Common Id Setup (Digital) - Kenwood ProTalk TK-3701D User Manual

COMMON ID SETUP (DIGITAL)

Common ID is a signaling system designed for Digital communications. When
a channel is setup with an ID, squelch will only open when a call containing a
matching Common ID is received. If a call containing a different Common ID is
made on the same channel you are using, you will not hear the call. This allows you
to ignore (not hear) calls from another parties who are using the same channel.
To change the ID settings of a channel of Digital:
During Setup Mode Selection, rotate the Selector to select a channel number.
1
• The transceiver announces the zone number and channel number.
Press the Side 1 or Side 2 button to select the Common ID Setup Mode.
2
• The transceiver announces "ID".
Press the PTT switch to enter the Common ID setup mode.
3
• The transceiver announces the ID number (1 to 255).
Press the Side 1 or Side 2 to increment/ decrement the ID number.
4
• Press and hold the Side 1 or Side 2 button to increment/ decrement the ID
number by 5 at a time.
• A voice announcement will inform you of the currently selected ID number.
Press the PTT switch to temporary save the selected ID number.
5
• Beep B (2 beeps) will sound.
• Repeat steps 1 to 5 to set up another channel.
Press the Side 1 or Side 2 button to select the Confirmation Setup Mode.
6
• The transceiver announces "Confirm".
Press the PTT switch to save the settings and return to the Zone Selection.
7
• Beep B (2 beeps) will sound.
Turn the transceiver power OFF and then ON again to activate the new settings.
8
Note:
◆ If no action is performed for 20 seconds, the transceiver will automatically return to
normal operation without changing any settings.
18