Table of Contents
Advertisement
IP Config Page
The IP Configure tab allows you to configure the IP parameters of the access
point.
IP Address
Use this option to assign an IP address to the access point. The
default IP address is 192.168.1.1. Please make sure the assigned
IP address is unique on your network.
Subnet Mask
Specify the subnet mask of the access point. The default subnet mask is
255.255.255.0.
Gateway
Enter the IP address of the default route. The default gateway is
192.168.1.254.
After you change the IP address of the AP, please also change the PC (AP
Manager) IP address to the same subnet. And then click the "Find Access
Point" icon; AP manager will search the AP on the network.
DHCP Mode
There are four settings under this option you can choose: "Disabled",
"Client Enabled", "Server Enabled" and "Auto". Disabled is the default
setting.
Advertisement
Table of Contents
