Related Manuals for Gigabyte AirCruiser MIMO GN-AP03GM
Summary of Contents for Gigabyte AirCruiser MIMO GN-AP03GM
- Page 1 GN-AP03GM AirCruiser MIMO Access Point User’s Manual www.gigabyte.com.tw December 2005 Revision 1.0...
- Page 2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 3: Table Of Contents
GN-AP03GM AirCruiser MIMO Access Point Contents Chapter 1 Introduction ..............4 Overview ......................4 Features......................4 Package Contents..................... 5 GN-AP03GM Rear Panel .................. 5 Front Panel ....................... 6 Chapter 2 QUICK INSTALLATION..........7 Hardware Requirements ................... 7 System Requirements..................7 Internet Configuration Requirements .............. -
Page 4: Chapter 1 Introduction
GN-AP03GM AirCruiser MIMO Access Point Chapter 1 Introduction Overview The GN-AP03GM AirCruiser MIMO (Multi-Input & Multi-Output) Access Point includes several devices in one box. First, there's the Wireless Access Point, which lets you connect Wireless-G or Wireless-B devices to the network. There's also a built-in one port full-duplex 10/100 Ethernet port to connect your wired-Ethernet devices. -
Page 5: Package Contents
GN-AP03GM AirCruiser MIMO Access Point Package Contents Before installation, please ensure the components are not damaged during the shipping. The package contents of the GN-AP03GM shall include: • One GN-AP03GM AirCruiser MIMO Access Point • One Power Adapter • One installation CD contains AP Manager and User’s Guide •... -
Page 6: Front Panel
GN-AP03GM AirCruiser MIMO Access Point Front Panel LED’s The AirCruiser MIMO Access Point’s LED displays information about the AP’s status. Power on (Green LED) When the LED is on, the power is supplied to GN-AP03GM. Note: When you change the settings and save them, the power LED will be temporarily off. -
Page 7: Chapter 2 Quick Installation
GN-AP03GM AirCruiser MIMO Access Point Chapter 2 QUICK INSTALLATION Hardware Requirements Suggested Computer specifications for AirCruiser MIMO Access Point installation: • A PC or Macintosh Computer • One installed 802.11b/g wireless PCI LAN adaptor • An Ethernet router or hub •... -
Page 8: Hardware Installation
GN-AP03GM AirCruiser MIMO Access Point Hardware installation Follow the steps below when installing your Access Point(s). (hereafter refered to as APs) Connecting your AP for initial configuration may be done by wired or wirelessly, however it is STRONGLY SUGGESTED you follow “Connecting with wired Ethernet”... -
Page 9: Assigning An Ip Address To Your Access Point
Note: If using a wireless connection, please refer to the user manual of the wireless adapter to install. The SSID of the wireless adapter and the GN-AP03GM should be identical. The default SSID assigned to the GN-AP03GM is GIGABYTE. (WARNING: The SSID field is case sensitive, so for example “a” is different from “A”). - Page 10 Obtain an IP address automatically – DHCP server is enabled If a DHCP server is used on the network, it can connect to APs and the Gigabyte AP Manager through a router or hub. You should set the IP address of AP as “Obtain an IP address automatically”.
- Page 11 GN-AP03GM AirCruiser MIMO Access Point the PC (AP Manager) as “Obtain an IP address automatically” and assign IPs with the same DHCP. DHCP Server Converter/Hub Access Point Note: You can also use Gigabyte AP Manager to connect APs through a Wireless LAN adaptor.
-
Page 12: Chapter 3 Configuration - Using Ap Manager
Chapter 3 Configuration - Using AP Manager There are two methods of setting up the AP: Using the web-based configuration, or using Gigabyte’s AP Manager Utility. AP Manager is only used for Gigabyte Access Points. This Chapter will introduce how to set up APs through AP Manager. - Page 13 GN-AP03GM AirCruiser MIMO Access Point Step 4: Enter users name and company name then click “Next”. Step 5: Choose Destination Location. Click “Next” to accept default directory or click “Browse” to specify a different install directory.
- Page 14 GN-AP03GM AirCruiser MIMO Access Point Step 6: Create a Program Folder. Click “Next”. Step 7: Copy program files to your Hard Drive. Click “Next”.
- Page 15 GN-AP03GM AirCruiser MIMO Access Point Step 8: Setup status will display progress bar. Wait a moment. Step 9: Click “Finish” to complete the installation.
