Gigabyte GN-AP02G User Manual page 31

WDS (Wireless Distribution System) OperationMode
The Access Point supports three operation modes: "Access Point", "Point to
Point", "Point to MultiPoint". The default operation mode is "Access Point".
Access Point
The operational mode is set to Access Point by default. This connects
your wireless PCs to a wired network. In most cases, no change is
necessary.
Point to Point Mode
In this WDS supported mode, the Access Point can communication with
other GIGA-BYTE Access point which is also set to Point to Point and
MultiPoint mode. You have to enter the MAC address of the host AP.
Point to MultiPoint Mode
In this WDS supported mode, the Access Point can communication with
other GIGA-BYTE Access point which is also set to Point to Point and
MultiPoint mode.
Associated List Page
From this page, you will get the information of the workstation which can
connect to the AP. The form list includes the MAC Address, Signal level and
description of the workstation.