Table of Contents
Advertisement
If the 802.1x -Dynamic WEP option is selected, the Radius/WPA page will
appear as shown below.
RADIUS server IP
RADIUS Port
RADIUS sercet
RADIUS Re-Key
Verify the desired setting and then click the "Apply" button to set the value into
access point.
WPA
if you have been using Wi-Fi for a while, you are probably
familiar with the 802.1X authentication protocol. This protocol
allows users to authenticate into a wireless network by means
of a RADIUS Server. In standard Wi-Fi, 802.1X authentication
is optional. However, 802.1X authentication is a requirement
for WPA. If your environment does not have a RADIUS server
in place, you can still use WPA in spite of the 802.1X
requirement. As an alternative to RADIUS, WPA supports the
use of a preshared key.
Please assign a IP address to the primary RADIUS
server(authentication server).
The setting range is 1~65536 and the default value
is 1812.
This filed can key in up to 256 character.
Under this option two setting are possible: "Enable"
or "Disable". The default value is "Enable".
Advertisement
Table of Contents