-
Page 16: Using Access Point Manager
Manager Utility/Gigabyte AP Manager to launch the Gigabyte AP Manager. Enter the default password “admin” and click “OK”. When you open Gigabyte AP Manager, it will automatically search for AP in the same Subnet. You can also double click the icon in the Tool bar to manually search for any AP. - Page 17 GN-AP03GM AirCruiser MIMO Access Point Task bar Tool bar Tree Structured Page control review Status bar The Task Bar Tool: Allows you to “Search” AP and “Connect to AP by IP” through ESSID, AP name, MAC address and IP address. It also allows you to “Save”...
- Page 18 GN-AP03GM AirCruiser MIMO Access Point The Tool bar Find Access Point Find all APs in the same Subnet. Save AP Configuration Save AP configurations in a temporary file. Page Copy Copy configuration for current page. Page Paste Paste copied content to the current page. (You may paste the settings from AP1 to AP2 on the same bar tab.) System Reboot Reboot AP.
- Page 19 GN-AP03GM AirCruiser MIMO Access Point System Page The system page main topics are “Device Information” and “Change Community String”. ♦ Device Information “Device Information” includes AP names, MAC addresses, description, version, wireless type and card configuration type. 1. You may change “AP name” to any name in order to specify the AP. 2.
- Page 20 GN-AP03GM AirCruiser MIMO Access Point Note: SNMP community string defines the relationship between SNMP AP Manager and agent systems (all APs) and controls the access of AP Manager to APs with password. The default value is “public”. Go to Task Bar -> Password -> Set Commuinity String and change the community string for AP Manager.
- Page 21 GN-AP03GM AirCruiser MIMO Access Point ♦ DHCP Mode Four options are available here: “Disabled”, “Client Enabled” , “Server Enabled” and “Auto”. The default setting is “Auto”. If you want to obtain IP addresses from a DHCP server, select “Client Enabled”. To use an AP as a DHCP server and assign a dynamic IP address automatically on the network, select “Server Enabled”.
- Page 22 GN-AP03GM AirCruiser MIMO Access Point The wireless equipment still can operate smoothly with no changes made for any options on this page. ♦ Region In that different regions have different open channel regulations; please check whether the default value for the region is suitable for your local area. In case of incompatibility, please contact your local distributor or authorized reseller immediately.
- Page 23 GN-AP03GM AirCruiser MIMO Access Point ♦ RTS Threshold The default value of “2346” should not be changed. However, in case of inconsistent data flow, adjustment the value to a lower number and retry. Enter a value within the range 0~2346 for the port. RTS (Request To Send) is a function, requesting permission to transmit signals.
- Page 24 GN-AP03GM AirCruiser MIMO Access Point Encryption Page In this page you may secure your network by using WEP (Wired Equivalent Privacy) “802.11b/g standard of 64/128 bytes”. Select Disable to disable WEP encryption. When “64bits” or “128bits” is selected, the data transmitted will be encrypted and unauthorized users will be prevented from accessing the wireless network.
- Page 25 GN-AP03GM AirCruiser MIMO Access Point regardless of the needs of 802.1x, you can use WPA. As another option for RADIUS server, WPA supports pre-shared key. WPA/WPA2-PSK WPA Pre-shared key. Traditional WEP has an inconvenient method to change encrypted keys. Even you change encrypted keys;...
- Page 26 GN-AP03GM AirCruiser MIMO Access Point WPA/WPA2 Algorithm Two settings are possible: TKIP or AES. RADIUS server IP Please assign an IP address to the primary RADIUS server (authentication server). RADIUS Port The setting range is 1~65536 and the default value is 1812.
- Page 27 GN-AP03GM AirCruiser MIMO Access Point “enable”. WPA/WPA2 PSK Interval Enter a value for re-key interval (unit: minutes). Verify the desired settings and then click the “Apply” button to set the value in the access point. 64 (40) Bits / 128 (104) Bits There are three levels of encryption 64 bits, 128 bits and 152 bits.
- Page 28 GN-AP03GM AirCruiser MIMO Access Point Advanced Page To enhance the security of the wireless network, this AP provides MAC address filtering mechanism to prevent the unauthorized access from specific physical network addresses. To invoke, check “Enable MAC filter” and key into the MAC address table those MAC address you wish to allow connection to this AP.
- Page 29 WDS in the “Point to Point” mode. In this WDS supported mode, the Access Point can communicate with other Gigabyte Access Point that is also set to “Point to Point” mode. You have to enter the MAC address of the host AP.
