Gigabyte GN-AP02G User Manual page 17

Tool bar
Find Access Point
Find all AP in the same subnet.
Save AP Configuration
Save all setting of the AP to a temp file.
Load AP Configuration
Load the setting of the temp file that you saved before to the
current AP.
Page Copy
Copy the setting of the current page.
Page Paste
Paste the setting you has copied to the current page.(You can
paste the setting of AP1 to AP2 at the same tab page.)
System Reboot
Reboot the Access Point.
Load Default
Set the Access Point to the manufacture default.
Connect to AP by IP
If you want to manage the AP in the different subnet, use this
function and key in the IP.