Rear Panel - Datavideo ITC300HP2K Instruction Manual

Rear Panel

The ITC-300 is a standalone model supporting 8 channel communication. It also powers
the belt pack directly.
Belt Pack Channel Ports
Each of the 8 channels has an Ethernet connector that carries bi-directional signals
between the ITC-300 and the ITC-300SL.
carried though the same Ethernet cable
After connecting the ITC-300SL to the Ethernet port, the belt pack must be paired to
the corresponding channel button of the ITC-300. See the section on
Procedure for details.
Volume Control
Controls the volume of the built-in speaker or audio
output to the headphone or MIC headset (whichever is
connected).
Built-In Speaker
Sounds audible alert when a channel is paging and
provides audio during talkback conversations.
Note: Speaker is disabled when headphone or MIC
headset is connected to the ITC-300.
USB Light Socket
For powering the connected USB gooseneck light
(supplied).
Power, tally and bi-directional audio are all
(supplied).
13
Pairing