts keep coming loose, the wheel, tire life and best overall performance.
Page 437: Used Replacement Wheels
Used Replacement Wheels CAUTION: CAUTION: Using the wrong replacement wheels, wheel bolts, or wheel nuts on your vehicle can be Putting a used wheel on the vehicle is dangerous. It could affect the braking and dangerous. You cannot know how it has been handling of your vehicle, make your tires lose used or how far it has been driven.
Page 438: Tire Chains
Tire Chains CAUTION: (Continued) CAUTION: instructions. To help avoid damage to your vehicle, drive slowly, readjust or remove the device if it is contacting your vehicle, and do If your vehicle has P265/65R18 or P275/55R20 not spin your vehicle’s wheels. size tires, do not use tire chains.
Page 439: If A Tire Goes Flat
If a Tire Goes Flat CAUTION: It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle’s tires properly. If air goes out of a tire, it is much more likely to leak out Lifting a vehicle and getting under it to do slowly.
Page 440: Changing A Flat Tire
Changing a Flat Tire CAUTION: (Continued) If a tire goes ﬂat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your hazard 5. Do not allow passengers to remain in the warning ﬂashers. See Hazard Warning Flashers on vehicle.
Page 441: Removing The Spare Tire And Tools
Removing the Spare Tire and Tools The jack and the wheel blocks are located under a cover near the passenger side rear seat. Rear Seat (Passenger Side) Jack Cover 1. Remove the jack cover by turning the two wing nuts A.
Page 442 3. Remove the wheel blocks (A) attached To access the spare tire: to the jack (E) by turning the wing nut (C) counterclockwise. Place the wheel blocks where needed as indicated in previously in this section. The tools for changing a ﬂat tire are located in the passenger’s side top-box storage unit.
Page 443 4. Insert the open end of the extension (F) through the hole in the rear bumper (G) (hoist shaft access hole). 3. Assemble the two jack handle extensions (I) and wheel wrench (H) as shown. Be sure the hoist end (F) of the extension connects to the hoist shaft (E).
Page 444 6. Use the wheel wrench hook that allows you to pull the hoist cable towards you, to assist in reaching the spare tire. 7. Tilt the tire with slack in the cable to access the tire/wheel retainer (D). Separate the retainer from the guide pin by sliding the retainer up the pin while pressing down on the latch.
Page 445: Removing The Flat Tire And Installing The Spare Tire
Removing the Flat Tire and 2. If the vehicle has a center cap, place the Installing the Spare Tire chiseled end of the wheel wrench in the slot Use the following pictures and instructions to remove on the wheel and gently the ﬂat tire and raise the vehicle.
Page 446 3. Use the wheel wrench to loosen CAUTION: all the wheel nuts. Turn the wheel wrench counterclockwise to Getting under a vehicle when it is jacked up is loosen the wheel nuts. dangerous. If the vehicle slips off the jack, you Do not remove the could be badly injured or killed.
Page 447 Front Position Rear Position Front Tire Flat: If the ﬂat tire is on a front tire of the Rear Tire Flat: If the ﬂat tire is on a rear tire of the vehicle, you will need to use the jack handle and only vehicle, you will need to use the jack handle (B) and one jack handle extension.
Page 448 5. Remove all the wheel nuts. CAUTION: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle.
Page 449 7. Remove any rust or dirt from the wheel bolts, CAUTION: mounting surfaces, and spare wheel. Never use oil or grease on studs or nuts. Because the nuts might come loose. The vehicle’s wheel could fall off, causing a crash. 9.
Page 450 12. Tighten the nuts ﬁrmly in a crisscross CAUTION: sequence as shown by turning the wheel wrench Incorrect or improperly tightened wheel nuts clockwise. can cause the wheel to come loose and even come off. This could lead to a crash. If you have to replace them, be sure to get new original equipment wheel nuts.
Page 451: Secondary Latch System
Secondary Latch System To release the spare tire from the secondary latch: 1. Check under the Your vehicle has an underbody-mounted tire hoist vehicle to see if the assembly equipped with a secondary latch system. cable end is visible. It is designed to stop the spare tire from suddenly falling If the cable is not off your vehicle.
