Table of Contents
Advertisement
Auto Rate
In this item you can select either "Enable" or "Disable" The default value is
"Enable".
Enable If the selection is "Enable", the transfer rate will automatically
change to the optimum rate allowed. The range of auto-change will base
on the setting of "Transmit Rate".
Transmit Rate setting:
54M : range is among 6M, 9M, 12M, 18M, 24M, 36M, 48M and 54M
48M : range is among 6M, 9M, 12M, 18M, 24M, 36M and 48M
36M : range is among 6M, 9M, 12M, 18M, 24M and 36M
24M : range is among 6M, 9M, 12M, 18M and 24M
18M : range is among 6M, 9M, 12M and 18M
12M : range is among 6M, 9M and 12M
9M : range is between 6M and 9M
6M : no auto-change. The transmit rate is fixed at 6M.
Disable There is no transfer rate auto-change. The transfer rate will be
defined by the "Transmit Rate" column.
Hidden ESSID
This setting allows you to hide the ESSID in wireless transmission. Those
who don't know the ESSID will not be able connect to the AP. The default
value is "Disable".
RTS Threshold
This value should remain at its default setting of 2347. Should you
encounter inconsistent data flow, only minor modifications are
recommended. The setting range is 0 ~ 2347.
ESSID
The ESSID or SSID is the name represent the AP in the wireless network.
The ESSID of all AP in your network should set to identical for the mobile
client can roam between access points. This ESSID string is case
sensitive of up to 32 ASCII characters.
Verify the desired setting and then click the "Apply" button to set the value into
access point.
Advertisement
Table of Contents
