Table of Contents
Advertisement
3.
To clear one particular channel's current channel assignment, press and hold the
channel button for more than 3 seconds.
4.
Once cleared, the channel button LED will flash green three times, indicating that
the settings have been cleared.
Note: No action needs to be taken on the belt pack.
Noise Reduction
If you hear excessive background noise, enabling the noise reduction feature lowers
the noise level. Follow the steps outlined below to enable the noise reduction feature
and switch to high level noise reduction.
1.
While the belt pack is turned ON, press and hold the TALK button.
2.
Turn ON the power.
3.
Let go of the TALK button when you see the PWR and LINK LEDs flash once.
4.
The noise reduction level has been changed.
5.
Different tally light colors represent different noise reduction levels.
Green: Normal reduction
Red: High reduction
20
Advertisement
Table of Contents