Page 452 5. If the spare does not lower, turn the wrench counterclockwise until approximately 6 inches (15 cm) of cable is exposed. 6. Stand the wheel blocks on their shortest ends, with the backs facing each other. 7. Place the bottom edge of the jack (A) on the wheel blocks (B), separating them so that...
Page 453 CAUTION: Someone standing too close during the procedure could be injured by the jack. If the spare tire does not slide off the jack completely, make sure no one is behind you or on either side of you as you pull the jack out from under the spare.
Page 454: Storing A Flat Or Spare Tire And Tools
Storing a Flat or Spare Tire and Tools CAUTION: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. 14.
Page 455 A. Spare Tire/Flat F. Hoist End of Tire (Valve Stem Extension Tool Pointed Down) G. Hoist Shaft Access Hole B. Hoist Assembly H. Wheel Wrench C. Hoist Cable I. Jack Handle D. Tire/Wheel Retainer Extension(s) 2. Tilt the tire. Separate the tire/wheel retainer (D) E.
Page 456 Make sure the retainer is fully seated across the 4. Insert the open end underside of the wheel. of the extension (F) through the hole in the rear bumper (G) (hoist shaft access hole). 5. Raise the tire part way upward. Make sure the 3.
Page 457 8. Reinstall the spare tire lock. 9. Close the hoist shaft access cover. To store the tools, follow these steps: 1. Return the tools to the tool bag and place it back in the top-box storage unit. 2. Assemble the wheel blocks and jack together with the wing nut by reversing Step 2 under Removing the Spare Tire and Tools on page 5-81 3.
Page 458: Spare Tire
Spare Tire Your vehicle may have a different size spare tire than the road tires originally installed on your vehicle. This spare tire was developed for use on your vehicle, Your vehicle, when new, had a fully-inﬂated spare so it is all right to drive on it. If your vehicle has tire.
Page 459: Appearance Care
Appearance Care Notice: If you use abrasive cleaners when cleaning glass surfaces on your vehicle, you could scratch the glass and/or cause damage to the rear window Interior Cleaning defogger. When cleaning the glass on your vehicle, use only a soft cloth and glass cleaner. Your vehicle’s interior will continue to look its best if it is Many cleaners contain solvents that may become cleaned often.
Page 460: Fabric/Carpet
Fabric/Carpet Do not clean your vehicle using: • A knife or any other sharp object to remove a soil Use a vacuum cleaner with a soft brush attachment from any interior surface. frequently to remove dust and loose dirt. A canister •...
Page 461: Leather
Instrument Panel, Vinyl, and Other If any of the soil remains, a commercial fabric cleaner or spot lifter may be necessary. When a commercial Plastic Surfaces upholstery cleaner or spot lifter is to be used, test a small hidden area for colorfastness ﬁrst. If the locally A soft cloth dampened with water may be used to cleaned area gives any impression that a ring remove dust.
Page 462: Care Of Safety Belts
Care of Safety Belts Washing Your Vehicle The best way to preserve your vehicle’s ﬁnish is to keep Keep belts clean and dry. it clean by washing it often. Notice: Certain cleaners contain chemicals that can CAUTION: damage the emblems or nameplates on your vehicle. Check the cleaning product label.
Page 463: Cleaning Exterior Lamps/Lenses
Cleaning Exterior Lamps/Lenses Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, etc., can Use only lukewarm or cold water, a soft cloth and a damage your vehicle’s ﬁnish if they remain on painted car washing soap to clean exterior lamps and lenses.
Page 464: Windshield And Wiper Blades
Windshield and Wiper Blades Notice: Chrome wheels and other chrome trim may be damaged if you do not wash your vehicle after driving on roads that have been sprayed with Clean the outside of the windshield with glass cleaner. magnesium, calcium or sodium chloride. These Clean the rubber blades using a lint free cloth or paper chlorides are used on roads for conditions such as towel soaked with windshield washer ﬂuid or a mild...
Page 465: Tires
Finish Damage Notice: If you drive your vehicle through an automatic car wash that has silicone carbide tire cleaning brushes, you could damage the aluminum Any stone chips, fractures or deep scratches in the or chrome-plated wheels. The repairs would not ﬁnish should be repaired right away.
