Operation - Greenlee DVC-6 Instruction Manual

Operation

1. See Typical Measurements for illustrations.
2. See the Test Table for test instructions.
3. Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning circuit, replace the
batteries.
• If the unit still does not function as expected, send the unit to Greenlee for repair.
4. Take the reading from the unit to be tested. The LEDs illuminate as follows:
LED Table
LED Illuminated
LED 1
LED 2
LED 1 and LED 2 AC of 12 V or more
Other Voltage LEDs
/ Rx
GFCI
* Continuous tone for continuity. Tone for voltage is described above.
DVC-6
Indication
DVC-6
Positive (+) DC Positive (+) DC
of 12 V or more of 120 V or more
Negative (–) DC Negative (–) DC
of 12 V or more of 120 V or more
AC of 120 V or more
Approximate voltage level
Continuity or voltage present
GFCI test in progress
LED 1
LED 2
LED 1
LED 2
DVC-6 • DVC-10
Tone
DVC-10
None
Continuous
Warbling
—
*
—
DVC-10
7