Table of Contents
Advertisement
When WPA option is selected, the Radius/WPA page will appear as shown
below.
WPA Algorithm
RADIUS server IP
RADIUS Port
RADIUS sercet
WPA Re-Key
WPA Re-Key Interval Enter a Rekey Interval (normally the unit is
Verify the desired setting and then click the "Apply" button to set the value into
access point.
There are three settings you can select : "TKIP",
"AES" and "Auto".
Please assign a IP address to the primary RADIUS
server(authentication server).
The setting range is 1~65536 and the default value
is 1812.
This filed can key in up to 256 character.
Under this option two setting are possible: "Enable"
or "Disable". The default value is "Enable".
seconds).
Advertisement
Table of Contents