Page 466: Chemical Paint Spotting
Chemical Paint Spotting Description Usage Removes dirt, grime, Some weather and atmospheric conditions can create a Glass Cleaner smoke and ﬁngerprints. chemical fallout. Airborne pollutants can fall upon and Removes dirt and grime attack painted surfaces on the vehicle. This damage can Chrome Wheel Cleaner from chrome wheels.
Page 467: Vehicle Identiﬁcation
Vehicle Identiﬁcation Engine Identiﬁcation The eighth character in the VIN is the engine code. This code helps identify the vehicle’s engine, Vehicle Identiﬁcation Number (VIN) speciﬁcations, and replacement parts. See “Engine Speciﬁcations” under Capacities and Speciﬁcations on page 5-115 for your vehicle’s engine code. Service Parts Identiﬁcation Label This label is on the inside of the glove box.
Page 468: Electrical System
Electrical System Power Windows and Other Power Options Add-On Electrical Equipment Circuit breakers protect the power windows and other power accessories. If the current load is too heavy, Notice: Do not add anything electrical to your the circuit breaker opens and then closes after a cool vehicle unless you check with your dealer/retailer down period, protecting the circuit until the problem ﬁrst.
Page 469: Instrument Panel Fuse Block
Instrument Panel Fuse Block Fuses Usage Dome Lamps, Driver Side Turn The instrument panel fuse block access door is located Signal on the driver side edge of the instrument panel. Driver Side Turn Signal, Stoplamp Instrument Panel Back Lighting Passenger Side Turn Signal, Stoplamp Passenger Door Module Power Door Lock 2 (Unlock Feature)
Page 470: Center Instrument Panel Fuse Block
Center Instrument Panel Fuse Block Fuses Usage Ultrasonic Rear Parking Assist, The center instrument panel fuse block is located Power Liftgate underneath the instrument panel, to the left of the steering column. Power Door Lock 1 (Lock Feature) Top View Driver Information Center (DIC) Rear Wiper Not Used...
Page 471: Underhood Fuse Block
Underhood Fuse Block Harness Usage Connector BODY 3 Body Harness Connector 3 HEADLINER 3 Headliner Harness Connector 3 HEADLINER 2 Headliner Harness Connector 2 HEADLINER 1 Headliner Harness Connector 1 Special Equipment Option Upﬁtter SEO/UPFITTER Harness Connector Circuit Breaker Usage Passenger Side Power Window Circuit Breaker Passenger Seat Circuit Breaker...
Page 472 Fuses Usage Trailer Brake Controller Front Washer Oxygen Sensors Antilock Brakes System 2 Trailer Back-up Lamps Driver Side Low-Beam Headlamp Engine Control Module (Battery) Fuel Injectors, Ignition Coils (Right Side) Transmission Control Module (Battery) Vehicle Back-up Lamps Passenger Side Low-Beam Fuses Usage Headlamp...
Page 473 Fuses Usage Fuses Usage Fuel Injectors, Ignition Coils Audio System (Left Side) Miscellaneous (Ignition), Trailer Park Lamps Cruise Control Driver Side Park Lamps Liftgate Release Passenger Side Park Lamps Airbag System (Battery) Fog Lamps Instrument Panel Cluster Horn Power Take-Off Passenger Side High-Beam Auxiliary Climate Control (Ignition), Headlamp...
Page 474 J-Case Fuses Usage Relays Usage Cooling Fan 1 FAN HI Cooling Fan High Speed Automatic Level Control Compressor FAN LO Cooling Fan Low Speed Heavy Duty Antilock Brake System FAN CNTRL Cooling Fan Control Cooling Fan 2 HDLP LO/HID Low-Beam Headlamp Antilock Brake System 1 FOG LAMP Front Fog Lamps...
Page 475: Capacities And Speciﬁcations
Capacities and Speciﬁcations The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 6-13 for more information. Capacities Application English Metric For the air conditioning system refrigerant charge amount, see the refrigerant caution label located Air Conditioning Refrigerant R134a under the hood.
Page 476 Engine Speciﬁcations Engine VIN Code Transmission Spark Plug Gap 5.3L with Active Fuel Automatic 0.040 in (1.01 mm) Management™ 5.3L V8 Flexible Fuel with Active Fuel Management™ Automatic 0.040 in (1.01 mm) (Iron) 5.3L V8 Flexible Fuel with Active Fuel Management™ Automatic 0.040 in (1.01 mm) (Aluminum Block)
