Turn Signal/Multifunction Lever; Turn And Lane-Change Signals - Chevrolet 2008 Cobalt Owner's Manual

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
•
G
Turn and Lane-Change Signals. See Turn and
Lane-Change Signals on page 3-7.
•
53 Headlamp High/Low-Beam Changer. See
Headlamp High/Low-Beam Changer on page 3-8.
•
Flash-to-Pass. See Flash-to-Pass on page 3-8.
O
•
Exterior Lamp Control. See Headlamps
on page 3-12.

Turn and Lane-Change Signals

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will return
automatically.
To signal a lane change, raise or lower the lever until
the arrow starts to flash. Hold it there until you complete
your lane change. The lever will return by itself when
you release it.
As you signal a turn or a lane change, if the arrows
flash rapidly, a signal bulb may be burned out and other
drivers will not see your turn signal. If a bulb is burned
out, replace it to help avoid an accident.
If the arrows do not go on at all when you signal a turn,
check the fuse. See Fuses and Circuit Breakers on
page 5-106.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
3-7