Connections and Controls
Front Panel
Rear Panel
CASCADE OUT
Connect the ITC-200E CASCADE OUT to CASCADE IN of the
ITC-100 to connect the ITC-200E and the ITC-100 in a cascade
arrangement, which allows you to control the two machines at
the same time.
DC Power Input 12V
DC in socket connects the supplied 12V PSU. The connection can
be secured by screwing the outer fastening ring of the DC In
plug to the socket.
Channel Input / Output XLR Sockets
Each of the 8 channels has an XLR connector that carries
bi-directional signals between ITC-200E and ITC-100SL. All
connections are contained within one cable. Tally C supplies
tally light information to Channels 9 ~ 12 and Tally D supplies
tally light information to Channels 13 ~ 16.
Tally Inputs C & D
Tally Inputs C & D are configured for direct connection to the
Datavideo RMC-140, RMC-90 or SE-500. They supply bi-color
tally information to the ITC-100SL;
indicates Cued. Tally C sends information to channels 9 ~ 12 and
Tally D sends information to channels 13 ~ 16
6
RED
indicates Live and
Green