Page 477 Section 6 Maintenance Schedule Maintenance Schedule ........6-2 Owner Checks and Services ......6-9 Introduction ...........6-2 At Each Fuel Fill ..........6-9 Maintenance Requirements ......6-2 At Least Once a Month .........6-10 Your Vehicle and the Environment ....6-2 At Least Once a Year ........6-10 Using the Maintenance Schedule ......6-3 Recommended Fluids and Lubricants ....6-13 Scheduled Maintenance ........6-4...
Page 478: Maintenance Schedule
Maintenance Schedule Maintenance Requirements Notice: Maintenance intervals, checks, inspections, Introduction replacement parts, and recommended ﬂuids and lubricants as prescribed in this manual are Important: Keep engine oil at the proper level and necessary to keep your vehicle in good working change as recommended.
Page 479: Using The Maintenance Schedule
Using the Maintenance Schedule The services in Scheduled Maintenance on page 6-4 should be performed when indicated. See Additional Required Services on page 6-6 and Maintenance We want to help you keep your vehicle in good working Footnotes on page 6-7 for further information. condition.
Page 480: Scheduled Maintenance
If you want to purchase service information, see Service If the engine oil life system is ever reset accidentally, Publications Ordering Information on page 7-15. you must service your vehicle within 3,000 miles (5 000 km) since your last service. Remember to reset Owner Checks and Services on page 6-9 tells you what the oil life system whenever the oil is changed.
Page 481 Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and ﬁlter. See Engine Oil on page 5-15. Reset oil life • • system. See Engine Oil Life System on page 5-18. An Emission Control Service. • • Lubricate chassis components. See footnote #. •...
Page 482: Additional Required Services
Additional Required Services The following services should be performed at the ﬁrst maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Additional Required Services 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (40 000) (80 000) (120 000) (160 000)
Page 483: Maintenance Footnotes
Additional Required Services (cont’d) 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (40 000) (80 000) (120 000) (160 000) (200 000) (240 000) Engine cooling system service (or every ﬁve years, whichever occurs ﬁrst). • An Emission Control Service. See footnote (i).
Page 484 (c) Visually inspect hoses and have them replaced if Applying silicone grease on weatherstrips with a clean they are cracked, swollen, or deteriorated. Inspect all cloth will make them last longer, seal better, and pipes, ﬁttings, and clamps; replace with genuine parts as not stick or squeak.
Page 485: Owner Checks And Services
At Each Fuel Fill (k) Inspect system. Check all fuel and vapor lines and hoses for proper hook-up, routing, and condition. Check that the purge valve works properly, if equipped. It is important to perform these underhood checks at Replace as needed. each fuel ﬁll.
Page 486: At Least Once A Month
At Least Once a Month At Least Once a Year Tire Inﬂation Check Starter Switch Check Inspect your vehicle’s tires and make sure they are inﬂated to the correct pressures. Do not forget to CAUTION: check the spare tire. See Inﬂation - Tire Pressure on page 5-64.
Page 487: Ignition Transmission Lock Check
Automatic Transmission Shift Lock 3. With the engine off, turn the ignition to ON/RUN, but do not start the engine. Without applying the Control System Check regular brake, try to move the shift lever out of PARK (P) with normal effort. If the shift lever moves out of PARK (P), contact your dealer/retailer CAUTION: for service.
Page 488: Underbody Flushing Service
Parking Brake and Automatic Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, Transmission Park (P) Mechanism set the parking brake. Check • To check the parking brake’s holding ability: With the engine running and transmission in NEUTRAL (N), slowly remove foot pressure from CAUTION: the regular brake pedal.
Page 489: Recommended Fluids And Lubricants
Recommended Fluids and Usage Fluid/Lubricant Lubricants GM Power Steering Fluid Power Steering (GM Part No. U.S. 89021184, System Fluids and lubricants identiﬁed below by name, part in Canada 89021186). number, or speciﬁcation can be obtained from your ® Automatic DEXRON -VI Automatic dealer/retailer.