- Page 30 WDS list in “Point to MultiPoint”. In this supported WDS mode, the Access Point can communicate with other Gigabyte Access Points that are also set to “Point to Multi-Point” mode. Click the “WDS List” tab to enter the “WDS List”...
- Page 31 GN-AP03GM AirCruiser MIMO Access Point Click “Scan” button to display “Scan Window”. You can select which Access Point you want or choose “Select All” check box, and then click “OK” to add those MAC address into the WDS list. Click the “Edit” button to modify MAC address that you select on the WDS...
- Page 32 GN-AP03GM AirCruiser MIMO Access Point Associated List Page From the Associated List page, the information related to the client that will connect to the Access Point may be edited. The page includes the MAC address, signal level, and description of the workstation.
- Page 33 GN-AP03GM AirCruiser MIMO Access Point Quality of Service. Required to support wireless multimedia applications and advanced traffic management. QoS enables Wi-Fi access points to prioritize...
- Page 34 GN-AP03GM AirCruiser MIMO Access Point traffic and optimize the way shared network resources are allocated among different applications. WIth this feature, users can set the data frame transmission priority for Audio, Video, Background information and Best-Effort to achieve the best performance from your applications.
-
Page 35: Uninstall Ap Manager Utility
Step 2: To confirm uninstall, click “Yes”. Step 3: Gigabyte AP Manager Utility has been uninstalled successfully. Click “OK”. If you want to modify or repair the installation or reinstall all program components, you can run the installation program again. The InstallShield Wizard will appear on the screen. - Page 36 GN-AP03GM AirCruiser MIMO Access Point...
-
Page 37: Chapter 4 Configuration - Using Your Web-Browser
GN-AP03GM AirCruiser MIMO Access Point Chapter 4 Configuration - Using your Web-Browser This section explains the web-based configuration method of setting up the AP with RJ45 Ethernet cables and computers connected to the AP. Any Internet Explorer 5.0 or above or Netscape Communicator 6.0 or above may be used to administer the AP. - Page 38 GN-AP03GM AirCruiser MIMO Access Point Wireless Basic Settings The AP will automatically detect your wireless settings. Typically, modification to the default settings is required. Changes of these settings will influence your wireless connection and performance. ♦ SSID ESSID (or SSID as it is usually referred to) is the network name of the AP in the wireless network.
- Page 39 GN-AP03GM AirCruiser MIMO Access Point ♦ Transmit Rate Select the desired data rate. The default rate is set to “Auto”. ♦ Hidden ESSID This setting enables you to hide ESSID name, which is needed by clients in order to connect to the AP. The default value is “Disable”. In this setting, all users are able to read your AP’s SSID name.
- Page 40 Only one Access Point can be assigned to connect with WDS in the “Point to Point” mode. In this WDS supported mode, the Access Point can communicate with other Gigabyte Access Point that is also set to “Point to Point” mode. You have to enter the MAC address of the host AP.
- Page 41 GN-AP03GM AirCruiser MIMO Access Point communicate with other Gigabyte Access Points that are also set to “Point to Multi-Point” mode. WDS technologies between AP manufactures vary, so you may not be able to establish WDS if you use APs of different brand names.
- Page 42 GN-AP03GM AirCruiser MIMO Access Point Wireless Access Control You may specify users based on their MAC addresses that are authorized to connect to the AP. Only computers listed in the table can connect to AP when this function is enabled. TCP/IP Settings You may set up IP parameters for APs through TCP/IP setting screen.
- Page 43 GN-AP03GM AirCruiser MIMO Access Point ♦ Subnet Mask Please assign a Subnet Mask for an AP. The default Subnet Mask is 255.255.255.0. ♦ Gateway Please enter the IP address for the default router. The default gateway is 192.168.1.254. After changing the IP address for AP, please change the PC’s IP address (AP Manager) so that both have the same Subnet Mask.
- Page 44 GN-AP03GM AirCruiser MIMO Access Point System Settings-Password Setup Here you can set up administrator’s user name and password to protect administrative access the AP. Key in a password and confirm, then press Apply Changes. Note, if you leave the password fields blank, password feature is disabled.
- Page 45 GN-AP03GM AirCruiser MIMO Access Point System Settings-Save/Reload Settings You may save the current configuration as a file for restoring configuration in the future. You may press “Reset” to restore to factory default. Statistics Statistics shows you the packets flow status on the wireless LAN and Ethernet.
