Advertisement
Quick Links
Advertisement
Related Manuals for Datavideo ITC-100SL
Summary of Contents for Datavideo ITC-100SL
-
Page 2: Warranty
DVD Drives, Hard Drives are only covered for the first 10,000 hours, or 1 year (whichever comes first). Any second year warranty claims must be made to your local Datavideo office or one of its authorized Distributors before the extended warranty... -
Page 3: Packing List
Datavideo office. Packing List 1 x TD -2 Tally Light 1 x MC-1 Headset / Microphone 1 x ITC-100SL Slave Unit 1 x 20m XLR to XLR Intercom Cable 1 x GPI cable 1 x 36cm Black Velcro 1 x 3.5Ø... -
Page 4: Itc-100Sl Slave Unit
ITC-100SL Slave Unit XLR Connection Connects the ITC-100SL to the ITC-100 Base Station. Power, tally and bi-directional audio are all carried through the same cable. Call Button Sends a paging message to the ITC-100 Base Station. The channel button will flash orange and there will be an... - Page 5 Adjusts the volume of the headphones. Mic / Headphone Socket The ITC-100SL has both a 3.5mm and 2.5mm Mic / Headset socket. A standard 3.5mm Mic / Headset can be used, or a Motorola type 2.5mm Mic / headset could be...
- Page 6 External Tally LED Socket An external tally display (TD-2) can be connected to the ITC-100SL. This enables the tally light to be positioned in a more convenient place, such as on top of the camera. When the channel is LIVE the LED will be RED, and when the channel is CUED the LED will be AMBER.
-
Page 7: Specification
Specification INPUT 5 Pin XLR Connector MIC / 3.5mm Stereo Jack Socket for combination HEADSET Headphone / Microphone SOCKET Headset Impedance 8~600 ohms 100mW(min) Microphone Level -67dB 2.5mm Stereo Jack Socket, for Motorola Mobile Phone type headset / microphone FREQUENCY 550-3.6KHz, <...