Page 490 Usage Fluid/Lubricant Usage Fluid/Lubricant ® DEXRON -VI Automatic Outer Tailgate Multi-Purpose Lubricant, Superlube Transfer Case Transmission Fluid. Handle Pivot (GM Part No. U.S. 12346241, Points in Canada 10953474). Front Axle Propshaft Weatherstrip Lubricant Spline or Spline Lubricant, Special Lubricant (GM Part No. U.S. 3634770, One-Piece (GM Part No.
Page 491: Maintenance Replacement Parts
Maintenance Replacement Parts Replacement parts identiﬁed below by name, part number, or speciﬁcation can be obtained from your dealer/retailer. Maintenance Replacement Parts Part GM Part Number ACDelco Part Number Engine Air Cleaner /Filter High Capacity Filter 15908915 A3085C Standard Filter 15908916* A3086C* Oil Filter...
Page 492: Engine Drive Belt Routing
Engine Drive Belt Routing 6-16...
Page 493: Maintenance Record
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 6-2. Any additional information from Owner Checks and Services on page 6-9 can be added on the following record pages. You should retain all maintenance receipts.
Page 494 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-18...
Page 495 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-19...
Page 496 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-20...
Page 497: Customer Assistance Information
Section 7 Customer Assistance Information Customer Assistance and Information ....7-2 Reporting Safety Defects ........7-14 Customer Satisfaction Procedure ......7-2 Reporting Safety Defects to the Online Owner Center ........7-4 United States Government ......7-14 Customer Assistance for Reporting Safety Defects to the Text Telephone (TTY) Users ......7-5 Canadian Government ........7-14 Customer Assistance Offices ......7-5 Reporting Safety Defects to...
Page 498: Customer Assistance And Information
Your satisfaction and goodwill are important to the windshield. your dealer and to Chevrolet. Normally, any concerns with the sales transaction or the operation of the vehicle • Dealership name and location.
Page 499 Although you may be required to resort to this informal Program. General Motors of Canada Limited has dispute resolution program prior to ﬁling a court action, committed to binding arbitration of owner disputes use of the program is free of charge and your case will involving factory-related vehicle service claims.
Page 500: Online Owner Center
Online Owner Center My GM Canada (Canada only) My GM Canada is a password-protected section of (United States only) gmcanada.com where you can save information on GM vehicles, get personalized offers, and use handy The Owner Center is a resource for your GM ownership tools and forms with greater ease.
Page 501: Customer Assistance For Text Telephone (Tty) Users
Oshawa, Ontario L1H 8P7 Chevrolet encourages customers to call the toll-free www.gmcanada.com number for assistance. However, if a customer wishes 1-800-263-3777 (English) to write or e-mail Chevrolet, the letter should be 1-800-263-7854 (French) addressed to: 1-800-263-3830 (For Text Telephone devices (TTYs)) United States —...
Page 502: Gm Mobility Reimbursement Program
Program For vehicles purchased in Canada, call 1-800-268-6800. Service is available 24 hours a day, 365 days a year. As the owner of a new Chevrolet vehicle, you are automatically enrolled in the Chevrolet Roadside Assistance program. Who is Covered? Roadside Assistance coverage is for the vehicle operator, regardless of ownership.
Page 503: Services Provided
Services Provided • Flat Tire Change: Installation of a spare tire in good condition, when equipped and properly inﬂated, is The following services are provided in the U.S. and covered at no charge. The customer is responsible Canada up to 5 years/100,000 miles (160 000 km), for the repair or replacement of the tire if not covered whichever occurs ﬁrst, and, in Canada only, up by a warrantable failure.
Page 504: Calling For Assistance
250 kilometres from the original point of departure, Chevrolet and General Motors of Canada Limited you may qualify for trip interruption expense reserve the right to limit services or reimbursement assistance.
Page 505: Scheduling Service Appointments
Roadside Assistance is not part of or included in the coverage provided by the New Vehicle Limited Warranty. Courtesy Transportation Chevrolet and General Motors of Canada Limited reserve the right to make any changes or discontinue To enhance your ownership experience, we and our...
Page 506: Transportation Options