- Page 46 GN-AP03GM AirCruiser MIMO Access Point Upgrade Firmware You can upgrade the firmware for AP with the Upgrade Firmware screen. The latest firmware version can be downloaded from Gigabyte website. Reboot Reboot the GN-AP03GM. The system may need up to a minute to save your settings, please allow the system to reboot itself.
-
Page 47: Chapter 5 Troubleshooting
GN-AP03GM AirCruiser MIMO Access Point Chapter 5 Troubleshooting This chapter gives information about troubleshooting your wireless Access Point. Read the descriptions below to help you diagnose and solve the problem. Q: What to do if you forget your password or forget the IP address of the Access Point? A: Please press and hold for 5 seconds the “init”... - Page 48 GN-AP03GM AirCruiser MIMO Access Point which is the mandatory provisions have been made within the standard to make it inherently compatible with the well-established 802.11b standard at 11 Mbps, which uses Complementary Code Keying (CCK) modulation. Both .11g and .11b can operate at ranges of up to 300 feet.
-
Page 49: Appendix A: Glossary
GN-AP03GM AirCruiser MIMO Access Point Appendix A: Glossary 802.11e An IEEE standard that adds Quality of Service (QoS) features and multimedia support to the existing 802.11b, 802.11g, and 802.11a wireless networks. Access Point An Access Point is a wired controller that sends data to the wireless NIC’s installed in your network computers, and received data back from them. - Page 50 GN-AP03GM AirCruiser MIMO Access Point Quality of Service. Required to support wireless multimedia applications and advanced traffic management. QoS enables Wi-Fi access points to prioritize traffic and optimize the way shared network resources are allocated among different applications. Without QoS, all applications running on different devices have equal opportunity to transmit data frames.
-
Page 51: Appendix B: Specifications
GN-AP03GM AirCruiser MIMO Access Point Appendix B: Specifications Physical Interface The Access Point includes one RJ-45 Ethernet LAN ports, one init button and two antenna. Item Contents Description LAN Port x 1 RJ-45, Auto-sensing for 10/100M Ethernet LAN connection. Reset Button (Init to factory default) Initial reset Antenna... - Page 52 64/128 bit WEP; WPA-PSK, WPA,WPA2 Management Utility WEB Configuration for network link Mechanical Packaging Generic, Gigabyte, private labeling optional LED indicator Power/Status, Wireless, LAN Port 264 ± 1g Gross Weight 161 mm * 152 mm * 28 mm ± 0.5mm...
-
Page 53: Appendix C: Configuration Of The Pcs
GN-AP03GM AirCruiser MIMO Access Point Appendix C: Configuration of the PCs To connect to the AP, your computer needs to be located in the same Subnet as the AP. Please follow the instructions to perform the setup under the TCP/IP network environment. By default, Windows 98, Me, 2000 and XP already have TCP/IP installed. - Page 54 GN-AP03GM AirCruiser MIMO Access Point Step 3. Double-click the “LAN CONNECTION” and click the “Properties” button. Step 4. The “Local Area Connection Properties” dialog box will appear. Verify that the Internet Protocol (TCP/IP) item is checked. Then double-click on Internet Protocol (TCP/IP).
-
Page 55: Tcp/Ip Settings Under Windows Xp
GN-AP03GM AirCruiser MIMO Access Point Step 5. Assign the static IP address used by the AP and the same Subnet Mask to the computer (For example, IP address is 192.168.1.2 and Subnet Mask is 255.255.255.0), click the “OK” button to return to Local Area Connection Properties. Click the “OK” button again to complete the PC configuration. - Page 56 GN-AP03GM AirCruiser MIMO Access Point Step 2. Double-click the “Network Connections” icon. Step 3. Double-click the “LAN CONNECTION” and click the “Properties” button. Step 4. The “Local Area Connection Properties” dialog box will appear. Verify that the Internet Protocol (TCP/IP) item is checked. And then double-click on “Internet Protocol (TCP/IP)” item.
- Page 57 GN-AP03GM AirCruiser MIMO Access Point Step 5. Assign the static IP address used by the AP and the same Subnet Mask to the computer (For example, IP address is192.168.1.2 and Subnet Mask is 255.255.255.0), click the “OK” button to return to “Local Area Connection Properties”. Click the “OK” button again to complete the PC configuration.
- Page 58 This warranty is null and void if the product is damaged in the process of being installed or improperly used. GIGABYTE may replace or repair the product with either new or reconditioned parts. Repaired or replaced products will be returned to you at the same revision level as received or higher at GIGABYTE’s option.