Greenlee DVC-6 Instruction Manual page 2

Voltage and continuity testers
Table of Contents

Advertisement

Available languages

Available languages

Description
The Greenlee DVC-6 and DVC-10 Voltage and Continuity Testers are intended to measure
voltage, verify continuity, and test diodes. Each model has LEDs to indicate common voltages,
and stow away leads. These testers can trip a ground fault circuit interrupter (GFCI) and are
equipped with a flashlight.
In addition, the DVC-10 has an easy-to-read LCD.
Safety
Safety is essential in the use and maintenance of Greenlee tools and equipment. This
instruction manual and any markings on the tool provide information for avoiding hazards and
unsafe practices related to the use of this tool. Observe all of the safety information provided.
Purpose
This instruction manual is intended to familiarize all personnel with the safe operation and
maintenance procedures for the Greenlee DVC-6 and DVC-10 Voltage and Continuity Testers.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no charge.
and
are registered trademarks of Greenlee Textron.
KEEP THIS MANUAL
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvc-10

Table of Contents