Transportation Options Claim amounts should reﬂect actual costs and be supported by original receipts. See your dealer for Warranty service can generally be completed while you information regarding the allowance amounts for wait. However, if you are unable to wait, GM helps reimbursement of fuel or other transportation costs.
Page 507: Additional Program Information
Additional Program Information Collision Parts All program options, such as shuttle service, may not be Genuine GM Collision parts are new parts made with available at every dealer. Please contact your dealer the same materials and construction methods as the for speciﬁc information about availability.
Page 508: Repair Facility
Repair Facility If a Crash Occurs We recommend that you choose a collision repair Here is what to do if you are involved in a crash. facility that meets your needs before you ever need • Check to make sure that you are all right. If you collision repairs.
Page 509 • Managing the Vehicle Damage Repair Gather the important information you will need from the other driver. Things like name, address, phone Process number, driver’s license number, vehicle license plate, vehicle make, model and model year, Vehicle In the event that your vehicle requires damage repairs, Identiﬁcation Number (VIN), insurance company GM recommends that you take an active role in its and policy number, and a general description of...
Page 510: Reporting Safety Defects
General Motors. Call 1-800-222-1020, or write: To contact NHTSA, you may call the Vehicle Chevrolet Motor Division Safety Hotline toll-free at 1-888-327-4236 Chevrolet Customer Assistance Center (TTY: 1-800-424-9153); go to P.O. Box 33170 http://www.safercar.gov; or write to: Detroit, MI 48232-5170...
Page 511: Service Publications Ordering Information
Service Publications Ordering Current and Past Model Order Forms Information Technical Service Bulletins and Manuals are available for current and past model GM vehicles. To request Service Manuals an order form, specify year and model name of the vehicle. Service Manuals have the diagnosis and repair ORDER TOLL FREE: 1-800-551-4123 information on engines, transmission, axle suspension, brakes, electrical, steering, body, etc.
Page 512: Vehicle Data Recording And Privacy
Vehicle Data Recording and Event Data Recorders Privacy This vehicle has an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain Your GM vehicle has a number of sophisticated crash or near crash-like situations, such as an airbag computers that record information about the vehicle’s deployment or hitting a road obstacle, data that will performance and how it is driven.
Page 513: Onstar
Navigation System To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, If your vehicle has a navigation system, use of the other parties, such as law enforcement, that have the system may result in the storage of destinations, special equipment, can read the information if they addresses, telephone numbers, and other trip...
Page 514 NOTES 7-18...
Page 515 Appearance Care Aluminum or Chrome-Plated Wheels ..... 5-104 Accessories and Modiﬁcations ......5-3 Care of Safety Belts ........5-102 Accessory Power Outlets ......... 3-20 Chemical Paint Spotting ......5-106 Adding Equipment to Your Airbag-Equipped Cleaning Exterior Lamps/Lenses ....5-103 Vehicle ............1-74 Fabric/Carpet ..........
Page 516 Audio System (cont.) Theft-Deterrent Feature ....... 3-118 Calibration ..........2-49, 2-52 XM™ Satellite Radio Antenna System ... 3-120 California Fuel ..........5-6 Audio System(s) ..........3-78 California Perchlorate Materials Requirements ..5-4 Automatic Headlamp System ......3-16 California Proposition 65 Warning ....... 5-4 Automatic Transmission Canadian Owners ..........
Page 517 Child Restraints (cont.) Collision Damage Repair ........7-11 Securing a Child Restraint in a Compass ..........2-49, 2-52 Rear Seat Position ........1-53 Content Theft-Deterrent ........2-26 Securing a Child Restraint in the Control of a Vehicle .......... 4-3 Center Front Seat Position ......1-56 Coolant Securing a Child Restraint in the Engine ............
