Your vehicle has a feature called Retained Accessory
Power (RAP). With RAP, the audio system can be
played even after the ignition is turned off. See Retained
Accessory Power (RAP) on page 2-25 for more
information.
Setting the Clock
Without Date Display
AM/FM Base Radio with a Single CD Player
This type of radio has a
You can set the time by following these steps:
1. Turn the ignition key to ACC/ACCESSORY or
ON/RUN. Press the
center of the radio, to turn the radio on.
H
2. Press the
button until the hour begins flashing
on the display. Press the button a second time and
the minute begins flashing on the display.
H
button for setting the time.
O
knob, located in the
3. While either the hour or the minute numbers are
f
flashing, turn the
right side of the radio, clockwise or counterclockwise
to increase or decrease the time.
H
4. Press the
button again until the clock display
stops flashing to set the currently displayed time;
otherwise, the flashing stops after five seconds and
the current time displayed is automatically set.
To change the time default setting from 12 hour to
H
24 hour, press the
button and then the pushbutton
located under the forward arrow label. Once the
time 12H and 24H are displayed, press the pushbutton
located under the desired option to select the default.
H
Press the
button again to apply the selected default,
or let the screen time out.
knob, located on the upper
3-55