Table of Contents
Advertisement
6.6
Registering a destination
Settings
[SSL Settings]
[Port No.]
The registered content of [IP Address Fax]
Settings
[Destination]
[Port Number]
[Destination Machine
Type]
The registered content of [Internet Fax]
Settings
[E-Mail Address]
[RX Ability (Destination)]
Tips
-
To check the settings for a registered destination, select its registered name, then tap [Check Job Set.].
-
To change the settings for a registered destination, select its registered name, then tap [Edit].
-
To delete a registered destination, select its registered name, then tap [Delete].
-
To use the [Fax] or [IP Address Fax] function, the optional Fax Kit is required. In some areas, bizhub
C3851FS/C3851 provides the Fax Kit as standard.
bizhub C3851FS/C3851/C3351
Description
When SSL is used in your environment, select [ON].
[OFF] is specified by default.
If necessary, change the port number.
In normal circumstances, you can use the original port number.
[80] is specified by default.
Description
Enter the destination IP address or host name.
•
Example of IP address (IPv4) entry: "192.168.1.1"
•
Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
•
Example of host name entry: "host.example.com" (Also enter a domain
name.)
You can also specify a destination by E-mail address. To specify a destination
by E-mail address, enter the destination IP address or host name following "ip-
addrfax@".
To enter an IP address following the @ symbol, put the IP address in brackets
"[ ]".
•
Example of IP address (IPv4) entry: "ipaddrfax@[192.168.1.1]"
To enter an IP address (IPv6), enter "IPv6:" following left bracket "[ ".
•
Example of IP address (IPv6) entry: "ipad-
drfax@[IPv6:fe80::220:6bff:fe10:2f16]"
To enter a host name following the @ symbol, brackets "[ ]" are unnecessary.
•
Example of host name entry: "ipaddrfax@host.example.com"
If necessary, change the port number.
In normal circumstances, you can use the original port number.
[25] is specified by default.
Select whether the recipient machine supports color print.
[Monochrome] is specified by default.
Description
Enter the E-mail address as a destination.
If prefixes and suffixes are registered, you can recall a registered domain name
etc. to complement entry.
Select the specifications of original data that the recipient machine can receive
in [Compression Type], [Paper Size] and [Resolution].
6
6-23
- Quick Links:
- Installation
Hide quick links:
Advertisement
Table of Contents
