Second Ptt Function - Kenwood ProTalk TK-3701D User Manual

Apart from the channel you normally select, you can use another channel (Second
PTT channel) with a dedicated [Second PTT].
• The Second PTT function can be activated by your dealer.
Operation
Press the button programmed as [Second PTT] to move to the second PTT
1
channel.
After moving to the second PTT channel, press and hold the button
2
programmed as [Second PTT] to start transmission.
• When transmitting with the second PTT channel, the second channel tone
will sound if "Second Channel Tone" is enabled.
• If "Second PTT Transmit Time" is set ("1" second or "Immediate"),
transmission starts when that time elapses.
Release the button programmed as [Second PTT], return to previous normal
3
selected channel.
• If "Second Channel Hold Time" is set ("1" ~ "10" seconds or "Immediate"),
the second PTT channel is held until that time elapses.
Second Channel Scan
"Scan Type" is set to "Second Channel", it alternately scans the second PTT
channel with the channel you normally select.
• The second channel scan cannot be used with the priority scan.

SECOND PTT FUNCTION

26