Zone Selection - Kenwood ProTalk TK-3701D User Manual

ZONE SELECTION

With the transceiver power OFF, press and hold the PTT switch and Side 1
1
button while turning the transceiver power ON.
• Continue to hold the PTT switch and Side 1 button until the LED lights
yellow and the transceiver announces "Self".
Release the PTT switch and Side 1 button.
2
• The transceiver announces "Zone 1".
Press the Side 1 or Side 2 button to select a zone number.
3
• A voice announcement will inform you of the currently selected zone number.
Press the PTT switch to decide current selected zone and enter to the Setup
4
Mode Selection.
• A voice announcement will inform you of the currently selected zone number
and channel number "Zone X" (X = 1 to 3 for zone number), "Channel X" (X =
1 to 16 for channel number).
Go to "FREQUENCY SETUP" {p. 14}, "QT/DQT SETUP (ANALOGUE)" {p.
5
16}, or "COMMON ID SETUP (DIGITAL)" {p. 18}.
Note:
◆ If no action is performed for 20 seconds, the transceiver will automatically return to
normal operation.
13