Rear Panel - Datavideo ITC-100 Instruction Manual

Rear Panel

Channel Input/Output XLR Ports
Each of the 8 channels has an XLR connector
that carries bi-directional signals between the
Power, tally and bi-
ITC-100 and the ITC-100SL.
directional audio are all carried though the
same 5 PIN XLR to XLR cable (supplied).
Tally Inputs A&B
Tally Inputs A & B provide direct connection to
the Datavideo switcher. They supply bi-color
tally information to the ITC-100SL; RED
indicates Live and GREEN indicates Cued.
Tally Input A carries bicolor tally information of
Channels 1 ~ 4 and Tally Input B carries bicolor
tally information of Channels 5 ~ 8.
DC Power Input 12V 8W
DC in socket connects the supplied 12V / 8W
PSU. The connection can be secured by screwing
the outer fastening ring of the DC In plug to the
socket.
Ground Terminal
When connecting this unit to any other
component, make sure that it is properly
grounded by connecting this terminal to an
appropriate point. When connecting, use the
socket and be sure to use wire with a cross-
sectional area of at least 1.0 mm².
11