Page 518 Driving (cont.) Recovery Hooks .......... 4-35 Daytime Running Lamps ........3-16 Rocking Your Vehicle to Get it Out ....4-34 Defensive Driving ..........4-2 Winter ............4-31 Delayed Locking ..........2-10 Dual Automatic Climate Control System ..... 3-24 Diesel Running Out of Fuel ........2-48 Rear Seat Entertainment System ....
Page 519 Engine (cont.) Fluid Drive Belt Routing ........6-16 Automatic Transmission ........ 5-22 Engine Compartment Overview ...... 5-14 Power Steering ........... 5-36 Exhaust ............. 2-48 Windshield Washer ........5-37 Fan Noise ..........5-35 Fog Lamp Oil ............. 5-15 Fog ............3-17 Oil Life System ...........
Page 520 Headlamps (cont.) Halogen Bulbs ..........5-53 Gage High/Low Beam Changer ........ 3-9 Engine Coolant Temperature ......3-42 On Reminder ..........3-15 Fuel ............3-49 Heated Seats ........... 1-5 Oil Pressure ..........3-46 Heater ............3-21 Speedometer ..........3-34 Engine Coolant ........... 2-34 Tachometer ..........
Page 521 Light (cont.) Fog Lamp ..........3-48 Jump Starting ..........5-42 Highbeam On ..........3-48 Low Fuel Warning ........3-50 Malfunction Indicator ........3-43 Oil Pressure ..........3-47 Passenger Airbag Status Indicator ....3-36 Keyless Entry System ........2-4 Safety Belt Reminders ........3-34 Keys ...............
Page 522 Low Fuel Warning Light ........3-50 Manual Lumbar Controls ........1-4 Luggage Carrier ..........2-72 Manual Seats ........... 1-2 Lumbar Manual, Using ............. ii Manual Controls ..........1-4 Memory Seat, Mirrors, and Pedals ...... 1-6 Power Controls ..........1-4 Message DIC Warnings and Messages ......
Page 523 Odometer ............3-34 Paint, Damage ..........5-105 Odometer, Trip ..........3-34 Park Off-Road Driving ..........4-12 Shifting Into ..........2-45 Off-Road Recovery .......... 4-10 Shifting Out of ..........2-47 Park Aid ............2-58 Engine ............5-15 Park Brake ............ 2-44 Pressure Gage ..........
Page 524 Privacy ............7-16 Rearview Mirror, Automatic Dimming with ® Event Data Recorders ........7-16 OnStar , Compass and Temperature Display ... 2-49 Navigation System ........7-17 Reclining Seatbacks .......... 1-8 OnStar ............7-17 Recommended Fluids and Lubricants ....6-13 Radio Frequency Identiﬁcation ....... 7-17 Recovery Hooks ..........
Page 525 Service ............5-3 Accessories and Modiﬁcations ......5-3 Safety Belt Adding Equipment to the Outside of Reminder Light ..........3-34 Your Vehicle ..........5-5 Safety Belts California Perchlorate Materials Requirements ..5-4 Care of ............ 5-102 California Proposition 65 Warning ....5-4 How to Wear Safety Belts Properly ....
Page 526 Storage Areas Tire All-Weather Cargo Area ........ 2-85 Pressure Light ..........3-42 Center Console Storage Area ......2-71 Tires ............. 5-56 Center Overhead Console ......2-71 Aluminum or Chrome-Plated Wheels, Cupholders ..........2-71 Cleaning ..........5-104 Front Armrest Storage Area ......2-71 Buying New Tires ........
Page 527 Tow/Haul Mode ..........2-38 Tow/Haul Mode Light ........3-48 Vehicle Towing Control ............4-3 Recreational Vehicle ........4-42 Damage Warnings ........... iv Towing a Trailer .......... 4-47 Loading ............4-36 Your Vehicle ..........4-42 Symbols ............iv Traction ® Vehicle Customization, DIC ......3-66 Stabilitrak System ........
Page 528 Windshield (cont.) Washer Fluid ..........5-37 Warning Lights, Gages and Indicators ....3-32 Wiper Blade Replacement ......5-55 Warnings Wiper Blades, Cleaning ......5-104 DIC Warnings and Messages ......3-59 Wiper Fuses ..........5-108 Hazard Warning Flashers ....... 3-6 Wipers ............3-9 Other Warning Devices ........

Chevrolet 2008 Avalanche Owner's Manual

Section 1 Seats and Restraint Systems

Child Restraints

Airbag System

Restraint System Check

Section 2 Features and Controls

Keys

Doors and Locks

Windows

Theft-Deterrent Systems

Starting and Operating Your Vehicle

Mirrors

Object Detection Systems

Onstar System

Universal Home Remote System

Storage Areas

Sunroof

Section 3 Instrument Panel

Instrument Panel Overview

Climate Controls

Warning Lights, Gages, and Indicators

Driver Information Center (DIC)

Audio System(S)

Section 4 Driving Your Vehicle

Your Driving, the Road, and Your Vehicle

Towing

Quick Links

Chapters

Related Manuals for Chevrolet 2008 Avalanche

Summary of Contents for Chevrolet 2008 Avalanche